|
| 1 | Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and directed. |
| 2 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and directed. |
| 3 | M&L for brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 4 | Removal of existing roof treatment with plastering and cleaning the surface with wire brushes and washing and drying the top surface for execution of work complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | M&L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection/paving complete finished fair and even complete all as specified and directed. |
| 7 | Material and labour for 50mm thk (average) PCC 1:2:4 type B-1 using 20mm graded stone agg as in roof padding finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed. |
| 9 | M&L for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in levelling coarse under floor finished surface even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work complete all as specified and directed. |
| 11 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 12 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and user water proofing compound complete all as specified and directed. (Note : WPC will be measured and paid separately under relevant item) |
| 13 | M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces/ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces/ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | Supply only liquid water proofing compound complete all as specified and directed. |
| 16 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by propane torch application as per manufacturer's instructions over a coat of bitumen primer for use in water proofing/ damp-proofing treatments and applying bituminous coating on joints of APP membrane after laying to seal joints complete all as specified.and directed by Engr-in-Charge. |
| 17 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 18 | M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed. |
| 19 | M&L for two coats of aluminium paint including preparation of surfaces of approved brand and manufacture to give an even shade over roof treatment complete all as specified and directed. |
| 20 | Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaces over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish complete all as specified and directed. |
| 21 | Material and labour including preparation of new plastered surface for three coasts of white wash on ceiling suface over a coat of alkali resistant priming paint to give uniform and smooth finish complete all as specified and directed. |
| 22 | M&L for two coats of cement base paint including preparation of new plastered wall surfaces and applying priming plastered and other surfaces with alkali- resistant priming paint complete all as specified and directed. |
| 23 | Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 25 | Description all as per item Ser No. 24.00 here in before but as in skirting/dados etc. |
| 26 | M&L for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 rough finished to receive wall finishes complete all as specified and directed. |
| 27 | M&L for vitrified Ceramic tiles dark shade/double charged/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 28 | Description all as per item Ser No. 27.00 here in before but as in skirting including necessary cutting of tiles complete all as specified and directed. |
| 29 | Dismantling stone slabs laid, bedded and pointed in any mortar and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 30 | M&L for pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 31 | M&L for machine cut kota stone slab flooring 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 32 | Material and labour including preparation of old plastered surface for two coasts of white wash on ceiling suface to give uniform and smooth finish complete all as specified and directed. |
| 33 | M&L for preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying one coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 34 | M&L for preparation of old surfaces of wall including complete removal of existing treatment and preparation of surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 1mm wall care putty complete all as specified and directed. |
| 35 | M&L for preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying one coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 36 | M&L for preparation of old decorated surface of walls and applying two coat of weather coat (ACE) interior/exterior emulsion paint including preparation of surfaces and remove all dirt and efflorences etc. complete all as specified and directed. |
| 37 | M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified. |
| 38 | M&L Preparation of old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 39 | Taking down chowkhats or frames (without taking off shutters) area n. exc 1.5 sq. m each complete all as specified and directed. |
| 40 | Taking down chowkhats or frames (without taking off shutters) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed. |
| 41 | Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 each complete all as specified and directed. |
| 42 | Taking down shutters of any description area exc. 1 sq. m and n exc 2 sq. m each and refixing in same opening after repairing with necessary fittings complete all as specified and directed. |
| 43 | Taking down shutters of any description area exc. 2 sq. m each and refixing in same opening after repairing with necessary fittings complete all as specified and directed. |
| 44 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 45 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; door frame of MS angle with welded butt hinges, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 46 | S&F 30mm thick flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on with both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 47 | M&L 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 48 | S&F of solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube complete all as specified and directed. |
| 49 | S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 51 | S&F powder coated aluminium door shutters (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 04 Nos hinges, 02 Nos 200mm size tower bolt, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 52 | Supply and fixing factory made uPVC white colour Two track four panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) |
| 53 | Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 54 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide in any tint complete all as specified and directed. |
