|
| 1 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 50 m as per Technical Specification Clause 301.5 |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 50 m as per Technical Specification Clause 301.5 |
| 3 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. MORD Sr No-4.1 (a) |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.. MORD Sr No-4.8 (3a) |
| 5 | Brick masonry work (Class M-100) in 1:4 cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 |
| 6 | 12 mm thick Plastering with cement mortar (1:4), on brickwork in Foundation as per technical specification Clauses 613.4 & 1204. |
| 7 | Providing concrete for Reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C M-20 Grade MORD-11.4(IV) |
| 8 | Supplying, fitting, and placing steel reinforcement (Thermo Mechanically Treated bars of Grade Fe-500D or more) in Foundation complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 MORD-11.9 |
| 9 | Construction of un-reinforced, construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse an using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501. |
| 10 | Providing &fixing of Black Granite Stone Patiya with Brick work in 1:4 C.M with Plaster etc.Proper completion of work as per direction of Engineer-In-Charge . |
| 11 | GST 18 % Please Enable Macros to View BoQ information |
