|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15cm thickness below or above ground level including removal of debries to outside MD land complete all all as specified and directed. |
| 2 | Dismantling of wall/ floor/dado, hearth or wall tiling or terrazo cement concrete tiling including cement mortar bedding of any thickness (but not backing) including Removal of debries to outside MD land complete all all as specified and directed. |
| 3 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc including Removal of debries to outside MD land complete all all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone walls, celing etc incl racking out joints hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all all as specified and directed. |
| 5 | M&L for brickwork in burnt bricks, modular bricks with Sub class 'B' bricks straight or curved on plan exc 6m can radius ,built in cement mortar 1:4 complete all as specified & directed |
| 6 | M&L for Pre-cast cement concrete block masonry with solid blocks of mix 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates), exceeding 10 cm in width and setting in cement mortar 1:4 complete all all as specified and directed. |
| 7 | M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in coping bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work (straight or curved) complete all all as specified and directed. |
| 8 | M&L for rendering 15 mm thick cement mortar 1:4 over brick work on other than fair faces of brickwork surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for applying two coats of cement base paint on new plastered surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed. |
| 10 | M&L for applying two coats of cement base paint on old decorated surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces cpmplete all as specified and as directed. |
| 11 | M&L for coloured non skid ceramic tiles, 7 to 8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement with pigment to match, as in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L for Glazed ceramic coloured tiles of size 450X300X7mm /600 x300 x7 to 8mm thick as in vertical surfaces such as skirting, dado, etc., , set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar 1:4 complete all all as specified and directed. |
| 13 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 14 | M&L for PCC 1:4:8, type-D2 (using 40 mm graded stone aggregates) as in foundation and filling in mass concrete complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | M&L for PCC 1:4:8, type-D2 (using 40 mm graded stone aggregates) as in foundation and filling in mass concrete complete all as specified and directed. Please Enable Macros to View BoQ information |
