|
| 1 | Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6), complete all as specified and directed |
| 3 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350 x 250mm x 7mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface, complete all as specified and directed |
| 4 | M&L for Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand laid over and including 10mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 5 | M&L for Virified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick backing coat in CM 1:3 to recieve tiles complete all as specified and directed. |
| 6 | Demolition of cement oncrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed |
| 7 | M&L for 75mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in plinth protection, complete all as specified and directed |
| 8 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 9 | M&L for green marble 18-20 mm thick as in (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking plateform and like set in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match and set with neat cement slurry laid over and including 20mm thick screed / backing coat in CM 1:3, complete all as specified and as directed. |
| 10 | M&L for Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and including 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 11 | M&L for machine cut kota stone slab 20-25 mm thick as in vertical surfaces such as riser of steps, skirting, dado and pillar etc., laid over and including 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pinted with cement and pigment to match the shade of the slab incl rubbing and polishing etc., complete all as specified and as directed. |
| 12 | M&L for granite (of any type) tiles 20mm thick as in floors and similar works laid over and including 20mm thick cement mortar screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone including rubbing, cutting & polishing etc. complete all as specified and directed |
| 13 | M&L for granite (of any type) tiles 20mm thick as in skirting / dado and similar works laid over and including 10mm thick screed / backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match including cutting, rubbing & polishing complete all as specified and directed |
| 14 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each, complete all as specified and directed |
| 15 | All as per item No. 14 above but exc. 1.50 Sqm and n.exc. 4 Sqm. |
| 16 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening, complete all as specified and directed |
| 17 | S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, complete all as directed by Engr-in-Charge |
| 18 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, star lock, rubber beading all complete as per architectural drawings, complete all as directed by Engr-in-Charge |
| 19 | S&F in repairs aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick) around the opening, complete all as directed by Engr-in-Charge |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required size and length complete all as directed by Engr-in-Charge |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as directed by Engr-in-Charge.Note:- M.S. hold fast / lugs or SS dash fasteners shall be paid for separately. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as directed by Engr-in-Charge.Note:- M.S. hold fast / lugs or SS dash fasteners shall be paid for separately. |
| 23 | M&L 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints, complete all as specified and directed |
| 24 | S&F 200mm long and 10-15mm dia MS fasteners complete all as specified and directed |
| 25 | S&F 35mm thick plain, framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile shall be as per IS : 1003 (Part-1), kiln in seasoned and chemically pressure treated, complete all as specified and directed |
| 26 | S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered orrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-I section 8 clause 8.24(a), complete all as specified and directed |
| 27 | S&F in repaies, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 20mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 28 | S&F in repaies, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 12mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as directed by Engr-in-Charge.Note:- M.S. hold fast / lugs or SS dash fasteners shall be paid for separately. |
| 29 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and shown in drawings SSR Part-I complete all as directed by Engr-in-Charge. |
| 30 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and shown in drawing etc complete all as specified and directed |
| 31 | S&F of MS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed |
| 32 | S&F in repairs MS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed |
| 33 | S&F of 100 mm long, butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed |
| 34 | S&F in repairs 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed |
| 35 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 36 | S&F in repairs 125 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 37 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 38 | S&F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed |
| 39 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed |
| 40 | S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed |
| 41 | S&F 150mm long aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 42 | S&F in repairs 150mm long aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 43 | S&F 200mm long aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 44 | S&F in repairs 200mm long aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed |
| 45 | M&L for preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed |
| 46 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed |
| 47 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed |
| 48 | S&F rim latch with 2 levers, of brass body, polished bright, stove enamelled finish; with brass knob or lever handle etc complete all as specified and directed. |
| 49 | S&F aluminium louvers with levers and locking arrangements suitable for fixing 100mm wide 4 to 6 nos frosted glass complete all as specified and directed |
| 50 | S&F in repairs star lock for window including all necessary fittings complete all as specified and as directed. |
| 51 | S&F in repairs aluminium windows bearing of required size of windows (including taking down window and re-fixing the same position) complete all as specified and as directed. |
