|
| 1 | Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 2 | M&L for ceramic exterior wall tiles, 7.5 - 9 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,conforming to IS 15622, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises, complete all as specified and as directed. |
| 3 | M&L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded stone aggregate) as in floor, sub-base, plinth, complete all as specified & as directed. |
| 4 | M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work, complete all as specified and as directed. |
| 5 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing dressed stonework and precast concrete surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Demolition of reinforced cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided to , complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:4, complete all as specified and as directed. |
| 8 | M&L for Reinforced cement concrete (nominal mix) in Type B0 1:2:4 (12.5mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Taking down cement plaster on brick walls, built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without extra cement, complete all as specified and as directed. |
| 11 | Providing and mixing a powder-form integral waterproofing admixture into the concrete mix at a recommended dosage (typically 0.8% to 1.0% by weight of cementitious content). The admixture shall react with moisture and unhydrated cement particles to form non-soluble crystals throughout the pores and capillary tracks, effectively sealing the concrete against water penetration from any direction , complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for Complete removal of existing treatment on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for cleaning of existing exposed rusted reinforcement on walls/ceilings/ Chajjas (for building upto two storey) with wire/rotary wire brush,making surfaces free from loose materials,dirt etc and applying two coats of rust removal compound as per manufacturer's instructions, complete all as specified and as directed by Engineer-in-Charge. |
| 17 | M&L for rendering 25 mm thick plaster on ceiling/ walls /Chajjas (for building upto two storey) of old brickwork or concrete surface with structural grade repair mortar over a coat of epoxy based bonding agent, complete all as specified and as directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
