Tender For Civil & Electrical Renovation & Modification Work Of Existing Scooter Garage To Convert Into A Part Of Canteen & Making New Two-Wheeler Parking Facility At Csir-Cgcri, Kolkata., Kolkata-West Bengal

TDR : 55480973

Tender Notice
BOQ

13 Days Left

Kolkata , West Bengal

Tender Brief : Tender For Civil & Electrical Renovation & Modification Work Of Existing Scooter Garage To Convert Into A Part Of Canteen & Making New Two-Wheeler Parking Facility At Csir-Cgcri, Kolkata.

Document Fees
₹ 1000 /-

EMD
₹ 148100.0 /-

Tender Value
₹ 74.03 Lakhs /-

Submission Date
28-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2	All kinds of soil.
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5	Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
6	Asbestos Cement sheet
7	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
8	Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
9	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
10	For thickness of tiles 10 mm to 25 mm
11	Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
12	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
13	Of area 3 sq. metres and below
14	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
15	In cement mortar
16	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
17	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
18	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
19	50mm average thickness
20	Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super- Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)
21	50mm thick in Grade M 25 with cement content not less than 330 kg per cum
22	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
23	Cement mortar 1:4 (1 cement : 4 coarse sand)
24	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
25	cement mortar 1:4 (1 cement : 4 coarse sand)
26	Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level.
27	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level
28	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
29	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
30	1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
31	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
32	1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu-ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
33	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
34	Thermo-Mechanically Treated bars of grade Fe-500D or more.
35	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
36	Thermo-Mechanically Treated bars of grade Fe-500D or more.
37	Centering and shuttering including strutting, propping etc. and removal of form for
38	Foundations, footings, bases of columns, etc. for mass concrete
39	Lintels, beams, plinth beams, girders, bressumers and cantilevers
40	Columns, Pillars, Piers, Abutments, Posts and Struts
41	Suspended floors, roofs, landings, balconies and access platform
42	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
43	40 mm thick with 20 mm nominal size stone aggregate
44	15 mm cement plaster on the rough side of single or half brick wall of mix :
45	1:6 (1 cement: 6 coarse sand)
46	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :
47	1:4 (1 cement: 4 fine sand)
48	Neat cement punning.
49	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
50	With cement mortar 1:4 (1cement: 4 coarse sand)
51	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
52	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white mixed with matching pigment, epoxy touch ups, including rubbing, curing,cement, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red
53	Area of slab over 0.50 sqm
54	Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.
55	8mm thick (mirror polished and machine cut edge). Granite stone of any colour and shade
56	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
57	Granite work
58	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
59	Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
60	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
61	Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
62	Glazed Vitrified tiles Matt/Antiskid finish of size.Size of Tile 600 x 600 mm
63	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
64	Size of Tile 600x600 mm
65	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion
66	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
67	Powder coated aluminium (minimum thickness of powder coating 50 micron)
68	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
69	Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
70	Powder coated aluminium (minimum thickness of powder coating 50 micron)
71	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
72	With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
73	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
74	125 mm
75	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
76	250x10 mm
77	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
78	Kitchen sink without drain board.610x510 mm bowl depth 200 mm
79	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
80	White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap
81	White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
82	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
83	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
84	Flexible pipe. 40mm dia
85	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
86	20 mm nominal dia Pipes
87	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work
88	20 mm nominal dia Pipes
89	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
90	20 mm nominal bore
91	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
92	15mm nominal bore
93	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
94	Rectangular shape 1500x450 mm
95	Rectangular shape 453x357 mm
96	Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
97	Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves ,racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in- charge.
98	Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.
99	200 mm
100	Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
101	Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.
102	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
103	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
104	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour all complete to acheve given shade and colour:
105	New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gms/litre.
106	Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
107	Old Works (one or more coats)
108	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
109	Two or more coats on new work
110	Finishing walls with Acrylic Smooth exterior paint of required shade :
111	New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
112	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
113	Fixed to openings /wooden frames with rawl plugs screws etc.
114	Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
115	Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
116	Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
117	Wall panelling / partition with Exterior quality Aluminium Composite Panel (ACP) of approved make and brand as per direction of Engineer - in -Charge excluding the cost of supporting frame work at any floor and any height. 4mm thick.
