|
| 1 | Electrical Estimate for installation of 120 W High Bay light along with neccessary EI work suitable for newly constructed Badminton Court adjacent to RS hostel under Kalyani University. |
| 2 | Supplying and fixing 415V, 63 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Use for TPNDB)(Make : L&T )Ref:-PWD Page No : D - 1 Item No : 4(a).[TPNDB Incomer and for Load End] |
| 3 | Supply & fixing 415V 100 A capacity MS (16 SWG) Busbar Chamber having dimension of (500x150mm) to be fixed on iron frame on wall consisting of 4 nos copper bars of size (4x15x3 mm). The same BBC should have a separate cubicle at one end consisting 3 nos 100 A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting .[Ref:PWD Page No-D-13,Item 19(b)](For Load End) |
| 4 | Supply & fixing 415V 125 A capacity MS (16 SWG) Busbar Chamber having dimension of (500x150 mm) to be fixed on iron frame on wall consisting of 4 nos copper bars of size (4 x 15x3 mm). The same BBC should have a separate cubicle at one end consisting 3 nos 125 A capacity porcelain cut out fuse unit & one nutral bar to receive the service cable including connecting the cut out fuse units with the BBC by S/F PVC insulated copper wire duly socketed at both ends incl. earthing attachment & painting .(PWD Page No-D-13,Item 19(b)(For Source End) |
| 5 | Supply & fixing 4 way double door horizontal TPN MCB DB with SS enclosure ( Cat no.8GB32202RC04 )(Siemns) concealed in wall after cutting the wall & mending good the damages to original finish with earthing attachment comprising with the following. a) 63 A Four Pole MCB isolator (Siemens) b) 6 to 32 A range SP MCB. (Siemens) ---12 Nos. [Ref:PWD SOR :-Page No-D-6(Item No-7)Page No-D-5,(Item No-6)Page No-D-10(Item No-14) ] |
| 6 | Supplying and fixing Two Pole 240 V MCB 6-32 A of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection with 4 way MCB SS enclosure having IP-20/30 protection, powder coated provision for two/four pole MCB, on wall after making suitable iron frame & mending good the damages to original finish incl. painting, connection & provision for earthing attachment mending good for damages.[Make: Siemens][Ref:PWD SOR Page No-D-9(Item No-11)Page No-D-6,(Item No-7)] |
| 7 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works and also removing rubbises from work site .100 mm x 100 mm x 65 mm (Ref:PWD SOR Page No-E-4,Item No-11( a) |
| 8 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works and also removing rubbises from work site . 150 mm x 100 mm x 65 mm(Ref:PWD SOR Page No-E-4,Item No-11( b) |
| 9 | Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws100 mm x 100 mm x 65 mm (Ref:PWD SOR Page No-E-5,Item No-13( a) |
| 10 | Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws 150 mm x 100 mm x 65 mm(Ref:PWD SOR Page No-E-5,Item No-13( b) |
| 11 | Supplying and fixing 20 mm size PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works.[Ref:PWD Page No-E-16,Item No-7(a)]NB - Should be use Precision make shaddle & the saddles should be fixed at 325mm interval . |
| 12 | Supplying and fixing 25 mm size PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works.[Ref:PWD SOR Page No-E-16,Item No-7(b) ]NB - Should be use Precision make shaddle & the saddles should be fixed at 325mm interval . |
| 13 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaidpolythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages (d1)4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC ( for BBC to TPN DB Building End if required)**NB- Should be maintain colour combination of Circuit Wire (Ref:PWD SOR Page No-E-9 Item No: 1(d1) |
| 14 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaid polythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages (x)4x56/0.3 (4 sqmm) + 2x36/0.3 (2.5 sqmm) as ECC ( for BBC to TPN DB Court End)**NB- Should be maintain colour combination of Circuit Wire (Ref:PWD SOR Page No-E-9 Item No: 1(x) |
| 15 | Supply & drawing 1.1 KV single core stranded 'FR'/'FRLSH PVC insulated & unsheathed copper wire (Make Gloster or Brand approved by EIC) through prelaid polythene pipe and by the prelaid GI fish wire/PVC rigid conduit 'FR' (Precision make) pipe on wall incl. making necy. connection as required & mending good the damages t)2× 2.5 sqmm + 1× 1.5 sqmm.(For Badminton Court Light)**NB- Should be maintain colour combination of Circuit Wire (Ref:PWD SOR Page No-E-9 Item No: 1(s ) |
| 16 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box andmending good the damages to original finish.Average run 5 mtr(Ref:PWD SOR Page No-E-14 Item No: 2(a ) |
| 17 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator (All Anchor Make) & 20A switch type SP MCB (Make Siemens or equivalent Brand approved by EIC) on sheet metal switch board embedded in wall incl. S &F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [Power Board](Ref:PWD SOR Page No-E-7,Item No-26 ) |
| 18 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., includingsupplying sockets, tapes.i) For 2.5 sq mm Copper Wire. [Ref:PWD SOR Page No : F - 5 Item No : 9(i)] |
| 19 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., includingsupplying sockets, tapes.i) For 4 sq mm Copper Wire.[Ref:PWD SOR Page No : F - 5 Item No : 9(ii)] |
