|
| 1 | BLDG WORKS (06 GUARD POST)M & L for laying of 40 mm thk PCC (1:2:4) 20 mm graded agg. over 75mm thick PCC subbase (1:3:6) with 40 mm graded stone aggregate as in floor, path, hardstanding incl necessary formwork complete all as specified and directed. |
| 2 | S & F steel window with side hung shutters including box type hinges with steel handle and steels peg stay complete with glazing bars, dove tailed or welded complete all as specified and directed by Engr-in-charge. |
| 3 | S&F pressed steel frame of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified, supplied and fixed complete all as specified and directed by Engr-in-charge. |
| 4 | S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two or more panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge. |
| 5 | S & F Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 6 | S & F Aluminium handles, cast type, anodised of Length 150 mm complete all as specified and directed. |
| 7 | S & F butt Hinges of length 100 mm made of Stainless steel complete all as specified and directed. |
| 8 | S & F Aluminium anodised,barrel tower bolts of length 200 mm with extruded section and fixed complete all as specified and directed. |
| 9 | S & F Aluminium anodised door stopper 150 mm length complete all as specified and directed. |
| 10 | M & L for Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed by Engr-in-charge. |
| 11 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 12 | Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 13 | M & L for Machine cut kota stone slab flooring 20-25mm thick laid over cement screed base 20 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the existin shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 14 | M & L for machine Kota stone slab 20-25mm thick as in skirting, riser of steps, dado and pillar and jointed with grey cement slurry mixed with pigment to match the shade of the existing slab including rubbing and mirror polishing over 10 mm thick rendering in CM (1:4) as backing coat complete all as specified and directed. |
| 15 | M & L for coloured non skid ceramic tiles, premium quality 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match along with Screed bed or bedding layer of 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 16 | M & L for Glazed Coloured ceramic tiles, Premium quality in vertical surface as in dado 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match along with 10 mm thick CM (1:4) rendering complete all as specified and directed. |
| 17 | M & L for Rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surfaces with even and smooth finish without using extra cement complete all as specified. |
| 18 | S& F APP based Polymeric membrane minimum weighing 3 Kg per Sqm and Minimum 3 mm reinforced with polyester non woven fabric( wt not less than 150 gm per sqm) laid on primed surface by forced application complete all as specified and directed. |
| 19 | M & L for applying a coat of approved bitumen primer @ 10 litre/10 Sqm over concrete surface complete all as specified and directed. |
| 20 | M & L for applying ALUMINIUM PAINT on Roof surfaces over APP Membrane complete all as specified. |
| 21 | M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 22 | M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed. |
| 23 | M & L for preparation of new wall surfaces and applying two coats of white wash on internal surfaces complete all as specified and directed. |
| 24 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 25 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position all as specified alongwith Ball brass valves,high pressure polythene float 20 mm dia and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 26 | S & F PVC valveless, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet,ball valve, float and handle including brackets complete all as specified and directed. |
| 27 | S & F Vitreous China wash basin, white, flat back, size 550x400mm including brackets and waste fittings all complete and specified by Engr-in-Charge. |
| 28 | S &F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, including with integral foot rests (excluding flushing cistern and flush pipe) all complete and specified by Engr-in-Charge. |
| 29 | S & F PVC connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 30 | S&F PVC waste pipe for Wash hand basin siutable for 32 mm waste coupling complete all as specified and directed. |
| 31 | S & F Bib tap fancy type, chromium plated, cast copper alloy with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferule and fixed , finish suitable for 15 mm bore complete all as specified and directed. |
| 32 | S & F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all suitable for 15 mm bore complete all as specified and directed. |
| 33 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 34 | S & F Brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges incl all fittings & fixtures complete all as specified and directed. |
| 35 | S & F Cast iron NAHANI TRAP, 100 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4 ) type B-1 etc complete all as specified and directed. |
| 36 | S & F 125 mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete. |
| 37 | S & F Gully Trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 38 | S & F Cast iron soil, waste and vent pipes 100 mm bore, sand casted in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 39 | S & F Cast iron soil, waste and vent pipes 100 mm bore, sand casted in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 40 | S & F Galvanised iron tubes 15 mm bore medium grade with all fitting and fixed complete to walls/ceilings or laid in floor complete all as specified. |
| 41 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 42 | S & F Galvanised iron tubes 20 mm bore medium grade with all fitting and fixed complete to walls/ceilings or laid in floor complete all as specified. |
