|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Maint of Pumping system, pipe lines and valves at ASC Bde, 31 RR, Engr Regt, Krimchi complex and maint of distribution header, Sluice valve, non return valve, Air Release Valve and allied works at various locations under GE (Utilities) Udhampur Contract No: GE/U-60/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | M&L for dismantling of Inlet and outlet connections from existing old header including Sluice valves , NRVs, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Fixing only sluice valve with flanged ends, any pattern of size 150mm dia obtained from Item No 01 complete all as specified and directed by Engineer-in-Charge. |
| 4 | Description all as per Ser Item No 2.00 here-in-before, but size of dia 100 mm |
| 5 | Supply and fixing MS ERW pipe of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (01 x 150 mm/1x 80mm) ,flow side and 03 outlets from distribution side (02x 80mm,1 x50mm)suitable to MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 6 | Supply and fixing MS ERW pipe of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked, in 3.5 meter long with welded flanges, MS flanges not less than 24 mm thick on both ends closed with end plates including provision of 02 nos inlets (2x 150 mm ) from pump side and 03 outlets from distribution side ( 01 x 150mm, 01 x 100mm, 02 x80 mm, dia MS pipe , 6 mm wall thickness with not less than 22 mm thick MS welded flanged ends including paint with two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pillar complete all as specified and directed by Engineer-in-Charge. |
| 8 | Grouting of nut bolts in the PCC pillar to support the header on both side with clamps, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply fabrication and fixing MS joints like Flanged, bends, Tapers, tail piece (any type) caps, plugs for 100 mm to 300 mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 10 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of soft/dense soil. complete all as specified and directed by Engineer-in-Charge. |
| 11 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge. |
| 12 | Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 13 | Taking up or down CI/DI/MS water mains pipe 200 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket with rubber gasket complete all as specified and directed by Engineer-in-Charge. |
| 14 | Taking up or down CI/DI/MS water mains pipe 250 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket with rubber gasket complete all as specified and directed by Engineer-in-Charge. |
| 15 | Refixing MS/DI/CI pipe obtained from item No. 13 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 250 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 250 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Refixing MS/DI/CI pipe obtained from item No. 12 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engineer-in-Charge. |
| 19 | Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engineer-in-Charge. . |
| 20 | Refixing GI/CI pipe obtained from Item No.18 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | Taking up or down GI pipe of size bore of pipe 100mm diaincluding all fittings complete all as specified and directed by Engineer-in-Charge. |
| 23 | Description all as per Ser Item No 21.00 here-in-before, but of size 80mm dia |
| 24 | Description all as per Ser Item No 21.00 here-in-before, but of size 50mm dia |
| 25 | Description all as per Ser Item No 21.00 here-in-before, but of size 40mm dia |
| 26 | Description all as per Ser Item No 21.00 here-in-before, but of size 25mm dia |
| 27 | Description all as per Ser Item No 21.00 here-in-before, but of size 20mm dia |
| 28 | Refixing GI/CI pipe obtained from Item No. 22 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of fbore 100mm dia. Complete including main/branch connections complete all as specified and directed by Engineer-in-Charge. |
| 29 | Description all as per Ser Item No 27.00 here-in-before, but bore of pipe 80mm dia |
| 30 | Description all as per Ser Item No 27.00 here-in-before, but bore of pipe 50mm dia |
| 31 | Supply & fixing only GI pipes in repair of bore of pipe 100mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | Description all as per Ser Item No 30.00 here-in-before, but of dia 80 mm dia |
| 33 | Description all as per Ser Item No 30.00 here-in-before, but of dia 50 mm dia |
| 34 | Description all as per Ser Item No 30.00 here-in-before, but of dia 40 mm dia |
| 35 | Description all as per Ser Item No 30.00 here-in-before, but of dia 25 mm dia |
| 36 | Description all as per Ser Item No 30.00 here-in-before, but of dia 20 mm dia |
| 37 | Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 38 | Stem bush bronze |
| 39 | Gland flange cast iron |
| 40 | Stud/Bolt carbon steel |
| 41 | Stem nut/chaknut |
| 42 | Stem Stain less steel |
| 43 | Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. |
| 44 | Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 45 | Stem bush bronze |
| 46 | Gland flange cast iron |
| 47 | Stud/Bolt carbon steel |
| 48 | Stem nut/chaknut |
| 49 | Stem Stain less steel |
| 50 | Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engineer-in-charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item |
| 51 | Stem bush bronze |
| 52 | Gland flange cast iron |
| 53 | Stud/Bolt carbon steel |
| 54 | Stem nut/chaknut |
| 55 | Stem Stain less steel |
| 56 | Supply and fix in replacement cast iron sluice valve of following sizes (PN 1.6) ISI Marked with iron wheel head both end flanged, steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers etc, including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 57 | Description all as per Ser Item No 40.00 here-in- before, but of size 300mm dia. |
| 58 | Description all as per Ser Item No 40.00 here-in- before, but of size 250mm dia. |
| 59 | Description all as per Ser Item No 40.00 here-in- before, but of size 200mm dia. |
| 60 | Description all as per Ser Item No 40.00 here-in- before, but of size 150mm dia |
| 61 | Description all as per Ser Item No 40.00 here-in- before, but of size 100mm dia |
| 62 | Description all as per Ser Item No 40.00 here-in- before, but of size 80mm dia |
| 63 | Description all as per Ser Item No 40.00 here-in- before, but of size 50mm dia |
| 64 | Supply and fixing in replacement of Cast Iron Non return valve suitable for 250mm borebore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 65 | Description all as per Ser Item No 41.00 but size of 200mm dia |
