|
| 1 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 2 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins,arches, pillars, etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar (1:6) complete all as specified and as directed. |
| 4 | M&L for half brick work burnt modular bricks built in cement mortar (1:4) straight or curved on plan exceeding 6mtr mean radius and complete all as specified and as directed. |
| 5 | M & L for PCC (1:2:4) type B-1 using 20mm graded aggreagte as in coping bed block etc complete all as specified and complete all as specified and as directed. |
| 6 | M&L PCC in surface channels,benching in sewers,drains etc type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and as directed. |
| 7 | M & L for redndering in cement mortar (1:4) 15mm thick on concrete /brick masonry wall surfaces, complete all as specified and as directed.. (Note WPC paid separetely) |
| 8 | M&L Pre-cast Reinforced Cement Concrete (1:2:4) (20mm graded aggregate) in Cover Slab of Manholes, Septic Tanks, etc., set in Cement Mortar 1:4 including demolition of existing RCC slabs ., complete all as specified and as directed.NOTE : Reinforcement will be Measured and Paid separately under appropriate Items. |
| 9 | M&L TMT Bars 10mm dia and overcut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 10 | M&L two coats of cement base paint over a coat of primer on new wall surface including preparation of surface. complete all as specified and as directed. |
| 11 | M&L preparation of old surface of wall and applying one coat of cement base paint complete all as specified and as directed. |
| 12 | Dismantling plain or corrugated asbestos sheeting any thickness in roof covering. complete all as specified and as directed. |
| 13 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.. |
| 14 | Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded complete all as specified and as directed. |
| 15 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified and as directed. |
| 16 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc. complete all as specified and as directed. |
| 17 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil. complete all as specified and as directed. |
| 18 | M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate complete all as specified and as directed. |
| 19 | M&L for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, with and incl necessary nut and bolts of 12mm dia of reqd length complete all as specified and as directed. |
| 20 | M&L, MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing Fe-410-W (Gde.E-250) quality-A orFe 290 (Gde -E-165) complete all as specified and as directed. |
| 21 | Preparing steel surfaces by mechanical cleaning/sand blasting and applying one coat zinc rich epoxy primer and two coats aliphatic two component polyurethane paint complete all as per manufacturer’s instruction and complete all as specified and as directed. |
| 22 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 23 | All as per item No above herein before but not exceeding 10cm wide or girth. complete all as specified and as directed. |
| 24 | M&L for mild steel work for securing of chain link fencing and similar small articles etc confirming to IS-15911 complete all as specified and directed. |
| 25 | S & F MS screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts and 5 to 10 CM long all as specified and directed. |
| 26 | S&F in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed. (Each line to be measured separately) |
| 27 | Dismantling fencing wire mesh, any type all directed by Engineer-In-Charge complete all as specified and as directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and as directed. |
| 29 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed. |
| 30 | M&L for RCC work (1:1.5:3) (20 mm graded stone aggregate )as in Foundations, including rafts, footings, foundation beams; plinth beams,bases for columns including demolition of existing RCC complete all as specified and as directed. |
| 31 | M&L for RCC work (1:1.5:3) (20 mm graded stone aggregate) Columns, pillars, piers, posts and struts including demolition of existing RCC complete all as specified and as directed |
| 32 | M&L Formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter flat Rough finished surfaces of concrete complete all as specified and as directed. |
| 33 | M&L Formwork to Formwork to sides of pillars,posts, struts, piers, columns and stanchions Square, Circular rectangular or polygonal Rough finished surfaces of concrete complete all as specified and as directed. |
| 34 | Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 35 | Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 36 | S&F for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to FE 410,E-250 Qualitry A including dismantling wrought or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 37 | M& L for Granite of any type 18-20MM thick cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in vertical surfaces of wall incl 10 MM thick backing coat in CM 1:4 Including Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedeed and pointed in any morter and any position. complete all as specified and as directed. |
| 38 | Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed. |
| 39 | M&L for 100 mm thick PCC (1:3:6) Type D-2 using 40mm graded stone aggregate as in subbase/footpath necessary form work, complete all as specified and as directed. |
| 40 | M&L for 75 mm thick PCC (1:3:6) Type D-2 using 40mm graded stone aggregate as in subbase/footpath/Plinth protection necessary form work, complete all as specified and as directed. |
| 41 | M&L for 50 mm thick PCC (1:3:6) Type D-2 using 20mm graded stone aggregate as in subbase/footpath necessary form work, complete all as specified and as directed. |
| 42 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and as directed. |
| 43 | M&L For pre-polished glazed designer ENDURA tiles/dura stone, coloured, 30cm x 30cm x 10cm thick , set, jointed and pointed in neat cement slurry, pointed in white or coloured cement to match in floors over 15mm thick Screed in 1:4 including dismantling of old tiles complete all as specified and as directed. |
| 44 | M&L Heavy duty Coloured Ceramic Tiles as in steps,stairs in single piece set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4) including dismantling of old heavy duty tiles, complete all as specified and as directed by Engr-in-charge |
| 45 | S&F in repair 450mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches,inclunding Concrete bed in PCC (1:3:6) packing under, & haunching against the sides of pipes after they are laid & tested complete all as specified and as directed. Please Enable Macros to View BoQ information |
