|
| 1 | Construction of 33 KV line for power supply to the proposed site envisaged for the project 'Redevelopment of Assam Police Reserve campus at AT Road, Paltan Bazar, Guwahati-01' in favour of Executive Engineer, Guwahati Electrical Division, PWD under Paltanbazar Electrical Sub-Division under Deposit Work Scheme on Full Turnkey Mode(refer Annexure-1) |
| 2 | Construction of 33 KV line for power supply to the proposed site envisaged for the project 'Redevelopment of Assam Police Reserve campus at HB Road, Panbazar, Guwahati-01' in favour of Executive Engineer, Guwahati Electrical Division, PWD under Paltanbazar Electrical Sub-Division under Deposit Work Scheme on Full Turnkey Mode(refer Annexure-2) |
| 3 | GI Steel Tubular Pole SP-76 (14.50) |
| 4 | GI channel (100x50x5x3200) mm |
| 5 | GI channel (100x50x6x2200) mm |
| 6 | GI angle 50x50x6 mm for cross bracing |
| 7 | GI angle 50x50x6 mm |
| 8 | GI Pole clamp of GI flat 50x6mm |
| 9 | 33 KV Polymeric pin insulator with C.D 900 mm |
| 10 | 11 KV Pin Insulator (Polymer) 5KN (FRP 24mm) |
| 11 | 33 KV 1C X 241 Sq MM AAAC triple extruded Covered Conductor |
| 12 | Tension hardware for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 13 | Tension insulator for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 14 | Cable tie for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 15 | IPC for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 16 | Termination Kit for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 17 | GI Nuts and Bolts with washer (assorted) |
| 18 | GI earthing Pipe 50mm dia 3m length 3.15mm thickness |
| 19 | GI Wire for earthing 8 SWG |
| 20 | 33 KV TPGO-DBCR without Earth switch with GI mounting Structure 630 Amps |
| 21 | 33 KV GOAB Switch 400Amp |
| 22 | 33 KV DO Fuse 150A assembly |
| 23 | 33 KV 10KA Lighting Arrestor without Surge Counter & GI Mounting Structure |
| 24 | Bi-metallic 240 Sq mm |
| 25 | 33 KV XLPE Cable 1C X 400 sq mm aluminium armoured |
| 26 | HDPE pipe PE100 grade 110 mm outer dia |
| 27 | 33 KV XLPE Cable jointing kit 1C X 400 sq mm outdoor type |
| 28 | Shackle Insulator Porcelain |
| 29 | LT GI Shackle Strap with Bolts |
| 30 | GI LT Angle Cross Arm (40x40x6x500)mm |
| 31 | 3Ph 4 wire combined CTPT Accuracy class 0.2, 50/5A, STC: 6.4 KA for 1 sec |
| 32 | Control cable copper 10Cx2.5sqmm |
| 33 | HT Danger Plate |
| 34 | Sundries |
| 35 | Grouting & mufflering of steel tubular pole of type SP-66 and SP-76 as per specification and drawing with minimum planting depth of 2.15 m (using PCC) |
| 36 | GI Steel Tubular Pole SP-76 (14.50) |
| 37 | GI channel (100x50x5x3200) mm |
| 38 | GI channel (100x50x6x2200) mm |
| 39 | GI angle 50x50x6 mm for cross bracing |
| 40 | GI angle 50x50x6 mm |
| 41 | GI Pole clamp of GI flat 50x6mm |
| 42 | 33 KV Polymeric pin insulator with C.D 900 mm |
| 43 | 11 KV Pin Insulator (Polymer) 5KN (FRP 24mm) |
| 44 | 33 KV 1C X 241 Sq MM AAAC triple extruded Covered Conductor |
| 45 | Tension hardware for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 46 | Tension insulator for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 47 | Cable tie for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 48 | IPC for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 49 | Termination Kit for 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 50 | GI Nuts and Bolts with washer (assorted) |
| 51 | GI earthing Pipe 50mm dia 3m length 3.15mm thickness |
| 52 | GI Wire for earthing 8 SWG |
| 53 | 33 KV TPGO-DBCR without Earth switch with GI mounting Structure 630 Amps |
| 54 | 33 KV GOAB Switch 400Amp |
| 55 | 33 KV DO Fuse 150A assembly |
| 56 | 33 KV 10KA Lighting Arrestor without Surge Counter & GI Mounting Structure |
| 57 | Bi-metallic 240 Sq mm |
| 58 | LT Pin Insulator (Porcelain) |
| 59 | LT GI Pin |
| 60 | Shackle Insulator Porcelain |
| 61 | LT GI Shackle Strap with Bolts |
| 62 | GI LT Angle Cross Arm (40x40x6x500)mm |
| 63 | 3Ph 4 wire combined CTPT Accuracy class 0.2, 15/5A |
| 64 | Control cable copper 10Cx2.5sqmm |
| 65 | HT Danger Plate |
| 66 | Grouting & mufflering of steel tubular pole of type SP-66 and SP-76 as per specification and drawing with minimum planting depth of 2.15 m (using PCC) |
| 67 | Dismantling of GI Steel Tubular Pole SP-66 (12.00) |
| 68 | Dismantling of PSC Pole 8.5m |
| 69 | Dismantling of GI channel (100x50x6x2200) mm |
| 70 | Dismantling of GI angle 50x50x6 mm |
| 71 | Dismantling of G.I Pole clamp of GI flat 50x6mm |
| 72 | Dismantling of 11 KV Pin Insulator (Polymer) 5KN (FRP 24mm) Please Enable Macros to View BoQ information |
