|
| 1 | M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft loose soil complete all as specified and as directed. |
| 2 | M&L for excavating in trenches n.exc 1.50m wide and n.exc 1.5m in depths for foundations and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | M&L for returning filling in soft/loose soil including spreading leveling watering and well ramming in layers not exc 25cm thick complete all as specified and as directed. (filling of trench from where LT cable taken & filling for new location of LT cable) |
| 4 | M&L for removing excavated material exc. 50m and depositing where directed at a level in exc. 1.5 m above the starting point complete all as specified and as directed. |
| 5 | M&L for earth filling in floors etc., spreading and leveling in layers not exceeding 25cm thick, well ramming including watering as required complete all as specified and as directed. |
| 6 | M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded aggregate in foundations filling and mass concrete complete all as specified and as directed. |
| 7 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified and as directed. |
| 8 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:6 complete all as specified and as directed. |
| 9 | M&L for 75mm thick 1:3:6 type C-2 (using 20mm graded aggregate) as in plinth protection/ finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 10 | Use and waste of formwork to sides and soffits of floor or roof beams; beam hunching; lintels and like for rough finished surfaces complete all as specified and as directed. |
| 11 | Use and waste of formwork to soffits of suspended slabs such as roof slab, floor slabs, landing and similar works not exceeding 200mm thick (Horizontal, sloping) for flat & rough finished surface of concrete complete all as specified and as directed. |
| 12 | Use and waste of formwork to sides of columns and like for rough finished surfaces complete all as specified and as directed. |
| 13 | M&L for formwork to edges of concrete flats treads, breaks in floors, window sill concrete railing opening in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls horizontal or slopping and similar work exc 10cm but n.exc 20cm wide for flat & rough finished surface of concrete complete all as specified and as directed. |
| 14 | S&F mild steel TMT bars 10mm dia and over, cut to length bend to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and clips complete all as specified and as directed. |
| 15 | All as per Srl item No 14 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 16 | M&L for reinforced cement concrete M-25 (Design Mix) as in Foundation, Incl rafts, footings, foundation beams, Plinth beams, bases for columns etc basement slab complete all as specified and as directed. |
| 17 | M&L for reinforced cement concrete M-25 (Design Mix) as in columns, pillars, piers, post struts complete all as specified and as directed. |
| 18 | M&L for reinforced cement concrete M-25 (Design Mix) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies complete all as specified and as directed. |
| 19 | M&L for Reinforced Cement Concrete M-25 (Design mix) as roof beam beam, GB, Lintel beam complete all as specified and as directed. |
| 20 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for rendering 15 mm thick in cement plaster in cement mortar (1:4) mixed with integral water proofing compound finished even and fair without using extra cement complete all as specified and as directed. |
| 22 | M&L for rendering 5 mm thick in cement plaster in cement mortar (1:3) on ceiling surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for three coat of white wash on newly plastered surface of wall including preparation of wall surface complete all as specified and as directed. |
| 24 | M&L for three coat of white wash on newly plastered surface of ceiling including preparation of ceiling surface complete all as specified and as directed. |
| 25 | M&L for preparation of newly plastered or unplastered surface of wall surface and applying two coat of cement base paint over one coat of primer complete all as specified and as directed. |
| 26 | M&L for 25 mm thick damp proof course in Cement concrete (1:2:4) Type B-0 including necessary formwork complete all as specified and as directed. |
| 27 | M&L for hardcore of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 28 | M&L for 100mm thick plain cement concrete 1:4:8 Type D2 (using 40mm graded aggregate) as in sub base of flooring complete all as specified and as directed. |
| 29 | M&L for 25mm thick plain cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) to receive the top layer of tiles complete all as specified and as directed. |
| 30 | M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and incl 15mm thick bedding layer CM 1:6 in complete all as specified |
| 31 | M&L for coloured glazed tiles of size 450x350x6 - 7mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 32 | S&F 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 33 | S&F 75 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 34 | S&F PVC (SWR) bends 110 mm complete all as specified and as directed. |
| 35 | S&F PVC (SWR) bends 75 mm complete all as specified and as directed. |
| 36 | S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed. |
| 37 | M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement. Diameter of outlet in 75 mm) complete all as specified including taking out damaged floor trap in any type and position complete all as specified and as directed. |
| 38 | S&F 150mm dia gully trap setting and jointing with cement joint complete all as specified and as directed. |
| 39 | S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete all as specified and as directed. |
| 40 | S&F pipe galvanized 20 mm bore, “Medium grade”, including reqd fittings like socket, union, elbow, bend, tees etc. jointed and laid in trenches complete all as specified and as directed. by Engr-in-charge |
| 41 | S&F pipe galvanized 25 mm bore, “Medium grade”, including reqd fittings like socket, union, elbow, bend, tees etc. jointed and laid in trenches complete all as specified and as directed. by Engr-in-charge |
