Name of Work:- Gram sabha bihada me lok nirman vibhag sadak se nahar se hokar harijan basti tak sadak nirman karya
Sl. No.
Item Description
1
Earthwork in cutting or in embankment in ordinary soil excavation pits not exceeding 1/2 meter (20\\") in depth and earth work in enbankment to be in 20cm (8\\") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5\\") lift and 30m (100') lead. the earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I. S.I.No-253 I/C Mechanical Compaction in layer by Road Roller
2
Providing , laying spreading and compacting stone Agrigates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling ,with three wheel 80-100 kn static Rollar in stage of proper grade and camber , applying and brooming stone screening /binding material to fill up the interstices of coarse aggrigates ,watring and compacting to the required density Grading -3 as per Technical Sprcification clause 405
3
Brick edgeing on both side of road with 1st class brick 8cm wide 12cm deep laid with mud morter including all as per S.I.no765
4
Providing and applying primer coat with bitumen emulsion (SS1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70--1.00 kg per sqm using mechanical means as per Technical Specification Clause 502
5
Providing and applying tack coat withEmulsion (RS1) using distributor at the rate of 0.275 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
6
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm - to 11.2 mm size of aggregates Mix Ratio 2:1 either using penetration grade bitumen or Emulsion tothe required line, grade and level to serve as wearing course on the reviously prepared base,I/C mixing in a suitable plant laying and rolling with three smooth wheeled rollar 80-100 Tonne capacity and finishing to required level as per Tech. specification clause. 508
7
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510
8
Supply and informatory M.S. sign Board size 1.2x0.90M made of 18 gauge M.S. Sheat fixed in I.S.A 40x40x5 mm frame suported in on back side by 40x5 mm flate iron on all four side along with two vertical post of 2.15 mt.frome bottom of frame of angle iron ISA40x40x5 mm with 150 mm long horizontal leg (hold fast ) at bottom braced with 40x5 mm flat iron efectrically welded and painted with one coat red oxide primer including all complite . Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
