|
| 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land distance exc 1.5 km but n.exc 5.00 km complete all as specified and directed |
| 2 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 3 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 4 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 5 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 6 | M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 7 | All as per item no 6 here in before but on ceiling |
| 8 | M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying two coats of wall care putty exterior grade to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 9 | Material and labour for applying one coat of oil bound washable distemper to old decorated plastered (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 10 | All as per item no 9 here in before but on ceiling |
| 11 | M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of oil bound washable distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 12 | M & L for preparing old decorated surfaces of walls including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 13 | M & L for preparing old decorated surfaces of ceiling including cornices, pilasters etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 14 | M&L for preparation of old decorated surface of wall by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of plastic emulsion paint over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 15 | Material and labour for applying one coat of plastic emulsion paint to old decorated plastered surfaces of wall including preparation of surface complete all as specified and directed by Engineer -in-Charge.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 16 | M&L for preparation of old decorated surface of wall by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of interior/exterior emulsion paint over a coat of primer including applying one or more coat of wall care putty including making texture finish of any pattern/design on the surfaces including all necessary scaffolding complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 17 | M&L for preparation of old decorated surface of wall by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of stucco paint over a coat of stucco primer with professional airless sprayer and back roller with a medium nap roller including all necessary scaffolding complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 18 | M & L for preparing old decorated surfaces of wall/chajja, etc including cornces by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of cement base paint complete all as specified and directed. |
| 19 | Material and labour for preparing old exterior emulsion painted surfaces of walls up to four storyes high by washing, rubbing down stopping of painted surfaces and applying one coat of water based acrylic weather proof exterior emulsion paint having dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property including necessary scaffolding, complete all as specified and as directed. Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 20 | All as per Serial item No. 19 above but five to eight storeys high complete ditto |
| 21 | All as per Serial item No. 19 above but nine to twelve storeys high complete ditto |
| 22 | M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 23 | M & L for preparation of old painted steel surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint when unconnected with other painting or when painted in different tint complete all as specified and directed. |
| 24 | M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | M & L for preparation & cleaning of old polished wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one or more coat of french polish complete all as specified and directed. Please Enable Macros to View BoQ information |