| 42 | S&F squatting pan WC orissa pattern size 580 x 440 mm white with integral foot complete all as specified and as directed. |
| 43 | S&F Vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern) incl seat cover and flushing pipe for pedestal pipe etc. complete all as specified and as directed. |
| 44 | S&F Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe all as specified and as directed. by Engineer - in - Charge |
| 45 | S&F vitreous china Urinal, full stall type white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of urinal spreader, flush pipe, grating with waste coupling, and union for discharge pipe, waste pipe ,spreader all as specified and approved quality and as directed. by Engr-in-Charge |
| 46 | S&F PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brackets complete all as specified and as directed. |
| 47 | S&F PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete fixed in repair complete all as specified and as directed. |
| 48 | S&F health faucet (ABS body)mild steel chromium plated suitable for 15mmdia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 49 | S&F Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified |
| 50 | S&F Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specified and as directed. |
| 51 | S&F 1000 ltr UV protected antimicrobial triple layer white colour rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position complete all as specified.Make :- Sintex/ Rotex/ Sheetal. |
| 52 | S&F 20mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and as directed. |
| 53 | S&F Pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted hot or cold screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 54 | S&F brass chromium plated shower rose of 125mm size, with or without swivel complete all as specified and as directed. |
| 55 | S&F Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 56 | S&F Stop valve, 15 mm cast copper alloy chromium plated fancy type complete all as specified and as directed. |
| 57 | S&F 15mm angle stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and complete all as specified and as directed. |
| 58 | S&F Bib tap cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed. |
| 59 | S&F 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. by Engineer - in - Charge |
| 60 | S&F 18 to 20mm thick granite (of any type) tiles machine cut , in skirting/dado laid over cement screed 10 mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 61 | S&F steel ventilator 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed and gauzed skelton shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWRR box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window including following fittings welded to failed shutters (Hold fasts 150 mm long of 12 mm x 3 mm made to shape-04 nos per window. (b) Handle of Z sec 20 mm x 25 mm, 100 mm long-1 Nos of leaf (c) MS tower bolt 150 mm long 02 Nos per leaf. (d) Z sec 20 mm x 25 mm , 100 long of hollow square 15 mm x 20 mm x 63 mm welded to hinges – 01 Nos per leaf (f) MS pintal hinges of size 75mm x 12 mm -02 Nos per lear (g Fabrication and fixing arrangement as per drawing No CEJZ/TD -06/07 . Note Glass and painting shall be measured and paid separately under appropriate items |
| 62 | Ditto all as per srl item No 61 above, but in gauzed shutters without sash bars |
| 63 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed. |
| 64 | M&L for 3 mm thick plain figure glass, pin headed type and fixing and glazing with in oil putty in square n.exc .5 sqm in each pane complete all as specified and as directed. |
| 65 | S&F Factory Made Solid PVC Moulded Door Shutters with particle board core complete all as specified and as directed. |
| 66 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing |
| 67 | S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing |
| 68 | S&F 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified and as directed. |
| 69 | S&F aluminium anodised tower bolts 200 mm size fixed with machine screws complete all as specified and as directed. |
| 70 | S&F aluminium anodised Bow Handles 150 mm size fixed with machine screws complete all as specified and as directed. |
| 71 | M&L for Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified |
| 72 | S&F 250mm long aluminium alloy anodised sliding door bolts with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. |
| 73 | S&F Gun-metal, globe or gate valves of 20mm, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed. |
| 74 | M&L for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and as directed. by Engineer-in -Charge |
| 75 | M&L for 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc all as specified and as directed. by Engr-in-Charge |
| 76 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrete / general purpose grout as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight complete all as specified and as directed. |
| 77 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane based cold applied of spray/brush applied, with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator \\" complete all as specified and as directed. |
| 78 | M&L for laying 60 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and pigment including demolition of old paver blocks complete all as specified and as directed. NOTE: The sample shall be got approved from the GE before build procurement and lots shall be got tested indecently by the GE |
| 79 | M&L for 30mm sand cushion, filling 30mm under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 80 | M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in sub base of flooring complete all as specified and as directed. |
| 81 | M&L for cutting existing GI tubing of size 25 to 32mm dia in position at two sections for taking new connection including making thread on pipe in position, inserting new Tee provision and fixing of union complete jointing the cut pipe complete all as specified and as directed. by Engineer-in -Charge |
| 82 | Supply only integral water proofing compound all as specified and as directed. |
