|
| 1 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 2 | S & F Spray duco painted Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be replacemented to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 3 | S & F Spray duco painted Pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be replacemented to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 4 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 5 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed. As approved by Accepting Officer |
| 6 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Accepting Officer(a) Aluminium anodized Butt Hinges 125mm - 3 Nos per leaf(b) Aluminium anodized Tower Bolt 200mm long - 2 Nos per leaf(c) Aluminium anodized Handles 200 mm - 2 Nos per leaf |
| 7 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. |
| 8 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and and plywood face panels, commercial type on both sides complete all as specified and including supply and fixing following items As approved by Accepting Officer :(a) Aluminium anodized Butt Hinges 125mm - 3 Nos per leaf(b) Aluminium anodized Tower Bolt 200mm long - 2 Nos per leaf(c) Aluminium anodized Handles 200 mm - 2 Nos per leaf(d) Aluminium anodized Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Aluminium anodized Floor Door Stooper - 1 No per leaf |
| 9 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR- Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Aluminium anodized Butt Hinges 125mm - 3 nos per leaf(b) Aluminium anodized Tower Bolt 200mm long - 2 nos per leaf(c) Aluminium anodized Handles 200 mm - 2 nos per leaf(d) Aluminium anodized Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Aluminium anodized Floor Door Stooper - 1 nos per leaf |
| 10 | S & F for Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete fixed as in replacement complete all as specified. |
| 11 | Supply and fixing 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete incl S & F fwg items As approved by Accepting Officer.(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 12 | M & L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed. |
| 13 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, replacementing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and as directed.(Note : Hinges shall be measured and paid separately) |
| 14 | Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed. |
| 15 | S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 16 | S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 17 | S&F in replacement stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors, complete all as specified and as directed. and directed. |
| 18 | M&L powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass i.e tempered/ laminated/plain /glazed above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys, hydraulic door closer/floor spring etc complete all as specified and directed approved by accepting officer including taking down of old existing door of any nature and supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 19 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified.including taking down of old existing windows of any naturemode of measurment :-( Clear opening will be measured ) |
| 20 | Providing and fixing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 x 44.45 x 1.29 mm and shutters made of 63.5 x 31.75 x 1.29 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36 mm dia and 1.40 mm aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 2 nos per leaf(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 21 | M&L Powder coated 50 microns extruded aluminium frame for fixed type partition (Standard two panel pattern) made out of powder coated aluminium section of size 63.5 x 38.10 x 1.5mm, comprising of 5mm thick tinted glass inserted in and including necesary jointing cleats, rubber packing, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete incl taking down of existing partition with all fittings and fixtures all as specified and directed. |
| 22 | S & F Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) as in replacement all as specified and directed. |
| 23 | S & F of 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work all as specified and as directed as approved by accepting officer. |
| 24 | S & F in replacement 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work all as specified and as directed as approved by accepting officer. |
| 25 | S & F in replacement 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed as approved by accepting officer. |
| 26 | Supply & fixing in replacement rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site |
| 27 | S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in replacement .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by accepting officer. |
| 28 | S&F in replacement 150mm size aluminium anodized handle complete all as specified and as directed. |
| 29 | M&L in replacement 250mm size aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 30 | S&F in replacement 150mm size Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 31 | S&F in replacement 150mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. |
| 32 | M&L in replacement 250mm size Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 33 | S & F in replacement 6mm thick of size 600x450 looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed as approved by accepting officer. |
| 34 | S & F in replacement Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in replacement complete all as specified. |
| 35 | S & F in replacement mortice lock brass 2 levers vertical type with handle, size 100mm complete all as specified and as directed. Universal / Sandhu / Godrej (ISI Marked) all as specified and directed approved by accepting officer |
| 36 | S & F in replacement mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified and as directed. Universal / Sandhu / Godrej (ISI Marked) all as specified and directed approved by accepting officer |
| 37 | S&F in replacement steel rolling shutters, 1.00mm thickness of laths with out ball bearing,but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete. Note :- Rate including greasing, change of rod, lock, cover hood and other accessories as required as apprived by accepting officer |
| 38 | S & F Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed |
| 39 | S & F Ball bearing for rolling shutters, complete all as specified and directed |
| 40 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, complete all as specified and directed |
| 41 | M & L for painting one coat synthetic enamel paint on steel surface including preparation of old surface of any description , over 10 cm width or girth not otherwise described all as specified and directed |
| 42 | M & L for Seamless calcium silicate ceiling 8mm thick made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including dismantling of old existing boarding of any nature |
| 43 | M &L For false ceiling with 4 mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.60 x 0.60 m consisting of GI angle supported on wall of size 24 mm x 28 mm x 0.7 mm main tee of size 24 mm x 38 mm x 0.7 mm cross tee of size 24 mm x 28 mm x 0.7 mm using porpose made members interlocking to made to shape at 1200 mm c/c fixed with 3mm dia. GI wire suspender and making holes etc. all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of grid work : Armstrong/ swastik/ Techno Grid and 'E' board Gypsum or equivalent approved. including taking down old ceiling etc complete as directed.Note :- The rate quoted by the bidder is including necessary scafolding for the work |
| 44 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified including dismantling of old existing boarding of any nature (colour/pattern as approved by Accepting Officer). |
| 45 | S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 46 | M & L for Cleaning and removing all scale and dirt duly spraying diluted bleaching powder and rubbing with wire brushes etc from tank any type (AC or PVC) and from mouth of circulating pipes etc exc 250 ltr n.exc 500 tlr capacity including write date of cleaning and next due date also with white synthetic enamel paint and complete as specified and directed by Engr-in-Charge. Note :All work under this item will be executed by prior permission of the occupant / concern unit incharge, Also after cleaning tank should be refixed during same day working time only, any damages to float valve will be responsibilty of contractor only. |
| 47 | All as per item No 46.00 here-in-above but exc 500 litre and n.exc 1000 litre capacity. |
| 48 | S & F in replacement Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in replacement complete all as specified and directed. |
| 49 | Supply & Fixing in replacement 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 50 | Supply & Fixing in replacement 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 51 | Supply & Fixing in replacement 25 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 52 | S&F in replacement of Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws.All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided including taking down of old existing boarding of any natureby the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets.Make:-RAJSHRI and equivalent make. |
| 53 | S&F in replacement Prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping on exterior face, fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves complete all as specified and as directed. |
| 54 | S&F for 30mm width of flaps (When open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised. |
| 55 | S&F for 75mm size Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. |
| 56 | S&F for 75 mm size aluminium anodized handle complete all as specified and as directed. |
| 57 | S&F in replacement magnetic cathes and striking plate for cup board etc complete all as specified and dirrected. |
| 58 | Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 59 | M&L for rendering 15mm thick in CM (1:6) on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed. |
| 60 | M&L for wall care putty on wall complete all as specified and as directed. |
| 61 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed. Please Enable Macros to View BoQ information |