| 20 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., includingsupplying sockets, tapes.i) For 6 sq mm Copper Wire.[Ref:PWD SOR Page No : F - 5 Item No : 9(iii)] |
| 21 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.i) For 10 sq mm Copper Wire.[Ref:PWD SOR Page No : F - 5 Item No : 9(iv)] |
| 22 | Supply and Fixing MS Clamp (380x40x6mm)[Ref:PWD SOR Annexure Page No-K-4,Item No-184 ] |
| 23 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.[PWD Page No-C-3 Item no. 20 (a)] |
| 24 | Fixing only 30 cm (12\\") exhaust fan by anti rotating facility system nut bolts after fixed on corrugated coloured alloy steel sheet wall making hole in wall and making good damages and smooth finish etc. as practicable as possible and making a suitable frame of 50mm x 6mm Galv. [Hot Dip] steel strip providing necy. length of PVC insulated wire and making connection for exhaust of following diameter[Ref: PWD SOR Page No-C-4 Item no. 28(b)] |
| 25 | Supply and Delivery 50mm x 6mm Galv. [Hot Dip] steel strip[Ref: PWD SOR Annex-1 Page No-K-3 Item no.134] |
| 26 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick with rubber gasket linning railway type mechanical locking arrangement comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator,(as per office supply Sample)fixed on Tin Shade Structure with fabricated iron frame 40x6 mm flat for Fixing light , having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on Structure, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.All wiring accessories like Saddle. elbow, Circular box 1-4 way as per requirement with top cover, bend/long bend, Tee & reducer etc should be Precision make incase of surface wiring ) Should be used best quality wooden gutkha/PVC gutkha & 35/8 x 1.5 inch wooden screw.iv) PVC rigid conduit Precisiom medium should be used all through wirings ie on ceiling as surface with self drilling screw as mentioned with the support of the tin shaded structure at interval of 325mm [PWD Page No-H-5 Item no. H(5)] |
| 27 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers with Funnel incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below & restoring surface duly rammed by the following-By ISI-Medium 50 mm dia GI pipe (Make Bansal,Jindal)(Ref:PWD SOR Page No-G-1,Item No-2(a)) |
| 28 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.(Ref:PWD SOR Page No-G-2,Item No-4(a)) |
| 29 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles /floor cutting/existing L hook aas required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.(Ref:PWD SOR Page No-G-3,Item No-5(d) |
| 30 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required : 80 mm dia (as per office supply sample)[PWD Page No-F-6 Item no. 11.(f)] |
| 31 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required : 50 mm dia (as per office supply sample)[PWD Page No-F-6 Item no. 11.(d)] |
| 32 | Laying of one No. cable upto 35 sqmm[ 3.5 core 25 Sq mm] in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.For badminton court[(Ref:PWD SOR Page No-F-2 Item No:1(a)] |
| 33 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & FMS saddles with earthing attachment in 10 SWG GI (Hot Dip)Wire, making holes etc. as necy. mending good damages andpainting.[ 3.5 core 25 Sq mm][(Ref:PWD SOR Page No-F-1 Item No:2(a)] |
| 34 | Laying of cable as below 3.5 core 25 Sq mm, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbishFrom 2.5 sqmm to 35 sqmm at an average depth of 75 mm infloor/pavement/wall etc[(Ref:PWD SOR Page No-F-3 Item No:5(i)] |
| 35 | Supplying and fixing 3½ Core 25 sqmm compression type gland (Make:Dowels) complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables a (Ref:PWD SOR Page No-F-4 Item No:7(d) ] |
| 36 | Finishing the end of 3½ Core 25 sqmm XLPE unarmoured cables by crimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials.(PWD SOR Page No-F-5)Item No:8(b) [xiv] |
| 37 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 ofapproved make and brand fitted and fixed as per design as per approval anddirection of Engineer-in-Charge.[Supply and Fixing 12 mm thick water and vermin proof super quality ply wood of size (6 ft x 5 ft) to be fixed on wall with suitable long screws fasterner / on iron structure etc after painting the near side with Japan paint.](PWD civil page no 173 item no 2 Rs. 1709.00/ sq mt) |
| 38 | Supply and delivery of 3.5 core 25 sqmm 1.1 KV grade aluminium XLPE Sheathed Armoured Aluminium Power Cable. (Make- Gloster )[For Badminton Court Power]( Ref:Non Schedule Item ) |
| 39 | Supply and Delivery 120 W LED High Bay Light with IP 67 Protection having 2-5700K-Powder Coating-Graphite Grey-Polycarbonate Optical Lens-2 x 60W Operating Voltage-100-277 Vac-342 x 135 x 325- Warranty 5 Years- Beam angle-25° / 40° / 60°Make:- (K LITE ID-3099 POLAR HIGH BAY 2)( Ref:Non Schedule Items ) |
| 40 | Supply and delivery of 300 mm sweep(12''), single phase, 240 Volt, 50 Hz Ac,1420 rpm,80W Heavy duty Exhaust Fan including all accessories. (Make- EPC )( Ref:Non Schedule Items ) |
| 41 | 18% GST |
| 42 | 1% CESS Please Enable Macros to View BoQ information |