118	Wall panelling / partition with Interior quality Aluminium Composite Panel (ACP) of approved make and brand as per direction of Engineer - in -Charge excluding the cost of supporting frame work at any floor and any height. 4mm thick.
119	Providing and fixing Corrugated roof sheet on roof made of zinc / aluminum alloy color coated high tensile steel of 0.47 mm thick having yeild strength of 550 MPa with a profile width of 1072 mm up to any pitch and fixing with required fittings as necessary. including cutting sheets to size and shape wherever required all complete as per direction of Engg.-in-charge (excluding the cost of purlins, rafters and trusses).
120	Providing & fixing plaque made sinage of 6mm thick acrylic sheet with black background and golden coloured letter including approved border engraved on vinyle gumsheet of approved size including necessary SS screw with cap to fix the plaque in position all complete as per direction.
121	Providing & fixing plaque made sinage of 4mm thick acrylic sheet with black background and golden coloured letter including approved border engraved on vinyle gumsheet of approved size including necessary SS screw with cap to fix the plaque in position all complete as per direction.
122	Proving and fixing of Jaquar make Bib Cock Auto Closing System with Built-in Control Cock With Wall Flange all complete as per direction of Engineer-In-Charge.Product Code : PRS-CHR-043
123	Supplying and Placing of Modern Executive 4-Seater Dining Table Set.Dining Table: Size 1220mm (L) x 910mm (D) x 760mm (H), made of premium quality hard wood (mehogany) with a polished natural marble top. Elegant and durable design suitable for executive settings as approved by the Engineer-inchage.Dining Chairs: 4 Nos., armless with slide-back slope for ergonomic comfort, size 440mm (W) x 500mm (D) x 950mm (H). Frame made from solid teak wood with high-quality fabric seat cushions for enhanced comfort.Finish & Quality: All components are melamine matt finish treated with anti-termite solution, ensuring long-lasting durability and low maintenance. High-end craftsmanship with smooth finish for a modern aesthetic.
124	Supplying , transporting and placing of premium quality Cafeteria Table with premium quality Korian top finish, designed for durability, hygien and modern aesthetics. The table top shall consist of 12mm thick white Korian solid surface laminated over 18mm thick commercial grade plywood, ensuring high structural stability and resistant to moisture and deformation. The understructure shall be fabricated using SS 304 grade stainless steel square section (50mm x 50mm ) and finished to ensure long lasting strength and corrosion resistance.Legs shall have anti-slip or caps to prevent floor scartches & slipping. All components must be disgned for heavy duty commercial use: smooth, seamless finish for a clean & modern look, easy to clean surfaces with high resitance to stains, heat and impact. All complete as per Direction of Engineer-In-Charge.
125	4 seater: Dimension: 1220mm (W) x 762mm (D) x 762mm (H)
126	6 seater: Dimension: 1800mm (W) x 762mm (D) x 762mm (H)
127	Supplying & placing of modern armless Cafeteria chair suitable for indoor and semi-outdoor: seat & backrest are made of high quality Virgin plastic polymer as approved colour and 4nos Leg are made of stainless steel (SS-202). Legs shall have anti-slip or caps to prevent floor scartches & slipping. Chair surface shall be free from sharp edges, burrs, or defects, uniform color and gloss on all plastic parts, complies with standard commercial seating load-bearing capacity, virgin ploymer used shall be non-toxic and UV-stabilized for color retention. All complete as per direction of Engineer-In-Charge. Dimension: 80H x 58W x 44D cm.
128	Supplying & placing of modern armless Cafeteria round chair suitable for indoor and semi-outdoor: seat: diameter of seat 16\\", made of wooden top & high quality PU coated. Legs & backrest: made of high quality stainless steel (SS-304 grade), legs are made of 3/4' 18 swg round SS pipe, bcak should be slightly slope for better comfortable. Chair surface shall be free from sharp edges, burrs, or defects, uniform color and gloss on all parts, complies with standard commercial seating load-bearing capacity, PU coat shall be high quality, durable, non-toxic and UV-stabilized for color retention. All complete as per direction of Engineer-In-Charge. Size of chair: 18'' x 16\\" x 42\\".