| 55 | S&F 5.5mm thick, sheet glass,ordinary quality and glazing with beading (any type) or oil putty in square exc 0.5 sq. m in each pane, etc complete all as specified and directed. |
| 56 | S&F 4.0mm thick, sheet glass,ordinary quality and glazing with beading (any type) or oil putty in square not exc 0.5 sq. m in each pane, etc complete all as specified and directed. |
| 57 | Hacking out old broken glass area exc. 1.5 Sqm each (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing new one complete all as specified and directed. |
| 58 | S&F 4.00mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 59 | S&F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 60 | S&F 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 61 | S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 62 | Supply & Fixing 150 mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 63 | Supply & Fixing 125 mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 64 | S&F Butt hinges, medium weight coldrolled mild steel and fixed 100mm size complete all as specified and directed. |
| 65 | S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size complete all as specified and directed. |
| 66 | S&F 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for WHB complete all as specified and directed. |
| 67 | S&F in repair 15mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle chromium plated fancy type long shank and cup(concealed type), screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 68 | S&F in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed. |
| 69 | S&F 600 mm long 20mm dia brass chromium plated tubular towel rails complete all as specified and directed. |
| 70 | S&F in repairs 15 mm dia angle cock (two way) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for fixing of health faucet and PVC connections etc. complete all as specified and directed. |
| 71 | Providing and fixing 15mm C.P. brass long body bib cock of approved quality conforming to IS standards & weighing not less than 690 gms complete all as specified and directed. |
| 72 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC bldg board or commercial plywood fixed to wooden plugs with CP brass screws & cup washer complete all as specified and directed. |
| 73 | Providing and fixing sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing as per sample approval and directed by Engr-in-Charge. |
| 74 | S&F in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed. |
| 75 | S&F in repair vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing complete all as specified and directed. |
| 76 | Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed. |
| 77 | S&F in repairs 110mm dia PVC (SWR) 'P’ trap complete all as specified and directed. |
| 78 | S&F in repairs 110mm dia PVC (SWR) 'S’ trap complete all as specified and directed. |
| 79 | S&F PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer complete all as specified and directed. |
| 80 | M&L in repair for PVC waste pipe 32 mm dia flexible with cup & pressure rating 6 kgf/cm2 to fit wash hand basin waste coupling complete all as specified and directed by Engr-in-Charge. |
| 81 | Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down complete all as specified and directed. |
| 82 | M&L for servicing/ easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges,handles ,stay etc and making good disturbed portion painting complete all as specified and directed. |
| 83 | Taking out steel water tubing and connections including cleaning for refixing 15 mm dia complete all as specified and directed. |
| 84 | Description all as per item Srl No. 82.00 here in before but 20mm dia complete all as specified and directed. |
| 85 | S&F 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors complete all as specified and directed. |
| 86 | Description all as per item Srl No. 84.00 here in before but 20mm dia complete all as specified and directed. |
| 87 | Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia (Note: Serviceable pipes & fiitings obtained from item 50 to be re-used) complete all as specified and directed. |
| 88 | Description all as per item Srl No. 86.00 here in before but 20mm dia. |
| 89 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 90 | Dismantaling of cast iron / RCC/ PVC drain pipes 75/110mm dia jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and directed. |
| 91 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 75 mm with PVC clamps and saddles complete all as specified and directed. |
| 92 | Description all as per item Srl No. 90.00 here in before but bore of pipe 110 mm |
| 93 | S&F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed. |
| 94 | Description all as per item Srl No. 92.00 here in before but bore of pipe 110 mm with access door complete all as specified and directed. |
| 95 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm bore complete all as specified and directed. |
| 96 | Description all as per item Srl No. 94.00 here in before but bore of pipe 110 mm bore complete all as specified and directed. |
| 97 | S&F PVC (SWR) reducers 110 mm bore complete all as specified and directed. |
| 98 | S&F PVC (SWR) vent cowl bore of 110 mm bore complete all as specified and directed. |
| 99 | S&F PVC (SWR) bends any radius of bore 75 mm bore complete all as specified and directed. |
| 100 | S&F PVC (SWR) bends any radius of bore 110 mm bore complete all as specified and directed. |
| 101 | Supply and Fix 4 levers Brass Mortice lock, vertical type,of Size 100 mm all as specified in SSR Part-I and complete all as specified and directed. |
| 102 | Supply and Fix in repairs double action floor springs aluminium body hydraulically regulated made up of minimum 1.2 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MA heavy duty universal type conforming to relevant IS complete all as directed by Engineer in Charge . |
| 103 | S&F in repairs Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, fixed in floor, 150mm size. |
| 104 | S&F in repairs PVC coloured vertical blind / roller blind hanging on powder coated hanging arrangement including roller and all necessry fixing and fetures as per manufacture instruction. or directed by GE/Engr-in-Charge complete all as specified and directed. |
| 105 | Dismantling boarding of any description and fixed in any position fixed with nails or screws complete all as specified and directed. |
| 106 | Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with semi perforated 12mm thick micro tegular edge GRG false ceiling tiles of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic raw! plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. Please Enable Macros to View BoQ information |
