|
| 1 | Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 2 | Construction of block of Laundry Plant (S/S) complete all as shown on drawings and as specified. |
| 3 | Total Amount of Sch 'A' Part - II (Site Clearance and Development Work) |
| 4 | Total Amount of Sch 'A' Part - III (Internal Water Supply Work) |
| 5 | Total Amount of Sch 'A' Part - IV (Internal Electric Supply Work) |
| 6 | Total Amount of Sch 'A' Part -V (Area drainage Work) |
| 7 | Total Amount of Sch 'A' Part -VI (Sewage Disposal Work) |
| 8 | Total Amount of Sch 'A' Part -VII (Road and Path Work) |
| 9 | Total Amount of Sch 'A' Part -VIII (External Water Supply Work) |
| 10 | Total Amount of Sch 'A' Part -IX (External Electric Supply Work) |
| 11 | Sch 'A' Part - X (Misc Items of work including mechanical laundry) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 12 | Concealed sub main wiring of two run with 06 sqmm single core PVC insulated, FRLSH, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit 25mm dia, medium grade, ISI marked and fixed, including cutting /chasing as required and its accessories including one run of 6 Sqmm single core PVC insulated, FRLSH, multi stranded copper conductor cable as earth continuity conductor in green colour, connected to common earth dolly, complete all as specified and as directed. Note:- Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only. |
| 13 | Point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc; modular metal flush box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick including modular top cover plate as per numbers of switch modules for fixing of modular switches, sockets, fan regulators, red colour indicator, blank plates etc. as approved colours and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- |
| 14 | All as per item No 12.00 here-in-before but one light/fan/bell point controlled by one switch |
| 15 | All as per item No 12.00 here-in-before but one socket outlet 3 Pin, 5 Amps, on the same board |
| 16 | All as per item No 12.00 here-in-before but one 3/5 pin socket outlet, 5 Amp on independent board |
| 17 | All as per Srl item No. 12.00 here-in-before but with 2.5 sqmm cable copper for 3 pin, 15 amps socket outlet and 3 pin, 5 amps socket outlet independent controlled by one switch on independent board, including 2.5 sqmm copper conductor PVC indulated sheathed continuous earth wire and connecting to common earth dolly. |
| 18 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 15mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.Note:- On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction. |
| 19 | LLDPE septic tank designed to carry sewage and sludge water, comprising earth work , excevation, returning filling, disposal of surplus spoils to a distance not exceeding 50 mtr from starting point in any type of soil, PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation, 200mm thick, vent shaft, connections etc; for 10 users (2000liters capacity) including all fittings, fixtures, testing on completion complete all as specified and directed. |
| 20 | Construction of soakage well (Brick construction) 3m dia and 4.50m deep below inlet pipe level (depth from inlet pipe to ground level 45cm), complete all as specified and shown on drg No. CEUZ/TD-1585/2021 sheet 1/4 to 4/4, complete all as specified and directed. |
| 21 | LED Lamp retrofit type 12 watt, B22 base holder, polycarbonate body and heat sink type complete all as specified and directed. |
| 22 | LED lights fitting 20W, 220V, 4 feet, general purpose surface and wall mounted LED batten with aluminium housing integrated electronic driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 23 | Sheet metal enclosure vertical (double door) TPN 04 way, 160A, IP 43 with MCCB incomer distribution board fitted with copper bus bar, neutral link, blanking plates, suitable for incoming MCCB upto 160 Amp, 4 pole 'G' frame, having isolated neutral bar, mechanical impact strength IK09, complete all as specified and directed. |
| 24 | MCCB, 4 pole, 415 volts, adjustable thermal & fixed magnetic setting type suitable for DB, 63 Amps with breaking capacity 16KA, complete all as specified and directed. |
| 25 | LED security light fitting of capacity 25 Watt LED street light fitting in aluminium pressure die casting (PDC) housing, toughened glass cover including GI bracket of size 1.5m long, 40mm dia, GI pipe, made to shape fixed with clamps, nut bolts and all connected accessories, IP65 protection with suitable inbuilt surge protector and including cable connection from ceiling rose to light fitting complete all as specified and directed. |
| 26 | Wall mounted fan of capacity of 400mm sweep Superior low voltage performance energy efficient and More than 2000 RPM, HI air thrust and Thermal overload protector (TOP) helps in protecting the motor in case of any high voltage fluctuation Rated Spee at 1850 revolution per minute Air delivery 100 m³/h Noise level 72.2 dB and Power Consumption 110 W Rated frequency50 Hz Rated Voltage 230 V and 3 speed, Pull cord for Speed and Oscillation Blade design of Aerodynamically designed & blanced blade all as specified and directed. |