129	Supply, fabrication, and installation of 'U' shape semi modular storage cabinetry as per sketch attached comprising base and overhead units, constructed from BWR grade plywood (20mm thick), finished externally and internally as specified, including necessary hardware and accessories.1.Semi modular Base Cabinet (Below Granite Slab): common depth 600mm ,lenght & width of each cabinet as per sketch ('U' shape)Material: 18mm thick BWR/BWP plywood for carcass, vertical partitions, and 20 mm shutters.External: Laminate , Internal: Laminate / white melamine.Shutter Type: Swing/openable or drawer front, as per design.Hardware: Best quality Soft-close hinges (Hettich/Blum/Equiv.)SS telescopic/soft-close drawer channels (for drawers, if any)SS handles/push-to-open system2. Overhead Cabinet full modular : Common depth 300mm lenght & width of each cabinet as per sketch (Below G.top of wall A,wall B,wall C)Finish:External: Laminate Internal: Laminate .Shutter Type: hinged (as per image).Hardware:Soft-close lift-up hinges or flap fittings (Häfele/Blum/Equiv SS handles Mounting: Concealed wall-hanging brackets anchored to RCC/block wall with approved fasteners.Top Clearance: 600mm (typical) above countertop unless otherwise shown in drawing.
130	Supplying and placing Stainless Steel (SS-304) Marvel Top Table with 2 Bottom Shelves, overall size 60\\" (L) x 24\\" (W) x 34\\" (H). The table top shall consist of a polished granite slab fixed over a backing of SS 304 grade sheet, 18 SWG (approx. 1.2 mm thick). Two bottom shelves shall be fabricated from approved make SS 304 grade sheet, 20 SWG (approx. 1.0 mm thick). A structural frame of SS angle 30x30x3 mm shall be provided below the top for support. The table shall have four vertical legs made from 38 mm diameter SS 304 grade round pipes, 16 SWG (approx. 1.5 mm thick), each mounted on adjustable nylon bullet feet for leveling. All complete as per the direction of the Engineer-in-Charge.
131	Supplying and placing Stainless Steel (SS-304) Side Table with 2 Bottom Shelves, suitable for Hood Type Dish Washer. Overall size 30\\" (L) x 30\\" (W) x 34\\" (H). The top shall be fabricated from SS 304 grade, 18 SWG (approx. 1.2 mm thick) sheet. The bottom shelves shall be made from approved make SS 304 grade, 20 SWG (approx. 1.0 mm thick) sheet. A supporting structure of SS angle 30x30x3 mm shall be provided below the top. Vertical legs shall be made from SS 304 grade round pipe of 38 mm diameter, 16 SWG (approx. 1.5 mm thick), mounted on adjustable nylon bullet feet and burr-free edges, polished finish as directed.
132	Supplying and placing Stainless Steel (SS-304) storage rack with 4 perforated shelves, overall size 45\\" (L) x 18\\" (W) x 60\\" (H). Shelves shall be fabricated from approved make SS-304 grade, 18 SWG (approx. 1.2 mm) thick perforated sheet. The rack shall have 4 vertical legs made of 38 mm diameter SS-304 round pipes, 16 SWG (approx. 1.6 mm thick), mounted on adjustable nylon bullet feet for stability and leveling Smooth, burr-free edges, polished finish as directed.
133	Supplying and placing kitchen floor drain cover (perforated), 200mm wide, fabricated from approved make stainless steel SS 304 grade. The cover shall be made using 18mm dia pipe and 16-gauge (approx. 1.6 mm) thick SS sheet, Smooth, burr-free edges, polished finish as directed. The item includes all necessary cutting, welding, finishing, and installation work complete as per the direction of the Engineer-in-Charge.
134	Supplying and fixing of SS Heavy Duty storage wardrobe with shutter.Size: 4 feet(W) x 2 feet(D) x 2.5 feet(H).Specification: Top & bottom Made with Jindal 16 Swg Sheet 304 Grade. shelves or vertical sheet or backing sheet or shutter made with Jindal 20 Swg Sheet 304 Grade. Shutter shall be double leaf & fixed with high quality soft closing closing hinges and handle or push to open system. Vertical leg Made with 16 Swg 304 Grade 1.5 mm Thickness , Dia 38mm, Round Pipes Mounted on Adjustable Nylon Bullet Feets. Provide Slide out Drip Tray Below Burner Setup. All complete as per direction of engineer In-Charge.
