|
| 1 | [24.13.19]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 19. 16 Sq mm 2 core (UnArm.) |
| 2 | [24.13.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) |
| 3 | [24.4.9.1]STREET LIGHT 9.1. Erection of High mast ( Labour only) on existing CC foundation ( foundation to be paid separately and foundation bolt shall be provided) 12 to 15 metre High mast |
| 4 | [24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia |
| 5 | Dismantlement of High mast ( Labour only) on existing CC foundation ( foundation to be paid separately and foundation bolt shall be provided) 12 to 15 metre High mast. |
| 6 | S/E and Erection of ACSR PVC Insulated Conductor 30 Sqmm (confirming to IS 398(PART-II)-1976 -1996,4826-1976 , IS: 1521-1972 and IS:1778-1980 with latest amendments and the erection of the same with accessories including stringing and sagging of conductor as well as jointing and binding with insulator at spots complete in all respect up to the entire satisfaction of the engineer –in - charge. |
| 7 | S/E of 150 Watt LED Flood light luminaries of with multiple LED with highly efficient high power LED light with lens, pressure die cast aluminum housing, reflector and enclosed with toughened glass, IP-66 level as per specification attached. (With 3 years free replacement warranty at site including labour charges free of cost). (Make: Philips/Bajaj/LT/Panasonic) (Excluding GST}erection of the same at site complete in all respect upto the entire satisfaction of Engineer-In-Charge. |
| 8 | Supply and Erection of 70/72 Watt Street light luminaire with multiple LED with lighting efficient with power LED light with lens pressure die cast aluminum housing, reflector and enclosed with polycarbonate/ toughened glass, IP-66 level, having light efficiency of 120 lumens / watt up to the entire satisfaction of Engineer-in-charge of the work (with 3 year free replacement warranty, mtc. including labour charges, free of cost) Make Phillips/Bajaj/LT /Panasonic |
| 9 | Supply and Erection of L.T. spacer (Poly Poline type) 4 wire line spacer on the existing L.T. line including the cost of all labour required to complete the job in all respect upto the entire satisfaction of Engineer-In-Charge). |
| 10 | Supply, Erection and Transportation up to site including all taxes as per latest Govt. Instruction amended time again of Prestressed cement concrete pole as per IS: 1678/1960. 9 Mtr. Long 105mm x 115mm at top and 105mm x 315m at bottom with working load of 200kg. Buried 1.80 min ground or as per UHBVNL specification complete in all respect up to the entire satisfaction of Engineer-in-Charge(Ex-GST 18%). |
| 11 | Supply, Installation Testing and Commissioning of LED Street Light Fixture with Wattage range of (45 Watt) with body made of High Pressure Single Piece Die Cast Aluminum Alloy and cover made of PMMA (polymethymethacrylate) having system Lumen)120Ipw with inbuilt Protection against Short Circuit, Miswiring, Over Voltage and Surage Protection of 6 KV. The IP of fixture and Driver Compartment should be IP66 and same for the LED Compartment. The driving current should be ( 700mA with THD ( 5% and PF ). 90 and Operating Voltage between 120-270V and CRI ) 70 and Impact Resistance of IK)05. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect) (Including Three Years replacement warranty and three years Free Mtc./Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. (Make: Bajaj / Philips / LT/Panasonic or equivalent make approved in HSVP). Please Enable Macros to View BoQ information |
