|
| 1 | Cement concrete of proportion (1:2:4) in F&F using 12mm size cb/hb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect. |
| 2 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris with in 50m lead including cost of all labour with T&P etc. complete. |
| 3 | 1st Floor |
| 4 | Providing, fitting, fixing of Aluminium. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member & 12mm thick pre laminated board fixed on door frame by means of tapered clip No. 4660 & the frame to be completed by means of jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 5 | 1st Floor |
| 6 | Providing & fixing Plain Gypsum board ceiling suspended from roof by adjustable G.I. ceiling angle with spread at a distance not more than 600mm fixed to roof by Rowl Plug & stiff cleat, Gupsum board 12.5mm thick held by G.I. perimeter channel MF-3 & intermediate channel MF-7, framing, boarding, jointing & finishing with special type of gypsum compound etc. including cost , conveyance & taxes of all materials, labour with T&P etc. complete in all respect as per the direction of the E-I-C. |
| 7 | 1st Floor |
| 8 | Providing fixing and fitting of Cornice for Gypsum borad ceiling 4'' wide of approved quality and approved make confirming to I S with necessary bends etc.complete fixed to wall with Screw etc asper the direction of Engineer in charge including cost of all material with taxes labour T&P etc complete. |
| 9 | 1st Floor |
| 10 | 12mm thick cement plaster in cm (1:6) finished smooth to brick masonry including watering, curing, cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect. |
| 11 | 1st Floor |
| 12 | 6mm thick cement plaster in cm (1:4) finished smooth to RCC surface including watering, curing, cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect. |
| 13 | Fly Ash Brick work with Fly Ash Bricks of 23cm.x 11cm.x 8cm. size having crushing strength not less than 75 Kg/Cm2 in cement mortar (1:6) in superstructure including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, taxes & royalties of all materials, labour with T&P etc. complete in all respect. |
| 14 | Providing, fitting, fixing up partition walling OEL aluminium anodized section No. 9210 and 9207 ( Powder Coated) as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board and jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 15 | 1st Floor |
| 16 | Wall painting two coat with Plastic Emulsion paint of approved shade on old/new work of approved make to give an even shade after scrapping old paint with scrapper, washing with soda water primming with approved wall primer etc including cost of all materials, labour with T&P etc. complete in all floors as per the direction of E-I-C. |
| 17 | 1st Floor |
| 18 | Finishing wall surface with Acrylic wall putty of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour with T&P etc. complete in all floors. |
| 19 | Providing weather coat two coats to outside wall surface with approved shade including cost, conveyance, taxes, cess and royaltieis of all materials with cost of paint, blue with labour and T&P etc., required for the work complete and as per direction of Engineer-in-charge. |
| 20 | 1st Floor |
| 21 | Enamel Painting two coats with any approved paint to old wood/iron works including cost of paint, sand papering, polishing the surface including cost, conveyance, taxes, cess and royaltieis of all materials with cost of paint, blue with labour and T&P etc., required for the work complete and as per direction of Engineer-in-charge. |
| 22 | Fixing of Vetrified tiles Plain/ivory in floors, Trades of steps & Landing with with cement morter(1:4) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 23 | 1st Floor |
| 24 | Fixing of Vetrified tile in Dado with with cement morter(1:3) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 25 | 1st Floor |
| 26 | Providing, fitting, fixing up Allluminium jally with OEL aluminium anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board and jointing angle No. 1855 including all fitting ,cost of all materials, taxes, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 27 | 1st Floor |
| 28 | Supplying, fitting, fixing of WPC ( Wood Polymer Composite ) Choukhat ( Size 50x125mm ) with cost of all materials, taxes, labour with T&P etc. complete |
| 29 | 2.5cm thick grading concrete of proportion (1:2:2) over roof slab using 12mm to 6mm size cb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect. |
| 30 | Supplying, fitting & fixing of openable UPVC Doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings & fixtures. |
| 31 | Supplying and fixing of 750mm dia razor wire concertina coil with 6mt (equivalent to 50 spirals) length coils clipped with two nos of straight line razor and fixing U shape ms Angle of size 50x50x6mm providing in the distance of 2.5mt centre to centre and seven row of Razor barbed tape and grouted on the wall and welded withspike grill for rigid fixing after dismantling the rquired brick work and fixing the coil with C.C. (1:2:4) in position and painting to M.S. angles with cost of all materials and labour etc required for the work. Please Enable Macros to View BoQ information |