135	Providing & fixing Roller blinds (single/double) with approved fabric (Blackout/Sunscreen/Light filtering) combination of PVC and polyester and approved colour with mount and roll mechanism (inside/outside and back/front) with chain drive dropped not less than 500 mm with side control (Left/Right) and spring assist for smooth operation including neccessary anodized/powder coated aluminium member for top of required size and bottom roller (not less than 38 mm dia) member. All complete as per direction.
136	Single Brick Flat Soling of picked jhama bricks including ramming anddressing bed to proper level and filling joints with local sand.
137	Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. Slab Thickness 20 to 25 mm
138	Supplying, fitting and fixing of false ceiling framework with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. all complete as per drawing & directions of Engineer-in-charge.
139	Supplying fitting & fixing concealed False ceiling Framework with G.I. Section (perimeter channels having one flange of 20 mm. and another flange of 30 mm. with thickness of 0.55 mm. and web of length 27 mm., along the perimeter of the ceiling, screws fixed to the wall with help of nylon sleeves or PVC dash fastners @ 610 mm c/c. then suspend G.I. intermidiate 'C' section with web 90 mm. and flanges of 15 mm. each from soffit @ 1200 mm c/c with ceiling angle of size 25 mm. X 10 mm. X 0.55 mm. fixed to soffit G.I. Cleat and Steel expansion fasteners. Ceiling section of 0.55 mm. thickness having web of 51.5 mm. and two flanges of 26 mm. each with lips of 10.55 mm., are then fixed on to the intermediate channel with the help of connecting clips in the direction perpendicular to the intermidiate channel @ 610 mm c/c) with fully threaded fiber cement screws @ 300 mm c/c. all complete as per the drawing and direction of Engineer-in-Charge. Section specification :- Perimeter Channel :- 30 mm X 20 mm X 27 mm, thickness 0.55 mm (min), Intermidiate Channel :- 15 mm X 90 mm, thickness 0.90 mm (min), Ceiling Section :- 51.5 mm X 26 mm X 10.55 mm, thickness 0.55 mm (min), Ceiling Angle :- 25 mm X 10 mm, thickness 0.55 mm (min).
140	Concealed false ceiling work: Supplying ,fitting & fixing Eco-friendly, Water Resistance and Incombustable Calcium Silicate board/tiles (Density >900 Kg per Cu.m.) of approved design and brand finished with calcium silicate jointing compound to form a joint less false ceiling all complete as per drawing & direction of Engineer - in- Charge. False ceiling with 6mm thick square edged Calcium Silicate Board.
141	Scraping and removing greasy soot from walls or ceiling of kitchen or similar smoke affected rooms and preparing the surface.
142	Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
143	Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface.(Cement-69 Kg/100 m)
144	Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including mending good damages and finishing the surface to match with adjacent areas complete as per direction.With plain cement concrete blocks(1:1½:3) with stone chips.Block size 250 x 125 x 150 mm.(Cement-2.5 Kg/No.).
145	Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Pakur variety. (SAIL/TATA/RINL)
146	Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.
147	Single Socketed 3 Meter Length. 160 mm.
148	Fittings.Plain Tee- 160mm
149	Fittings. Bend 87.5º- 160mm
150	Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.
151	Godrej Hydraulic door closer fitted and fixed complete. Heavy type
152	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing recessed steel/ PVC conduit as required.
153	3 x 1.5 sq. mm
154	3 x 2.5 sq. mm
155	4 x 2.5 sq. mm
156	2 x 4.0 sq. mm (Green colour)
157	3x 4.0 sq.mm
158	6 x 6 sq. mm
159	Supplying and drawing following pair 0.5 sq mm FRLSPVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
160	2 Pair
161	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
162	20 mm
163	25 mm
164	32 mm
165	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
166	Supply and erection, testing and commissioning of Modular push type AC Starter of 25A rating with GI box /PVC box (for surface use), Coverplate and Grid plate complete in all respect as per the direction of the Engineer-In charge.
167	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
168	5/6 amps switch
169	15/16 amp switch
170	3 pin 5/6 amp socket outlet
171	6 pin 15/16 amp socket outlet
172	Telephone socket outlet
173	Bell push
174	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
175	1 or 2 Module (75mmX75mm)
176	3 Module (100mmX75mm)
177	6 Module (200mmX75mm)
178	12 Module (200mmX150mm)
179	Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
180	Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required.
