|
| 1 | Demolition Cement Concrete (unreinforced)in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 2 | Rough excavation Hard/dence soil soil-not exceeding 1.5 m deep and getting out. |
| 3 | M/L,Hardcore of broken brick gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 4 | M/L, Cement concrete Type D2 1:4:8 (40 mm graded aggregate)in foundations, filling and mass concrete. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 6 | Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 7 | M/L, Brickwork with subclass ‘B’ bricks, straight orcurved on plan exc 6m mean radius built in 1:4 cement mortar. |
| 8 | M/L, Cast iron pipes Bore 100 mm with spigot and socket ends, vertically cast, class B, in any length, laid in trenches.Jindal/Tata. |
| 9 | S&F, Tubes, 'medium grade' 50 mm dia galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors. Make-Jindal/Tata. |
| 10 | M&L, Run lead joint, 100 mm dia pipe |
| 11 | M & L, Up to 150 mm ,Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. |
| 12 | M/L, Sluice Valve 100 mm dia Class PN 1.6. |
| 13 | M/L, Gate Valve 50 mm dia . |
| 14 | S&F, Tubes, 'medium grade' 25 mm dia galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors. Jindal/Tata. |
| 15 | S&F, Tubes, 'medium grade' 20 mm dia galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors. Jindal/Tata. |
| 16 | S/F Gun-metal, globe or gate valves,20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed. |
| 17 | M&L, Cement concrete Type B1, 1:2:4 (20 mm graded aggregate) 55 mm thick in floore, Finishing cement concrete surface even and smooth using extra cement. |
| 18 | S/F, Ball valves 15 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms, fixed in repair. |
| 19 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 20 | M/L Rendering 15 mm thick 1:4 cement plaster finished even and smooth w/o using extra cement with cement slurry @3.00 kg of per sqm. |
| 21 | M/L, Neeru finish to plastering as specified. |
| 22 | Taking down and refixing old steel tubing and connection old and new psition 20mm dia. |
| 23 | Removing building materials to a distance of 05 km or under, including loading, unloading and stacking at the destination. Please Enable Macros to View BoQ information |