| 43 | S & F Stop valves / Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with 20 mm bore pipe all as specified and directed. |
| 44 | S & F Stop valves fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with 20 mm bore pipe all as specified and directed. |
| 45 | S&F Corner Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified and directed. |
| 46 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as spd |
| 47 | S&F Cast iron cowls 100 mm bore size all as specified and directed. |
| 48 | M&L for preparation of new wooden surface of any, not otherwise described, over 10 cm width or girth and applying 2 coats of synthetic enamel paint incl one coat of pink primer all complete as specified and direceted. |
| 49 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 50 | SECURITY WALL(RCC) Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge. |
| 51 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depthbut not Exc 3 m in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge. |
| 52 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all specified and as directed. |
| 53 | Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all specified. |
| 54 | M&L for Cement Concrete (1:3:6) type C-2 (using 40mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 55 | M&L for Mild steel TMT bars 10mm dia and over, cut to length and bent to shape required including cranking bending and including MS wired (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 56 | All as per item No 55.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 57 | Use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete flat complete all as specified and directed. |
| 58 | All as per item No 57.00 here-in-before but to columns, sides of pillars, posts, etc. |
| 59 | All as per item No. 57.00 here-in-before but to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete. |
| 60 | M & L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in Foundations, footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete complete all as specified and as directed. |
| 61 | M & L for RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 62 | M & L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in columns, pillars, posts and struts etc complete all as specified and directed. |
| 63 | M&L for Brick work with flyash bricks , straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) etc complete all as specified and directed. |
| 64 | M&L for Rendering 10 mm thick in cement mortar (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing fair faces of brick work or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed. |
| 65 | M&L for Rendering 10 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed. |
| 66 | M&L for MS angle iron/MS flat iron or other steel section drilled and countersunk etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 67 | S&F Mild steel screw bolts 16 to 20 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm but n. exc 22.5 cm long complete all as specified and directed. |
| 68 | M&L for MS Framed work as in doors or gates of angle or other section with gusset plates rails, braces etc. confirming to Fe-290 (Gde E-165 - A), complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed. |
| 69 | S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note : Each line wire to be measured.) |
| 70 | S&F CONSEC-ZAL Super Razor punched barb tape (SRPBT) Aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with following specifications:- (i) Dia of coil (when unstretched) - 610mm (ii) No of circles-51 turns per coil (iii) Weight of each coil with hessian pack - 8.50 Kg ( +0.5 ) (iv) Coverage per coil - 8 RM (v) Central core wire :- Made from 2.50 mm dia GI- H.T.S.S. wire as per IS-4454 galvanised as per IS-2629 . (vi) Razor Punched Strip:- Razor punched tape is CONSEC-ZAL Steel comprising of Aluminium base with Zinc coating @ 150 gm/Sqm conforming to ASTM A-792/A-792M with additional primer treatment of Epoxy/ Polyurethane & Final Paint Top coat of Caulfield green shade(BSL 139) by Hot Dipping process. (Note:- Running length of the wall shall be measured for payment purpose.) |
| 71 | M & L for providing reinforced cement concrete pipe 3000 mm dia class NP 2 with collars/ spigot/ socket, laid and jointed with cement joints complete all as specified and directed. |
| 72 | CHAIN LINK FENCEINGM&L for Cement Concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and directed. |
| 73 | S&F Mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n. exc 10 cm long complete all as specified and directed. |
| 74 | S&F Mild steel round bars (Fe-410-W Gde E-250 Quality A) 6 mm dia and over cut to length bent to required shape in fencing including straining and fixing to steel posts complete all as specified and directed. |
| 75 | Supply only Chain link MS galavnised fencing, mesh size 50 mm square, dia of mesh wire 3.15mm complete all as specified and directed. |
| 76 | Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 77 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome on steel surfaces of n exc 10cm in width or girth not otherwise described complete all as specified and directed |
| 78 | M&L for black bituminous paint on Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth complete all as specified and directed. |
| 79 | SEWAGE DISPOSALM & L for Excavating in trnches, n-exc 1.50m wide and n.exc 1.5m in depth, for foundation, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 80 | M & L for Excavation over areas, exc 1.50m wide and for foundation, n.exc 1.5m in depth and getting out in soft /loose soil complete all as specified and directed. |
| 81 | M & L for providing bed to drain pipes 150 mm dia in cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) including packing under & haunching against the sides of pipes after they are laid & tested complete all as specified and directed. |