181	1 run of cable
182	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
183	6 way Double Door
184	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
185	8 way (4 + 24), Double door
186	12 way (4 + 36), Double door
187	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete connections, testing and commissioning etc. as required.
188	Single pole
189	Double pole
190	Triple pole
191	Triple pole and neutral
192	Supplying and fixing following rating, 415 volts, \\"C\\" curve, 10KA breaking capacity, FP miniature circuit breaker confirming IS/IEC 60898-1 2002, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. complete in all respect as per the direction of the Engineer-In charge.
193	63 Amp Four pole
194	Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
195	Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
196	125 A, 36 KA,FPMCCB
197	200 A, 36 KA,FPMCCB
198	Providing and fixing Sheet steel duly powder coated metal Four pole MCB enclosure confirming IEC 61439-3 complete in all respect as per the direction of the Engineer-In charge.
199	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
200	Upto 35 sq. mm (clamped with 1mm thick saddle)
201	Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
202	4 X 16 sq. mm (28mm)
203	3½ X 120 sq. mm (45mm)
204	4X 50 sq.mm (35 mm)
205	Finishing of end termination with proper size of pin / ring type copper solderless socket by crimping method of following sizes PVC insulated copper conductor complete in all respect as per the direction of the Engineer-In charge.
206	1 x 2.5 sq. mm
207	1 x 4 sq. mm
208	1 x 16 sq. mm
209	1 x 25 sq.mm
210	1 x 35 sq.mm
211	Supply of the following Items make as per attached sheet:-
212	RJ 45 I/O socket (UTP) with shutter on existing modular base confirming ISO/IEC:11801-22.
213	Supply of 1.1 KV grade following PVC insulated Armoured cable confirming the IS 7098 (Part 1) 1988 specification:-
214	4 Core 16 sq.mm. copper cable
215	4 Core 50 sq.mm. copper cable
216	Supply and fixing of wall mounted oscillating type cabin fan having 1300-1400 RPM, 400 mm Blade sweep & minimum of 3000cfm air-flow including connection of the same, complete in all respect as per the direction of the Engineer-In charge.
217	Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply earthing etc. complete as required.
218	1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
219	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
220	Supply, testing & commissioning of Single phase industrial type metal body (IP55) heavy duty exhaust fan having 450mm blade sweep & 1400 RPM complete in all respect as per the direction of the Engineer-In charge.
221	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
222	Upto 450 mm sweep
223	LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round /square/ Rectangular) COB Type of following bodymaterial and construction as per IS : 10322 withdriver as per the requirement with Driver efficiency>85%, Operating voltage AC 140-270 Volt,frequency 50/60 hz, Operating temp range -5 0Cto 40 0C, internal surge protection of 2.5 KVwith Short & Open circuit protection ,THD < 10% ,P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. \\"complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector.
224	18 watt
225	LED Batten light (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range-5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours 47 DELHI SCHEDULE OF RATES (E&M)-2025 with 70% of initial Lumen maintained till lifeends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Testreport and all testing required for LED fixturesas per BIS shall be submitted.. Shape size andCCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminiumBody (Thickness > 1.20 mm)
226	24-26 watt
227	Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R- 407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).
228	2.0 TR with 5 Star BEE Rating
229	Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
230	12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm
231	15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm
232	Supplying and laying of rigid PVC condensate drain piping complete with fitting accessories in concealed / surface fashion including mending good damages to the original finish complete in all respect as per the direction of the Engineer-In charge.
233	Supply & Laying PVC insulated unarmoured flexible Copper cable confirming IS 7098 (part-I) 1988, between indoor and out door unit in surface / recess fashion as per site requirement complete in all respect as per the direction of the Engineer-In charge.
234	4Cx2.5 sqmm
235	Supply, installation, testing and commissioning of Water Purifier cum cooler with 80 litre storage tank, Stainless steel body, a minimum of 60LPH cooling capacity & 80LPH purification capacity having minimum 4-stage purification process i.e sediment filter,carbon block, UV chamber and zinc booster.This machine should have 2 nos faucet (one for ambient & another for cold water), complete in all respect as per the direction of the Engineer-In charge.