| 52 | Hacking out old broken glass (any thickness, size, quality or description) from any frame surrounds, glazed with putty or fixed with beads, complete all as specified and directed |
| 53 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n. exc. 0.50 Sqm each, complete all as specified and directed |
| 54 | S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc. 0.50 Sqm each, complete all as specified and directed |
| 55 | S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified and directed |
| 56 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed |
| 57 | M & L for 5 mm thick ready mixed cement base plaster on concrete surfaces of ceilling, finish the surfaces even and smooth, complete all as specified and directed. |
| 58 | M & L for 10mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces, finish the surfaces even and smooth, complete all as specified and directed. |
| 59 | M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed. |
| 60 | M & L for preparation of newly or untreated plastered surface applying two coats of oil bound distemper (OBD) over a coat primer complete all as specified and directed. |
| 61 | Taking up or down 15mm dia CPVC/GI tubing and connection including, cleaning for re-fixing or removal to store complete all as specified and directed |
| 62 | Taking up or down 20mm dia CPVC/GI tubing and connection including, cleaning for re-fixing or removal to store complete all as specified and directed |
| 63 | Taking up or down 25mm dia CPVC/GI tubing and connection including, cleaning for re-fixing or removal to store complete all as specified and directed |
| 64 | S&F galvanized steel tubing 15mm bore medium grade, including with fittings and fixtures, fixed to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge. |
| 65 | S&F galvanized steel tubing 20mm bore medium grade, including with fittings and fixtures, fixed to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge. |
| 66 | Supplying and fixing of 25mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 including with all fittings, fixed to walls with hooks, ceiling or laid on floor complete all as specified and directed by Engineer in Charge. |
| 67 | S&F in repairs, 10litre capacity PVC flushing tank, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, PVC flush pipe, float and handle including brackets and waste pipe complete all as specified and directed |
| 68 | S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed |
| 69 | S&F in repair vitreous China squatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed |
| 70 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 71 | S&F in repair stainless steel chromium plated toilet paper holder including fixing arrangement complete all as specified and directed. |
| 72 | S&F in repair stainless steel chromium plated soap dish including fixing arrangement complete all as specified and directed . |
| 73 | M&L for petty repairs with plain cement concrete type B1 (using 20mm graded stone aggregate), 1:2:4 to floor, column, beam, window cill, door cill, balcony rep etc area n. exc. 2 sqm of any height of building with and including using necessary scaffolding & security measures including matching of reapired part to existing surfaces complete all as specified and directed |
| 74 | M&L for petty repair with cement plaster in CM 1:4 to wall, ceiling , column, beam, window cill, door cill, balcony rep etc area n. exc. 2 Sqm of any height of building with and including using necessary scaffolding & security measures including matching of reapired part to existing surfaces complete all as specified and directed |
| 75 | M&L for petty repair to alginment for aluminium section / wooden of windows/ joinery doors including with all necessary fittings as required at site such as hook & eye, hinges, tower bolts, siliding door bolt, rollers required for sliding repairs, handles including silicon gun paste around windows screws resecuring or easing & adjusting aluminium door / window shutter such as tightening / provn of fasterners, hinges, rubber gasket, rubber beading, bottom bearing (like roller of window / door, butt hinges, handle, tower bolt, bottom bearing, rubber beading, bow handle etc complete) and clips etc including taking and refixing the same position, complete all as specified and as directed |
| 76 | M&L for petty repair to wooden door, PVC door, cupboard door, wardrobe door with shutter (size not more than 2 Sqm) including roller, windows, etc with minor repair and easying and adjustment / aligment to openable with assessories if requred any ( like roller of cupboard door, butt hinge, handle, tower bolt, beading, bow handle, etc complete) complete all as directed by Engr-in-Charge. |
| 77 | M&L for petty repairs to prevent leakage from bib taps, pillar cock stop cock, PVC connection, waste pipes, float valves, angle valve, concealed valve, GI union joints of GI pipe re-fixing of bottle trap etc by changing of PVC washers / sheet washers, spindle or any other minor accessories etc including taking down and re-fixing the same position, complete all as specified and directed Note:- Attending one complaint and make it functional shall be measured as one Job for payment purpose. |
| 78 | M&L for petty repair to high or low level flushing cistern by adjusting of leaking float valve, PVC connection, PVC bend including replacement of rubber washer check nuts plunger etc suitable for any type of flushing cistern including taking and refixing of same position, complete all as specified directed |
| 79 | M&L for petty repair to wall mixer, basin mixer, sink mixer etc by replacing of spindle, rubber washer etc. including taking down and refixing of the same position, complete all as directed by Engr-in-Charge |
| 80 | M&L for petty repair to internal water / external inlet water GI pipe line n. exc. 1.0 Rm of any type with and including socket, elbow, nipple if any required at site with repair to water blockage, pipe line leakage (arreat the leakage including all fitting) including concealed water tubing etc. at any height of building by using necessary scaffolding and other security measures including taking and re-fixing of the same position, complete all as directed by Engr-in-Charge |
| 81 | M&L for petty repair to renewing of glazed or ceramic tiles as in patches area not exceeding 1.0 Sqm each including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as directed by Engr-in-Charge |
| 82 | M&L for petty repair to toilet floor seepage n. exc. 2.0 Sqm including sunken portion treatment with water proofing compound including repair to leakage from floor trap, nahani trap, grating etc complete all as directed by Engr-in-Charge |