| 82 | M & L for providing reinforced cement concrete pipe 150 mm dia class NP 2 with collars/ spigot/ socket, laid and jointed with cement joints complete all as specified and directed. |
| 83 | M & L for Brick work with sub-class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 84 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finishing even & smooth without using extra cement complete all as specified and directed. |
| 85 | Supply only integral water proofing compound. |
| 86 | M & L for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping,huanching, benching including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed |
| 87 | M & L for providing precast cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in landings, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles and perforated cover slabs (over drain), set in CM (1:6) etc complete all as specified and directed. (Note: Reinforcement shall be measured and paid seperately) |
| 88 | M & L for providing mild steel TMT bars 6 to 8 mm dia & over cut to length bent to shape required including cranking bending etc & binding with MS wires (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 89 | M & L for providing MS bands, straps and rungs in manholes and similar small articles all as directed conforming to Fe 310-0 complete all as specified and directed. |
| 90 | M & L for Removing excavated soil material exc 250m but n exc 500m & depositing where directed complete all as specified and directed. |
| 91 | M&L for Construction of RCC Septic tank conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC (1:4:8) below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 10 users complete all as shown in Drg and as directed. Note:- Rates are included for dewatering during construction. |
| 92 | M&L for construction of Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 x 3.0 m depth complete all as shown in Drg and as directed.Note:- Rates are included for dewatering during construction. |
| 93 | INTERNAL ELECTIC SUPPLYM&L for concealed Point wiring including cutting and chasing on wall/ roof surface controlled by one switch with 1.50 Sqmm (nominal area) FRLS, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLS, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, not less than 1.50mm thick, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and shadle including provision of mild steel terminal boxes/ Sunken boxes of suitable size made with 1.22 mm thick mild steel sheet recessed in wall and providing of with 3mm thick bakelite/ PVC sheet ISI marked top cover, suitable for fixing of switches/ sockets/ regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of sunken box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same)(ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)(a) One light point controlled by one, one way swtich 5/6 amps. |
| 94 | (b) One ceiling fan point/ Exhaust fan point controlled by one, one way swtich 5/6 amps. |
| 95 | (c) One 3 pin socket outlet, 5/6 amps, on independent board. |
| 96 | (d) One 3 pin socket outlet, 5/6 amps on the same board with other switches. |
| 97 | All as per ser item No. 93.00 herein before but with 2.5 Sqmm PVC copper stranded cable FRLS type for one 15/16 Amp 5 pin socket outlet point, independent, including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 98 | Supply and fixing Modular Switch, single pole, one way, 6 Amp, one module, 230 volt, ISI marked etc completes all as specified and directed. |
| 99 | Supply and fixing Modular Switch, single pole, one way, 16 Amp, one module, 230 volt, ISI marked etc completes all as specified and directed. |
| 100 | Supply and fixing Modular shuttered socket outlet, 5 pin, 6 Amp, two module, 230 volt, ISI marked etc completes all as specified and directed. |
| 101 | Supply and fixing Modular shuttered socket outlet, 6 pin, 6/16 Amp, two module, 230 volt, ISI marked etc completes all as specified and directed. |
| 102 | Supply and fixing modular electric fan regulator, 120 W, two module, suitable for 1200/1400 mm sweep energy saving fans, ISI marked etc complete all as specified and as directed by Engr-in-Charge. |
| 103 | Supply and fixing lamp holder, insulated body, PVC/Polycarbonate type with back plate suitable for batten/angle fittings, etc complete all as specified and as directed. |
| 104 | Supply and fixing LED white glass Lamp 1x7 watt, 230 volt, Base-22 etc complete all as specified and as directed. |
| 105 | Supply and fixing ceiling rose, bakelite, surface type, 220/240 volts, three terminal etc complete all as specified and as directed. |
| 106 | Supply and fixing IP 20, class I, LED light 1x20 W(or nearest next higher wattage) 4 feet, 5700K, wall/surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electric driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete with all accessories internally prewired and connecting up etc complete all as specified and as directed. |
| 107 | Supply and fixing Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LED as light source and driver of capacity 35 watts, with prewired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cable from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 0.75 Mtr long 32 mm dia, MS clamp, nut, bolt and washers etc complete with all accessories internally prewired and connecting up etc complete all as specified and as directed. |
| 108 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB's), Double door, single pole & neutral with 200 amps rated bus bar, 240Volt IP-43 protection suitable for fixing MCBs/Isolators etc complete all as specified and directed. |
| 109 | S&F MCB, Single pole & neutral, 32 amps, 240 volts, 'C' curve, 10KA etc complete as specified and as directed. |
| 110 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, 'C' curve, 10 KA etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 111 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, 'C' curve, 10 KA etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
