|
| 1 | Demolition of reinforced cement concrete in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed. |
| 2 | M & L for use & waste Form work to chajjas, troughs and similar items including edges flat for rough finished surfaces of concrete complete all as specified and directed. |
| 3 | M & L for use & waste Form work to fins, louvers, fascia, parapets etc for rough finished surfaces of concrete complete all as specified and directed. |
| 4 | M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. |
| 5 | M & L Reinforced Cement Concrete M-30 (Design Mix) (using 20 mm graded stone aggregate) as in chajjas etc complete all as specified and directed.(Note : Reinforcement will be measured & paid seperately) |
| 6 | M & L for Reinforced Cement Concrete M-30 (Design Mix) (using 20 mm graded stone aggregate) as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately) |
| 7 | M & L for Reinforced Cement Concrete M-30 Design Mix (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, and in shelves and the like etc complete all as specified and directed. (Note: Reinforcement will be measured and paid seperately) |
| 8 | S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 9 | S & F high strength corrosion resistant TMT steel bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 10 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish outside MD land as directed by the Engr-in-Charge. |
| 11 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed |
| 13 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 14 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 15 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 16 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 17 | Chipping of unsound /weak concrete materials from slabs , beams,columns ,lintel,chajja, fin , facia etc. (upto 50mm average thickness for slabs/Chajja) by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and disposal of all debris out of MOD land and complete all as specified and as directed by Engr-in-Charge |
| 18 | M&L for providing 25 mm thick (av thickness) cement morter 1:3 in soffit of slab,chajjas etc by pressure grouting over and including a coat of acrylic emulsion cement modifier to facilate proper bonding with old surface including double layer scafilding complete all as specified and directed Make :- Acrylic emulsion cement modifier :- Nitobond AP of FOSROC or equivalents chemical of SIKA / STP / HINDCON as approved by GE. |
| 19 | M&L for providing 30 mm thick (av thickness) cement morter 1:3 in columns/beams/fins/parapets etc by pressure grouting over and including a coat of acrylic emulsion cement modifier to facilate proper bonding with old surface including double layer scafilding complete all as specified and directed Make :- Acrylic emulsion cement modifier :- Nitobond AP of FOSROC or equivalents chemical of SIKA / STP / HINDCON as approved by GE. |
| 20 | M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 21 | Material and labour for prepaqration of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 22 | M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 23 | Material and labour for preparation of old decorated plastered (distempered) surfaces of wall (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) and applying one coat of oil bound washable distemper complete all as specified and directed by Engineer -in-Charge.Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 24 | Material and labour for preparing old exterior emulsion painted surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property , complete all as specified and as directed. Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 25 | M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 26 | M & L preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed. |
| 27 | M & L preparing old decorated surfaces of ceiling, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed. |
| 28 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 29 | M & L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 30 | M & L for Writing letters or figures (Block ,Roman, Italic or Indian) n. exc 30 cm height with synthetic enamel paint complete all as specified and directed. |
| 31 | M & L for Writing stops, commas, short lines , dashes, hyphens, brackets, etc with synthetic enamel paint complete all as specified and directed. |
| 32 | Complete removing the plants from the surfaces of the building with complete roots, applying recommended chemical to prevent further growth as directed, making good the disturbed surface with cement mortar 1:3 and applying the same surface finish of the existing surface and finished to match with the surrounding surfaces including removal of debris etc., out side the premises complete all as required complete all as specified and as directed. |
| 33 | Dismantling 100mm bore, cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required and as directed. |
| 34 | M & L for 100mm bore, Cast iron, sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls etc with all fixing accessories complete all as specified and directed. |
| 35 | M & L for 100mm bore, Cast iron, sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 36 | M & L for 100 mm bore, Jointing only cast iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints complete all as specified and directed. |
| 37 | M & L for 75 mm bore, Jointing only cast iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints complete all as specified and directed. |
| 38 | S & F in repairs, 100 mm bore, Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 39 | S & F in repairs, cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B2 using 20mm graded aggregate complete all as specified and as directed. |
| 40 | M & L for 100mm bore, cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 41 | M & L for 100mm bore, cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 42 | S & F in repairs Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe complete all as specified and directed. |
| 43 | M & L for Preparation of old external surfaces of cast iron pipe 100mm dia and applying one coat of Epoxy paint complete all as specified and directed. |
| 44 | Taking down eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 45 | S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, single socketed with rubber ring joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed. |
| 46 | S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, single socketed with rubber ring joints, laid in trenches or in floors, etc complete all as specified and directed. |
