|
| 1 | Dewatering arrangement including fixing of low head high discharge mud pump with suction of delivery pipe as required |
| 2 | Manufacturing of special and pipes made out steel plate of HR coils 8MM to 10 MM thick plate in shape and size condition I/C cost of steel plate and other electricals and mechanical material i/c submerged are welding i/c cost of transportation, loading & unloading complete pipe and special barel piece, gap piece, spigot and socket end, plain & socket clamp etc.as per site condition |
| 3 | Hire charges for diesel generator set / electric connection from electric pole for cutting, welding of MS pipe and dewatering work and lightening arrangement etc. complete |
| 4 | Charges for lighteing, berickating and traffic diverting from leackage site with safety arrangement during leackage repairing work i/c fixing of bulli, wire rop, alojan lamp, cuation board, caution flag for the traffic diversion and removing all these material after completion of work from site i/c loading, unloading & 1 Days X12 Month |
| 5 | Providing and fixing gland rope 6 mm dia as per IS 5414days 1995 make champion/turner/ equivalent |
| 6 | Providing and fixing gland rope 10 mm dia as per IS 5414- 1995 make champion/turner/ equivalent |
| 7 | Provision for making arrangement for electricity from MPEB to run welding transformer, de watering pump and grinding machine, lamp etc.complete at site. |
| 8 | Manufacturing and supply of MS valve operating key and following size of sluice volve made out by single piece as per standard and site condition |
| 9 | 150 mm dia |
| 10 | Providing & fixing of neoprence rubber sheet 3 & 6 mm as per I.S.-638-1979Make TRPL/National/Equivalent |
| 11 | Providsing & fixing of nut bolt, washer, size as per requirement aas per I.S. 1363-1992 &I.S.-4218 part - 5 -1967 make Tata/GKW/Standard/ Equivalent |
| 12 | Fabrication & Providing of extra of Extra long 3 mtr MS key as per sample made MS rod 25 mm thick & MS cap molded on the sluice valve spindle &grouting 50x50x8 mm angle clamp in the chamber wall sluice vlave open & close work at Gambhri line section |
| 13 | Providing & fixing Rubber ring |
| 14 | 80 MM dia |
| 15 | 100 MM dia |
| 16 | 150 MM dia |
| 17 | 200 MM dia |
| 18 | Supply of wooden Handle hand made for spread & axxis |
| 19 | Labour charges for shaftning of chisel, axxis & Digging rod |
| 20 | Providing and fixing spun yarn Best quality |
| 21 | Providing and fixing of lead wool containing 90 % lead as per IS-318-1981 |
| 22 | Providing & fixing pig lead 99% pure |
| 23 | Providing & applying of M-seal compound make mahindra |
| 24 | supply of SS 410 spendal rod without GM check nut for following dia S/V |
| 25 | 80 MM dia |
| 26 | 100 MM dia |
| 27 | 150 MM dia |
| 28 | 200 MM dia |
| 29 | Recasting of following dia sluice vlave GM check nut i.c recasting, finishing, machining and threading as per sample and cost of extra material complete work. |
| 30 | 80 MM dia |
| 31 | 100 MM dia |
| 32 | 150 MM dia |
| 33 | 200 MM dia |
| 34 | Repairing of folowing dia sluice valve i/c fixture check nut guide both side i/c welding, finishing, cutting clamping as per size of check nut |
| 35 | 80 MM dia |
| 36 | 100 MM dia |
| 37 | 150 MM dia |
| 38 | 200 MM dia |
| 39 | 300 MM dia |
| 40 | 400 MM dia |
| 41 | Labour charges for opening and refitting of following dia sluice valve i/c cutting of old damged nut bolt, removal of damaged gland packing, rubber packing, providing, fixing of new by fabricated parts and greasing properly cost of nut bolt over-handling the valve, transportation of material T&P testing and making with risk cover as per requirement |
| 42 | 80 MM dia |
| 43 | 100 MM dia |
| 44 | 150 MM dia |
| 45 | 200 MM dia |
| 46 | 300 MM dia |
| 47 | 400 MM dia Please Enable Macros to View BoQ information |