| 27 | Industrial socket of 100 Amp, 3 phase, 415V, 50 HZ suitabe for heavy duty, corrosion-resistant PVC or die-cast aluminium alloy, often equipped with mechanical interlocks to prevent plugging/unplugging under load and MCB protection, IP ratings, IP67 for protection against water and dust all as specified and directed. |
| 28 | Industrial socket of 63 Amp, 3 phase, 415V, 50 HZ suitabe for heavy duty, corrosion-resistant PVC or die cast aluminium alloy, often equipped with mechanical Interlocks to prevent plugging/unplugging under load, and MCB protection, IP ratings, IP67 for protection against water and dust all as specified and directed. |
| 29 | Industrial plug of IP 44, rated suitable for industrial socket of current rate, 100 Amps complete all as specified and directed. |
| 30 | Industrial plug of IP 44, rated suitable for industrial socket of current rate, 63 Amps complete all as specified and directed. |
| 31 | Ladder type cable tray made of 2mm thick GI sheet with perforation of rungs of size 300mm wide, height of rails/runner as 100mm & interval of rungs as 250mm with side rail using suitable reverts, washers, bolts, supporting brackets of same make and all other accessories reuired for fixing the cable tray complete all as specified and directed. |
| 32 | Providing pre-polished factory made designer, high strength parking tiles of size 300mmx300mmx25mm thick (make, colour and pattern as approved by GE) with grey cement and pigment jointed and pointed with cement slurry and grey cement over and incl 20mm thick screed bed in cement mortar 1:4 to match the existing shade of tiles complete all as specified and directed. |
| 33 | Supply, installation, testing and commissioning industrial barrier hygeine type washer with extractor of capacity 50kg, computer controlled, front loading, open pocket, heavy duty, high spin top suspension with hydraulic cushions, full stainless steel cabinet, microprocessed controlled with 5 compartment automatic soap dispenser, stainless steel die pressed front, stainless steel inner cyclinder, outer drum, loading door front sides, top and back all in stainless steel AISI-304, inner basket has 3 lifter design, single motor with variable frequency inverter drive for various speeds for wash, distribution, low normal and high spin. Tuned suspension for vibration less performances. Fully programmable microprocessor, control upto 30 customised preset process. Step-by-step LED display instructions for cycle advance, variable time single process modification and diagnostic checks and also making all water supply including (inlet & outlet of the machine) and electrical connection (including making duct for UG cable and tray for OH cable complete all as specified and directed. |
| 34 | Supply, installation, testing and commissioning industrial drying tumbler of capacity 60kg computer controlled, front loading, cool down feature, auto-timed, auto reversible, dual motor drive, open pocket & front display, temperature control system, inner drum made with stainless steel AISI-304. Electrically heated complete all as specified and directed. |
| 35 | Supply, installation, testing and commissioning industrial drying tumbler of capacity 30kg computer controlled, front loading, cool down feature, auto-timed, auto reversible, dual motor drive, open pocket & front display, temperature control system, inner drum made with stainless steel AISI-304. Electrically heated complete all as specified and directed. |
| 36 | Supply, installation, testing and commissioning flat ironer roller heated type roller 1, 800mm x roller size 3300mm Electronic control panel with automatic speed reguation system, finger guard protection and start stop e mergency switch for figer guard, polyster padding electrically heated complete all as specified and directed. |
| 37 | Supply, installation, testing and commissioning flatbed press suitable for linen like uniform, room furnishing, personal garments, bed sheets & pillow Covers head & bed size 1500mmx750mm, electrically heated, auto-timed, auto-temperature controlled, double switch operation, built-in suction blower, pneumatically controlled complete all as specified and directed. |
| 38 | Supply, installation, testing and commisioning vacuum ironing table with hand iron and boiler 3 KW electrically heated complete all as specified and directed. |
| 39 | Stainless steel AISI-304 sinks with taps for wash and rinse using hot and cold water provided with stainless steel AISI-304 scrubbing board in between sinks, underneath shelf size (1600m x 500m x 900m) all made in stainless steel AISI-304. Details of technical data are as per technical specification complete all as specified and directed. |