| 83 | S&F CP grating 125mm dia with centre hole all as specified and as directed. by Engr-in-Charge |
| 84 | M&L for Reinforced concrete pipes 150mm Dia of pipe, class NP 2 with one collar per length of pipe complete all as specified and as directed |
| 85 | M&L for Concrete bed 1:4:8 Type D-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 86 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed. |
| 87 | M&L for precast cement concrete 1:2:4 using 20 mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 88 | M&L for point wiring for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge. |
| 89 | Ditto all as per srl item No. 88 above, but for one fan point controlled by one switch complete all as specified. |
| 90 | Ditto all as per srl item No. 88 above, but for one socket outlet 5 Amps on independent board complete all as specified. |
| 91 | Ditto all as per srl item No. 88 above, but for one socket outlet 5 Amps on the same board controlled complete all as specified. |
| 92 | Ditto all as per srl item No. 88 here in before, but with 2.5 Sqmm (nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and as directed. by Engineer-in-Charge. |
| 93 | M&L for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4.0 Sqmm drawn through in and including new PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity single wire FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface complete all as specified. NOTE: Two run of 4.0 sqmm wire and one run of 4.0 sqmm wire as earth wire including PVC conduit shall be measured as one unit. |
| 94 | S&F switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 95 | S&F switch piano flush type 16 Amps single pole, one way complete all as specified. |
| 96 | S&F socket out let 5/6 Amp, 5 pin flush type complete all as specified. |
| 97 | S&F Socket outlet multi purpose 2 in 1, 5/6 pin, 5 & 16 Amps, flush type complete all as specified. |
| 98 | S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified. |
| 99 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with matching colour back plate all as specified and as directed. |
| 100 | S&F LED lights fitting 1x 20 Watt, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified |
| 101 | S&F LED light fitting mirror type with high output diffuser 9/10 watt 220 V AC decorative type including connecting up with three core flexible copper conductor cable of suitable size complete all as specified |
| 102 | S&F energy efficient LED Bldg security light fitting of 35W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and as directed. by Engineer-in-Charge :-(a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt.(b) Input Voltage range : 140 to 270 volts(c) Temp operating range : Minus 10°C to Plus 50°C(d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. |
| 103 | (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)(q)LED source : Hi power LED 3 to 5W High power type |
| 104 | M&L for sheet metal DB for MCBs, SPN, 8 ways, double door, single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrand/ Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells or equivalent in Hager/ Siemens/ Bch |
| 105 | M&L in replacement sheet metal DB for MCBs, SPN, 4 ways, double door, single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified |
| 106 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 amp 240 V 10 KA complete all as specified and as directed. Make : Benlo/ Indoasian/ L&T/ Havells/ ABB |
| 107 | S&F MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per complete all as specified and as directed. by Engr-in-charge |
| 108 | S&F MCB SPN 32 Amps, 10 KA, B curve all as specified and as directed. by Engr-in-charge |
| 109 | S&F MCB SPN 40 Amps, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider or equivalent in Optipro of Indoasian/ Havells/ Siemens/ Bch. complete all as specified and as directed. by Engr-in-Charge |
| 110 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers (louvers made of powder coated frame having aluminium/ GI sheet flappers) complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering complete all as specified and as directed. |
| 111 | M&L for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar 1.3 or cement concrete 1:2:4 Type B-1 as required complete all as specified |
| 112 | M&L for XLPE insulated, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete laid in trenches passing through pipes/culverts/ under roads/ along wall complete all as specified and as directed. by Engineer-in-charge |
| 113 | S&F 1100 volts grade heavy duty service cable with PVC insulated aluminium conductor served with an inner sheathed of PVC tape armoured with galvanised steel wire for hanging and overall PVC sheathed 6 Sqmm 2 core nominal cross section in service connection complete all as specified and as directed. (Rates are inclusive of jointing materials, labours, GI wire, spacing porcelain insulators, service shackle insulator both on service pole and service bracket with iron fixing accessories, GI pole ,pole clamps complete) |
| 114 | Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, compressive strength of brick shall not be less than 160 kg/cm² adjacent/abutting each other complete all as specified and as directed. by Engineer-in-Charge |
| 115 | M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified (punned down thickness of 18 cm will be measured |
| 116 | S&F GI pipe light grade ISI Marked of size 25 mm dia bore for cable protection under road/floor/wall along the pole including fittings complete all as specified and as directed. by Engr-in-Charge. Make : TATA/ Jindal/ Ravindra |
| 117 | M&L for cutting of existing PCC surface any type for laying cables/pipes of size 150mm width and upto 150mm depth complete including making good to disturbed surfaces complete all as specified |
| 118 | M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and as directed. and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50m away from on the earth pit electrode and pipe for watering shall be provided in slanting manner Please Enable Macros to View BoQ information |