236	Supply Installation testing & commissioning of 1860 X 2100 sq.mm Automatic Sensor glass(12 mm toughen) door Operator( including Photo beam sensor,motion sensor, motor 24v dc, channel alluminium, controller,clamp other accessories ).This job includes whole making,joice fitting (if any), and all other work related to the installation of the door required at site complete in all respect as per the direction of Engineer in-charge.
237	Supply,installation testing commissioning of Single channel digital Timer of following specification for operation of AC machines as and when required.
238	1 output 16 A - 250 VA- 50/60 Hz56 programmes 1 Channel
239	Supply,installation testing commissioning of 230V/415V electrical contactor conforming IS / IEC 60947-4-1 & IEC 60947-4-1.
240	40 Amp. (4pole -single /Three phase)
241	Supply,installation testing commissioning of Air Curtain (Stainless steel body) of 6 feet in size & having the capacity of 21 m/s air throw with Sensor & contactor combination for auto on/off feature at the back side a sensor door complete in all respect as per the direction of the Engineer-In charge.
242	Supply,installation testing commissioning of Stainless steel body industrial type Kitchen Chimney (SS 202 Hood with SS202 Body) of size 12ft X 4 ft with a minimum 2800 CFM suction capacity ,3-phase 1 H.P 1440 RPM motor, Axial flow fan, with atleast 6 nos baffle filters of size 14'' X 18'' each,(note-any space in the hood not occupied by a filter will be blanked off with sheet metal) GI ducting for hot air ventilation (minimum 25 ft), complete in all respect as per the direction of the Engineer-In charge.
243	Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
244	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
245	Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
246	Supplying Installation Testing and Commissioning of4MP IP IR Dome Camera having followingspecifications and features etc :-1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB,Camera should display Camera title, Date &Time in live & recorded video2)Image Sensor: 1/2.8\\" or better progressive Scan CMOS to get color image eve at nightcondition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control, White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum): Video:- H.265 or better,Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more)5) Digital Noise Reduction:- DNR (3D) On/Off6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps, Sub streams minimum: 720P@25/30 fps7) Image Setting: Rotate Mode, saturation, brightness,contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection8) Cyber Security: AES 256-bit Encryption,Configuration encryption, trusted execution, Digest,security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-inMicro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device,11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP,NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE,NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS,unicast,13) System Capability: ONVIF, Camera shall supportopen source VMS14) Ethernet: 1 RJ 45 10/100 Ethernet port15) Audio : It should support 1 x Built-In Mic and 1/1Alarm In/ Out for External Mic. and Speakers as persite requirement.16) Power Input: The camera should supportsimultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source.17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body19) Operating Condition:- Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-condensing)20) IR life: 40000 hours or higher21) Video Bit rate: 32 KBPS - 8 MBPS or better22) Standards: BIS with ER, STQC Certified, CE, FCCand RoHS
247	4MP @ 25/30fps@1440P (2560 x 1440) DomeCamera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site requirement).
248	Supply and fixing of 75 mm X 75 mm X 50 mm PVC box at different locations of canteen.
249	Supply, testing & commissioning of Heavy duty,energy efficient, Metal Blade (450mm blade sweep) Pedestal fan having CMM>105 & a minimum of 2000 RPM with 3 nos metal blades complete in all respect as per the direction of the Engineer-In charge.
250	Supply & fixing of sheet steel body duly Powder coated MCCB enclosure to provide the housing of 200A MCCB cofirming IEC 61439-3 complete in all respect as per the direction of the Engineer-In charge.
251	Excavation for cable trenches in soft soil, depth upto1.2m including dressing of sides lift upto 1.5 m,including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
252	Supply, testing & commissioning of 3Phase 415V DoL starter having range of 9-15A with metal enclosure confirming IP54 protection complete in all respect as per the direction of the Engineer-In charge.
253	Extra for fixing the louvers/ shutters complete withframe for a exhaust fan of all sizes. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents
10	Click here to download tender document	Tender Documents
11	Click here to download tender document	Tender Documents
12	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Civil & Electrical Renovation & Modification Work Of Existing Scooter Garage To Convert Into A Part Of Canteen & Making New Two-Wheeler Parking Facility At Csir-Cgcri, Kolkata., Kolkata-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Civil & Electrical Renovation & Modification Work Of Existing Scooter Garage To Convert Into A Part Of Canteen & Making New Two-Wheeler Parking Facility At Csir-Cgcri, Kolkata., Kolkata-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us