|
| 1 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for including removal of all demolished material to out side MoD complete all as specified and as directed. |
| 2 | M&L for Reinforced Cement Concrete Grade M-30(design mix) using (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 3 | Use and Waste Formwork of Square, Rectangular or Polygonal to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specified and as directed. |
| 4 | M&L for Reinforced Cement Concrete Grade M-30 (design mix) using (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, coping, lintels over 1.5m span complete all as specified and as directed |
| 5 | M&L for angles and flats for post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling,bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 complete all as specified and as directed. |
| 6 | Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 7 | M&L for Precast Cement Concrete solid block masonry exc 10 cm in width with minimum compressive strength of 50kg/sqcm using PCC (1:3:6) type C-1(using 20mm graded aggregate) set in CM (1:6) all as specified and as directed |
| 8 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:4) complete all as specified and as directed. |
| 9 | M&L for Preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 10 | S&F for Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or typing at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified as directed. |
| 11 | M&L Concertina coil fencing with punched tape concerntina coil made form high tensile spring steel, high Carbon wire conforming to is -4454 [part-1], of Grade -SM duly hot Dipped Galvanished as per IS -4826 with 230GSM, 600mm dia, 10 Metre openable lenghth, with galvanished coating and punched tape material as per IS-513, having 50 Nos rounds per 6 mtr lenghth (before streaching) having medium barbs (barb length 24+- 1mm barb width 19+-1mm, pitch between two barbs 35+-1mm), spring core wire (2.6mm thick) of hign tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 Grams/ metre and fixing to \\"Y\\" or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] Wire, stud tied with GI Staple and GI Clips to retain horizontal, including necessary bolts and coating with Px compound [Anti rust] complete all as specified and as directed. Note: Horizontal barbed wire & angle iron support shall be measured and paid sepately under relevent items of Schedule \\"A\\" as M&L. Measurement shall be made for stretched length. |
| 12 | Site clearance like clearing away all grass, vegetation, sapling, shrubs, brush-wood, under-growth, roots and trees not execeeding 30cm girth (measured one meter above groound level) for making approach to fencing and removing rubbish upto a distance of 50m complete all as specified and directed. Please Enable Macros to View BoQ information |
