|
| 1 | High Mast 12.5 Mtr. At old Sabji Mandi Chowk |
| 2 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 3 | Overall size 1.5sq.mm (48/0.20mm), 3Core |
| 4 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): |
| 5 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 6 | Overall size 6sq.mm (2Core) Un-armoured (Loose) |
| 7 | G.I. EARTHING: |
| 8 | Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). |
| 9 | Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) |
| 10 | COPPER EARTHING (Upto 8 metre in Length): |
| 11 | Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50 metre (14.76 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- |
| 12 | Earthing with 20mm x 3mm Copper Tape (upto 8Metre in Length) |
| 13 | Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 14 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 15 | Supply & Erection of 12.5mtr high mast system (as per Indian Standard CODE IS :875 :1987 (Part-II), 12.5 Mtr. High Mast System Mast shaft shall be in 2 sections, with hot dip Galvanized, There shall be no circumferential weld. It shall also include accessories for high mast including head frame, 3 point suspension system with steel wire rope 6 mm dia., double drum winch, Power Tool, Cable, Galvanized Lantern carriage arrangement suitable for 8 Luminaries. Bottom Dia.- 360mm, Top Dia.-150mm, Sheet Thk- 3.3mm. and Foundation bolts manufactured from special steel along with nuts, washers, anchor plates & templates and foundation bolts manufactured from special steel along with nuts, washer, anchor plates & templates for 16m High Mast. Automatic control panel fabricated with 16 SWG CRCA sheet outdoor type with 25A Contactor 63A MCCB 24 Hr. Timer & Reverse/Forwarded Switch. High Mast polygonal structure as per wind speed of 180 km per hour tested from IIT, with wind tunnel testing single hot dip galvanizing for maintenance life of minimum 25 years, with all the other exposed parts high tensile sheet steel conforming to BSEN-10025 with tensile strength 355 N/Sqm without latching arrangements head frame galvanized lantern. Luminaire wiring material not included in the mast supply price Specifications high mast 12.5 mtr, material construction ASTMA572 Grade 50/ BSEN-10025 S355 complete in all respect as per satisfaction of Engineer Incharge of the work. |
| 16 | Supply and erection of LED Flood Light 200 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 17 | Mini Mast at Ward no. 85 Halka Central |
| 18 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 19 | Overall size 1.5sq.mm (48/0.20mm), 3Core |
| 20 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): |
| 21 | Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- |
| 22 | Overall size 6sq.mm (2Core) Un-armoured (Loose) |
| 23 | G.I. EARTHING: |
| 24 | Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). |
| 25 | Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) |
| 26 | MINIATURE CIRCUIT BREAKERS: |
| 27 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 28 | MCB Single Pole 0.5-4amp. (10kA, Curve-C) |
| 29 | TIMER: |
| 30 | S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer-in-charge:- |
| 31 | Street Light Controller (For Single Phase Circuit) with 1 No. Three Pole Power Contactor 40A, 1 No. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 1 No. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) |
| 32 | Supply and Erection of G.I. Pipe 40mm dia 4mm thick round bracket to make a ring of 5 ft Dia with 3 Nos. inclined member Triangular Shape 3’ feet long welded with MS canopy 80mm inner Dia. 88mm outer Dia, 450 mm long. including aluminium paint etc. complete in all respect as per satisfaction of Engineer-in-charge:- |
| 33 | 3-STEPPED STEEL TUBULAR POLE (WITH PRE-CAST FOUNDATION): |
| 34 | Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP-Mpa) of suitable length • confirming to IS: 2713- (PART-I1)-1980 (Steel tubes • confirming to IS: 1161-1979, UTS 42 kgf/Sq.mm) to fix on precast RCC column of suitable dimensions. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangement for housing three phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation boils. The steel tubular pole shall be bolted on a pre-cast foundation with a set of four foundation bolts for greater rigidity. The foundation shalt be erected over cement concrete M20 with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth below ground level including painting of pole with two coats of approved aluminium paint as required:- |
| 35 | Overall length 7 metre, length of sections 4 metre. 1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.5mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg. (410 SP-2). Foundation size below G/L 550mm x 550mm it 1400mm, 4Nos. Foundation Bolts size 20mm dia., Lengt>700mm with Base Plate Dimensions 240mm it 240mm x 16mm Thick (approx. weight 7.235 kg.) |
| 36 | Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- |
| 37 | Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) |
| 38 | CUBICAL PEDESTAL: |
| 39 | Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4\\" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:- |
| 40 | Cubical Size 900mm high, 600mm wide and 350mm deep with platform dimensions 700mm x 450mm x 450mm |
| 41 | Supply and erection of LED Flood Light 100 watt, AC supply voltage 140-270 volts, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded luminium housing with control gear (IP 66 protection), THD<10%, CRI inimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No: AT/2021/GL/1410-1422 Dated: 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. . Please Enable Macros to View BoQ information |