| 47 | S & F 75 mm bore, PVC (SWR), Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and directed. |
| 48 | S & F 75 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed. |
| 49 | S & F in repair 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 50 | S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 51 | S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 52 | S & F 110 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 53 | S & F 75 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed. |
| 54 | S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 55 | S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 56 | S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed. |
| 57 | Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 58 | Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 59 | Taking up or down 25 or 32 mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 60 | Taking up or down 40 or 50mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. |
| 61 | Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 57 above) |
| 62 | Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 58 above) |
| 63 | Refixing of 25 to 32mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 59 above) |
| 64 | Refixing of 40 or 50mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 60 above) |
| 65 | Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 66 | Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 67 | Supply, laying, connection and testing, 25mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 68 | Supply, laying, connection and testing, 40mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 69 | Supply, laying, connection and testing, 50mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. |
| 70 | S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 71 | S & F in repair 25 mm bore, gun metal, globe or Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 72 | S & F in repairs, 50 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 73 | Supply, laying, connection and testing, 25mm outer dia 3- layer PP-R Polypropylene random copo-lymer) concealed pipes SDR 7.4 & PN16 stablised and antimi-crobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc complete all as specified and directed |
| 74 | Supply, laying, connection and testing 32mm outer dia 3- layer PP-R Polypropylene random copo-lymer) pipes SDR 7.4 & PN16 stablised and antimi-crobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc complete all as specified and directed |
| 75 | Supply, hoisted and fixing in position 500 Ltrs capacity rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long including taking down old unserviceable tank complete all as specified & directed. |
| 76 | S & F in repairs, 20 mm bore, ball brass valves, high pressure, with polythene float and fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 77 | Removing of concrete all around reinforcement bar upto 12 mm dia from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free and applying two component epoxy zinc rich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre including all necessary scaffolding complete all as specified and directed.Make- Nitozinc primer of FOSROC or equivalents chemical of SIKA/ STP/ HINDCON as approved by GE. |
| 78 | All as per item no 77 here-in-before but above 12 mm dia bar |
| 79 | M&L for introducing new reinforcement bars upto 12 mm dia for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed.(upto 4 storey High.) Make :- Hilti HY 150/ Fosroc Lockfix E 75 chemical or quivalents solutions SIKA /STP/ HINDCON as approved by GE. |
| 80 | All as per item no 79 here in before but over 12 mm dia bar complete all as specified and directed. |
| 81 | Supply, materials and application of two component structural grade polymer modified reinstatement mortar of minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. Single component acrylic polymer emulsion to be applied @ 6-8 sqm/lit before the application of modified polymer mortar .The morter shall be applied in layers exc 5 mm thick in layers and including surface preparation ( maximum coverage area 1.3 sqm at 10 mm thikness per 25.25 kg bag ) Note:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements .Make: (a) Acrylic polymer emulsion primer : Nitobond AR of FOSROC or equivalents solutions SIKA/STP/HINDCON as approved by GE. (b) Polymer modified reinstatement mortar:- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP/HINDCON as approved by GE. |
| 82 | Material & labour for providing and placing in position free flow non shrink cementious microconcrete of Grade of M-50 to the effected beam, column etc. The micro concrete shall have a minimum 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength 5N/mm2 @ 28 days, minimum flextural strength 5N/mm2 @ 28 days and complete all as specified and directed by Engineer-in-Charge. 80 to 100 mm average thickness of column,beam and similar structural members including use and waste of water tight formwork to facillitate pouring of micro concrete including surface preparation etc. as per manufacturers instruction.Make(micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP as approved by GE. |
| 83 | Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided for as in roof padding etc including old detoriated roof treatment and bedding layer and removing debries and rubbish to a distance outside MD land complete all as specifed and directed. |
| 84 | M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed |
| 85 | Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed. |
| 86 | M & L for 10 mm thick, screed bed as in roof in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 87 | M&L for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:-(a) Preparing and cleaning of fully dry surfaces as per IS3067-1966(b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface.(c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application.The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. |
| 88 | M & L for cement concrete tiles of size 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, including 15 mm thick screed bed in cement mortar 1:6 and set & jointed in neat cement slurry and pointed in with mixture of white and grey cement equal proportion and no pigment complete all as specified and directed. |
| 89 | S & F in repairs, 25 mm bore, ball brass valves, high pressure, with polythene float and fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 90 | M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