| 40 | Wash room trolley, capacity-50kg, designed for movement of wet linen within the laundry. The frame of the trolley shall be fabricated out of stainless steel AISI 304 tubes and flats in all welded construction ground smooth & finished, supported on 4 castor wheels minimum 75mm size of swivelling type. The main body of the trolley formed of stainless steel AISI 304 mesh in all welded and constructed complete all as specified and directed. |
| 41 | Dry linen wash room trolley, complete and operational in all respects, capacity-50kg fabricated out of stainless steel AISI-304 tubes and flats in all welded construction ground smooth & finished, supported on swiveling wheels complete all as specified and directed. |
| 42 | Dry linen trolley, capacity-50kg designed and constructed in stainless steel AISI-304 with all welded joints ground & smooth finished tubes and bars, foldable front. The base frame supported on 4 No. castor wheels minimum 75mm size of swivelling type, complete all as specified and directed. |
| 43 | Folding table, size 1200m x 650m x 800m, table top made of polished & finished stainless steel AISI-304, specially designed for carrying out rolling and folding of linen in the laundry. The frame made of stainless steel AISI-304, welded and constructed with one bottom shelf for storage, provided with heavy duty ball bearing for swivelling wheels, complete all as specified and directed. |
| 44 | Storage rack 1200mm x 460mm x 1800mm with 4 shelves; made of stainless steel AISI-304, finished and polished, complete all as specified and directed. |
| 45 | Air compressor, multistage stage, fully automatic suitable for delivering dry compressed air at pressure compatible to presses. Drive - belt driven with pulleys, belts and belt guard motor - 5 HP, 450 Volts, 3 phase, 4 pole, complete all as specified and directed. |
| 46 | Exhaust fans AC single phase 230/ 240V of size 450mm sweep with louver complete all as specified and directed. |
| 47 | Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground ( earth pit not less than 2.25 mtr below normal ground level) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size (32x6)mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead with 15 cm thick alternate layers of charcoal dust & common slat including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron (40x40x5)mm frame, GI medium grade watering pipe 20mm bore and funnel with wire mesh, GI light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and directed. Note:- On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction. |
| 48 | DWC HDPE pipe 100mm inner dia (double wall corrugated) confirming to IS: 14930 (part-II) alongwith necessary snap fit coupler for interconnection suitable for HT/LT cable complete all as specified and directed. |
| 49 | Sheet metal enclosure MCB, distribution board, single pole & neutral, 240 volts, 12 way with 200 amps rated, tinned copper bus bar, double door complete all as specified and directed. |
| 50 | Lt switch gear control panel board 440 Volt, AC 3 phase, 4 wire for outdoor installation \\"KIOSK TYPE\\" with sloping canopy fabricated out of steel sections i.e; CRCA sheet 3.15mm thick, angle/channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 65 standred with phosphatized powder coating painting externally and inernally to protect against corrosion. The panel shall be mounted on suitable size of channel section having ground clearance 60cms from grouting bolts, conforming to IEC 60439 complete duly incorporated and LT panel is mounted on MS angles legs of size (32x32x6)mm frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) including provision of opening for incoming/outgoing cables and having following accessories:- (Contd.../) |
| 51 | (i) Bus bar chamber with electrolytic grade aluminium strip with heat shrinkable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating min 150 Amps (ii) MCCB 4 pole 415 VAC, current rating 400 Amps breaking cap 16 KA at 415 volts= 01 No (Incoming)(iii) MCCB 4 pole 415 VAC, current rating 100 Amps breaking cap 16 KA at 415 volts= 03 No (outgoing). (iv) MCCB 4 pole 415 VAC, current rating 63 Amps breaking cap 16 KA at 415 volts= 06 No (outgoing)(iv) Voltmeter digital type 0-500 V, 96mm square flush panel mounting =01 No ( on incomming supply)(v) Ammeter digital type 0-200 A, with CTs of suitable ratio, 96mm squre flush panel mounting=01 Nos (on main load)(vii) Indication pilot light to operate on direct supply 230 V AC with 2.4 watt bulb (R, Y, G) with smooth lens=03 Nos(iii) On load changeover (manual type) of capacity 100 Amp 4 pole=01 No(ix) Current transformer (bar primary low tension) type CBF-0.6-D1 ratio 100/5, 15VA accuracy class-1 = 01 No (Set of three)(x) Complete wiring of panel board with FRLS PVC insulated multistranded copper conductor cables of suitable current carrying capacity end terminated with lugs and bolts, nuts and washers. Please Enable Macros to View BoQ information |
