|
| 1 | Site Clearance including labour and materials and including grass cutting and carriage of materials by Head load . of work. |
| 2 | E/W in Excavation in ordenery soil in foudation including labour and matrials and T/P with all com. Work SI No. 251 |
| 3 | C.C. Work in 1:4:8 in cement, Coarse sand and 40 mm Gauge Brick Ballast including labour and matrials , T/P with all com. Work SI No. 275 |
| 4 | R.C.C. Work in Column Footing in 1:1.5:3 in cement coarse sand and 20mm gauge including labour and matrials , T/P with all com. Work SI No.287 |
| 5 | R.C.C. Work in Column in 1:1.5:3 in cement coarse sand and 20mm gauge including labour and matrials , T/P with all com. Work SI No.289 |
| 6 | M-150 B/W in Sub Structure in 1:4 in cement and coarse sand mortar including labour and matrials , T/P with all com. Work SI No.305 |
| 7 | R.C.C. Work in Plinth Beam & Lintel Beam in 1:1.5:3 in cement coarse sand and 20mm gauge including labour and matrials , T/P with all com. Work SI No.285 |
| 8 | 20 mm thick D.P.C. in 1:2:4 ratio cement & coarse sand mortar after proper deduction (SI NO 361) |
| 9 | E/W filling in embankment with cartage soil up to 8.00 km distances etc com. |
| 10 | M-150 B/W in super structure in 1:3 in cement and coarse sand mortar including labour and matrials , T/P with all com. Work SI No.307+309 |
| 11 | RCC work for slab with cement approved coarse sand & 20mm gauge dala stone grit in the proportion of 1:1.5:3 S.I. No. 288 |
| 12 | MS work in R.C.C. work including labour and matrials , T/P with all com. Work SI No.504 |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes [DSR-10.16.3 (2023) |
| 14 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.0 mm thick with zinc coating not less than 275 gm/m².DSR 12.1.1 (2023) |
| 15 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 16 | 12mm thick Plaster work in 1:3 in cement and fine sand mortar including labour and matrials , T/P with all com. Work SI No.582 |
| 17 | 2.5 Cm Thick 1:2:4 cement concrete floor with cement, approved coarse sand & 2 cm graded dala stone without base concrete etc all comp. work. 601(a) |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.8 |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 13.46.1 |
| 20 | Mild steel or iron work of Window Grill,small size and sections such as holding down bolts, hold fast, tie roads, gratings etc. (when not included in an over all rates) wrought to required form, including of supply of steel, boalts nuts and wastage etc. and there fixing required for proper completion of work.SI No.502(C) |
| 21 | Painting & Warnishing on wood work & Iron Work with approved Paint including material T &P etc all Comp. |
| 22 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.DSR(2018) 21.10 |
| 23 | Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. DSR 9.20.1 |
| 24 | Dismenteling of Old interlocking Tiles. NS1 |
| 25 | GSB Construction of Granular sub base by providing coarse graded material spreading in uniform layrs with all Completed. |
| 26 | P/L 80 mm thick rubber moulded Zig-Zag interlocking cement concrete Paver blocks manufactured by high pressure and controlled vibration machine having plan (200mm X115mm) with minimum 5mm thick topping of O.P. Cement mixed with 25% marble powder. The Compressive Strength of Concrete paver blocks shall not be less than 30MPa & 4.5kg/Nos including cost of material,Labour T&P etc. rquired for proper completion of work as directed by Engineer-In-Charge. |
| 27 | Laying C.C. Road slab Consisting of 1:1.5:3 in cement, Coarse sand and 20 mm GaugeStone grit over prepared subgrade including labour and matrials , T/P with all com. Work SI No. 773(a) |
| 28 | S/F of Granite Sign Board including labour and materials T/P with all com. Work. Please Enable Macros to View BoQ information |