| 66 | Description all as per Ser Item No 41.00 but size of 150mm dia. |
| 67 | Description all as per Ser Item No 41.00 but size of 100mm dia. |
| 68 | Description all as per Ser Item No 41.00 but size of 80mm dia. |
| 69 | Supply and fixing in replacement of foot valve flanged end IS 4038, PN 0.2 , CI housing,door plate,strainer,fasteners of size 150 mm dia etc complete all as specified and directed by Engr-in-Charge. |
| 70 | Description all as per Ser Item No 46.00 but size of 100 mm dia. |
| 71 | Description all as per Ser Item No 46.00 but size of 80 mm dia. |
| 72 | Description all as per Ser Item No 46.00 but size of 65 mm dia. |
| 73 | Supply and fixing leather gasket including replacement old UNSV gasket for 300/250 mm complete all as specified and directed by Engr-in-Charge. |
| 74 | Supply and fixing leather gasket including replacement old UNSV gasket for 200/150 mm complete all as specified and directed by Engr-in-Charge. |
| 75 | M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 250 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge. |
| 76 | Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. |
| 77 | Supply and fix Gland packing type 3 of size 12 mm made of asbustus grip with silicon complete all as specified and directed by Engr-in-Charge |
| 78 | Supply only lithium base grease AP3 in 20 Kg pack suitable for application to ball bearing with operating temp 30 to 120 degree celsious drop point 174 degree celsious, colourlight fawn complete all as specified and directed by Engr-in-charge. Make: Servo ( IOC)/Bhart petrolium/Castrol or equivalent make approved by E-in-C's Branch. |
| 79 | Supply only lead wool /spunyarn for jointing the CI pipes complete all as specified and directed by Engr-in-Charge. |
| 80 | Supply only leadl for jointing socket and spigot CI pipes complete all as specified and directed by Engr-in-Charge. |
| 81 | Demolition of existing valve pit chamber , M&L for masonry valve pit of any size internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed by Engr-in-Charge. |
| 82 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg, complete all as specified and directed by Engr-in-Charge. |
| 83 | Supply and fix in replacement of gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engr-in-Charge. |
| 84 | Description all as per ser item 60.00 here-in-before, but size of dia 40 mm gate valve. |
| 85 | Description all as per ser item 60.00 here-in-before, but size of dia 25 mm gate valve. |
| 86 | Description all as per ser item 60.00 here-in-before, but size of dia 20 mm gate valve. |
| 87 | Description all as per ser item 60.00 here-in-before, but size of dia 15 mm gate valve. |
| 88 | Material and labour for taking down by scraping and preparation the surface of the header approx 6 mtr long with sluice valve and NRVs at pump houses, OHT including repainting one coat of super quality of black enamel paint with one under coat of primer , etc complete all as specified and directedby Engr-in-Charge. |
| 89 | Material and labour for fabrication of MS sheets ,angle iron in replacement of old pit cover with necessary welding work and one coat of red oxide primer to the welded works and painted with black enamel paint complete all as specified and directed by Engr-in -Charge. |
| 90 | Material and labour for DI fittings suitable for socketed / spigot ,flanged /socketed suitabe upto 250mm bore as per IS 9523, with inside cement mortar lining and out side zinc coating with finishing layer of black bitumen complete all as specified and directed by Engr-in -Charge. |
| 91 | S & F in repair/replacement of monoblock self priming pumping set suitable for electric driven 415V, AC, 50 Hz, 3 Pole suitable for 65/50 mm dia sucton /delivery complete of capacity 5HP/3.7 KW, 1, steel body, discharge 700 LPM at 42 Mtr Head, including provn of suitabled size connecting piece/distance piece suitable to connect the pump with pipe & necessary arrangement for welding/fixing with pump end including copper conductor cable 6sqmm 3core 50mtr with DOL Starter complete all as specified and directed by Engr-in-Charge. |
| 92 | Supply &fixing for compact universal Stequa 411 AE refill applicator of the following specification:Multy-cavity 100 L water treatment sanitattion with propotional dose adjustment option Diaphragm free, tube based self priming fluid delivery drive unit to prevent air/vapour locks and dry run problems. Prime loss : Zero.Agiator free system to prevent environmental corrosion,Fluid release upto 5 LPH independent of back pressure upto 7 bars.Erosion enabled system for controlled release of chlorine with accurate output reproducibility integrated plug & play system operating on single phase 230V 50Hz power source, complete all as specified and directed by Engr-in -Charge.Make Declibac or equivalent. |
| 93 | Suply only plastic cylindrical disposable sanitiser refill containing solid chlorine for disinfection of dinking water, with arrangement for controlled release of disinfectant in water,suitable for operation through recommended dosing system.Replacement indication: visual & weight variation.Water contact orfice design : sealed when dry,exposed upon immersion.Operation type: Non contact,non inhalatory. Cylinder dia: 2.5 inches plus or minus 0.5 inches. Cylinder height: Minimum 10.00 inches (+ or -) 0.5 inches complete all as specified and directed by Engr-in -Charge.Make (declibac or equivalent) |
| 94 | Matrial & labour for fabricating and installing for suction/delivery line (150/100 mm) for pump sets,including all materials, labour,tools,and plant, complete with cutting,welding,and finishing to the required length( approx 10mtrs for suction line) including all fittings, access ories and allied works, complete all as specified and directed by Engr-in -Charge. |
| 95 | M& L for complete dewatering and cleaning of overhead MS tank of capacity upto 20 KL gallons with high pressure jet to remove all masses ,algae and dirt and removal of dirty water along with sludge using sludge machine and disposal of same to a safe distance and including scrubbing of internal surface using industrial vacuum machine and applying of anti-bacterial sterilization spray and apply one coat food grade paint to wall , floor and ceiling , internal surface of reservoir where applicable complete all as specified and directed by Engr-in -Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
