Name of Work:- Road Marking, Missing Studs/Delineators and Other works on Various Roads Under M-3 Sub Division PWD Bhopal.
Sl. No.
Item Description
1
Road Marking, Missing Studs/Delineators and Other works on Various Roads Under M-3 Sub Division PWD Bhopal. Please Enable Macros to View BoQ information Bill of Quantities (BOQ) Name of work : Road Marking, Missing Studs/Delineators and Other works on Various Roads Under M-3 Sub Division PWD Bhopal. Probable Amount of contract : (Rs. in Figures) : Rs. 25.00 Lacs (Rs in words) : Rupees Time Alloved : 06 months SNo SOR Item Particulers of Item Quantity Unit Rate Amount
2
(SOR Item No. 8.23)
3
(SOR Item No. 4.2(ii))
4
(i) 100mm thick C.C. paver block of M-35 grade with approved colour, design and pattern. 250.0 Cum 837.0 209250.0 (ii) 80mm thick C.C. paver block of M-35 grade withapproved colour, design and pattern. 300.0 Cum 748.0 224400.0 (SOR I.No. 6.14)
5
(A)Concrete with plant (Drum Type) and placing (A) PCC Grade M15 75.0 Cum 3925.0 294375.0 (B) PCC Grade M20 72.0 Cum 4083.0 293976.0 (C) RCC Grade M20 70.0 Cum 4110.0 287700.0 (D) PCC Grade M25 82.0 Cum 4489.0 368098.0 (SOR Item No. 10.71(A,B,C,D)
6
(SOR I.No. 8.38)
7
Supplying and installation road delineators (road way indicators). as per MORT&H Clause 806. The structure shall be made in roll forming process having height of 800-900 mm above the ground level, width not less than 100 mm and shall extend not more than 200-300mm below the ground while being installed, buried or pressed in to the ground in confirmation with IRC:79: 2019, are as directed by the Engineer-in-Charge. The guide post with pure polyester powder coating with minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting confirming to IRC-67 and ASTMD-4956 shall be pasted on both sides complying to IRC:79:2019. The delineator should consist of minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67:2022 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI label specification. The delineator shall have grooves across the- length to make the reflective sheets vandal-proof. 80.0 Each 890.0 71200.0 (SOR I.No. 8.21) Total Rs. 2499699.0 25.00 lakh Sub Engineer Sub Divisional Officer Executive Engineer Sec. P.W.D. M-3 Sub Dn. P.W.D. New Bhopal Division Bhopal Bhopal.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