| 83 | M&L for petty repair to leakage from rain water pipe, length n. exc. 2.0 Rm, leakage from vertical sewage CI /PVC pipe, including replacement of elbow, Socket, Bend with water sealent compound etc. of any height of building by using necessary scaffolding and security measures etc. complete all as directed by Engr-in-Charge |
| 84 | M&L for petty repairs to fixing only of bib taps, pillar cock stop cock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by and any other minor accessories etc. complete all as directed by Engr-in-Charge |
| 85 | M&L for petty repair to any type & any size of balcony grill of any height including hand rail with cover of PVC including welding, dismentling, fixing in cement concrete in 1:2:4 and matching to existing surfaces complete by using 16/20 mm square / round bar including painting etc. complete all as directed by Engr-in-Charge |
| 86 | M&L in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified by Engr-in-charge |
| 87 | S&F in repair PTMT cabinet with mirror of size 600x450x124mm complete all as specified & directed. |
| 88 | S&F in repair Aluminium anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges with brackets, complete all as specified and directed |
| 89 | S&F in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer in Charge. |
| 90 | S&F of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding, waste fitting, waste pipe in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm fixed in repair complete all as specified and directed |
| 91 | S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 92 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified |
| 93 | S&F in repair Brass Chromium plated wall /WHB / sink mixer suitable for mixing of hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed . |
| 94 | S&F in repair 15mm bore stop valve cast copper alloy with handle screwed both ends for GI outlet / inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed |
| 95 | S&F in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for GI outlet / inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge. |
| 96 | S&F in repair 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge. |
| 97 | S&F in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified & directed. |
| 98 | S&F in repair waste coupling 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 99 | S&F in repair waste coupling 40mm size, brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed |
| 100 | S&F in repair PVC connections 15 mm size with brass nuts both side of length 450 mm complete all as specified and directed . |
| 101 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and directed |
| 102 | S & F in repair PVC waste pipe 32 to 40mm size, suitable for WHB / Sink up to floor trap and fixed complete all as specified and directed |
| 103 | S & F in repairs brass chromium plated overhead shower 150 mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed . |
| 104 | S&F in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified . |
| 105 | S&F in repair 25 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified . |
| 106 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer in Charge. |
| 107 | S&F in repair brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden / plastic beads complete all as specified and directed |
| 108 | Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets, complete all as specified and directed |
| 109 | S&F Anodised alunimun of 605x605mm size snap grid frame work for false ceiling complete all as specified and directed |
| 110 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed |
| 111 | S&F 10mm thick without relevant PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made from aluminium / G.I. / M.S. complete all as specified and directed. |
| 112 | S&F in repair 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and including with all necessary fittings, tower bolt, handle, knob, magnet, fixed to timber frame work etc. complete all as specified and directed |
| 113 | S&F in repair 18/19mm thick Pre-laminated particle board, exterior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and including with all necessary fittings, tower bolt, handle, knob, magnet, fixed to timber frame work complete all as specified and directed |
| 114 | S &F in repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 115 | S&F in repair mild steel, chromium plated cutrain rails (Medium weight) with and including fixing brackets, stops, rollers etc. complete all as specified and as directed . |
| 116 | S&F in repair two-in-one tap, cast copper alloy, chromium plated fancy type with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed |
| 117 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed |
| 118 | S & F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws etc. complete all as specified and directed |
| 119 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc. complete all as specified and directed |
| 120 | Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning complete all as specified and directed |
| 121 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls, complete all as specified and directed |
| 122 | S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed |
| 123 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius, complete all as specified and directed |
| 124 | S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius, complete all as specified and directed |
| 125 | S&F 110mm bore PVC (SWR) cowl any radius, complete all as specified and directed |
| 126 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls, complete all as specified and directed |
| 127 | S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed |
| 128 | S&F grating square / rectangular 150mm size of PTMT (Minimum weight 100gms) complete all as specified . |
| 129 | Supply and fixing in repair of 04 pieces pulley operated cloths drying system of approved make, consisting of aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pully made up of devil mounted and fixed with selg tapping screw. Rope will be HDPE doble core of 4 mm with rope Guide at locking system to hiderope Channel to be dia of minium weight of pipe shall bot be less than 0.20 kg / Rm and maximum weight of pipe in one unit not less than 2 kg weight of rope shall be not less than the 550 gms/ meter including taking down of old unserviceable cloth hanger complete all as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
