|
| 1 | P/F of suitable size door which shall be made with 40 mm thick puff panel having density of 36+2 kg/m3 sandwiched panel cladded with PPGI sheet of minimum thickness of 0.5 mm on both sides, The door shutter shall be provided with 01 nos. SS aldrop(250mm) outside, 01 no.SS Tower bolt(150mm) at the centre inside and SS handles (150mm) shall be provided on both sides and SS twin cloth hook inside at the door i/c dismantling of damaged dorr etc as reqd.(MR) |
| 2 | P/F of suitable size puff panel shall be made with 40 mm thick puff having having density of 36+2 kg/m3 sandwiched panel cladded with PPGI sheet of minimum thickness of 0.5 mm on both sides for proper joining with lower/upper portion of the wall/dooretc. by bracing and other joinary material of 0.5 mm PPGI flashing etc. as reqd abd i/c desmantling cutting portion of wall /door etc as reqd(MR) |
| 3 | Repairing of PPGI PUF insulated roof by bracing and other joinary materials etc., 0.5mm PPGI flashing U chanel and upper &bottom portion of roof as required .(MR). |
| 4 | Replacement of 40mm, thick Puf Insulated cladded with 0.5 mm both side PPGI sheet cubicle wall 1m x 2m i/ c all joinary materialscomplete ctc as regd (MR) |
| 5 | P/F of Stainless steel handle 150 mm on the door with complete fitting etc as reqd (MR). |
| 6 | P/F of stainless steel twin cloth Hook inside the door with complete fitting etc as reqd.(MR) |
| 7 | P/F of acrylic corner inside the cubicle etc as reqd.(MR) |
| 8 | P/F of 150 mm Tower bolt made of Stainless Steel inside the cubicle door at center of door inner side etc as reqd (MR). |
| 9 | P/F of L-Drop/sliding door bolt 250 mm Stainless Steel outside the door with complete fittings etc as reqd.(MR) |
| 10 | P/F of door Hingess (4\\") made of stainless Steel in door and also removing of existing M.S/SS damaged hinges, etc as reqd.(MR) |
| 11 | Repairing of PPGI PUF panel doors of toilet cubicle by 0.5mm PPGI C chanel, Z flashing and other joinary materials wih proper POP riviting etc as reqd.(MR) |
| 12 | P/F of stainless steel 15'' grab bar inside the cubicle wall with complete fiting etc as reqd. |
| 13 | Cleaning of cubicles by engaging the sweeper/unskilled labour with raw material of cleaning etc as required.(MR) |
| 14 | Providing and fixing of white colour plane FRP sheet of 2mm thickness on cubicle rusted wall/door/flap and fixed with0.5mm suitable PPGI angles/chanel in each cubicle with proper POP riviting and all sides of FRP sheets must be sealed with silicon sealent etc as reqd (MR) |
| 15 | P/F of white colour FRP Chequerd plate white colour jalcoated havinf 5 mm thickness integrated in builtup cubicle floor with att sides colier (3\\") in FRP sheet, FRP sheet must be on (Dehri) in entry point on base floor of cubicle and fixing by resin putty silicon sealent, PPGI bracing, POP revitting etc in each cubicle and also fixing of existing orissa pan with FRP chequered plate to make water leak proof by suitable matrials.i.e silicon sealent, resin putty/FRP moulding etc as read (MR) |
| 16 | P/F of FRP WC squating pan, foot rest of 5 mm thickness integrated inbuilt up size 920mm X 920mm approximately complete with footrest & 3 \\" skirting double coating of GP jal coated white Pigment complete in one piece with proper water slope into Pan from all sides and also fixing 01 layer of 450GSM WR (Woven Roving) mat with FRP WC squating pan, etc in cubicle at site etc as reqd(MR). |
| 17 | Replacement of FRP suitable size door of 35mm thick made of FRP GP jalcoated pigment colour golden brown and green inner siode or as approved by engineer incharge .The door shutter shall be provided with 01 No aldrop(200mm) at outside 01 no.SS Tower bolt(150mm) at the centre inside and SS handles (150mm) shall be provided on both sides and SS twin cloth hook inside at the door with 100 mm hinges 4 No at each door as reqd. i/c dismantling of damaged dorr etc as reqd.(MR) |
| 18 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete etc as reqd.(civil DSR-2016,10.1) |
| 19 | P/F of PTMT ,1 no. Push cock of approved quality and colour .15 mm nominal bore, 80 mm long,wieghting not less than 46 gms . (civil DSR 2023,18.57.2) |
| 20 | Add cost index on DSR ITEMS Civil DSR 2023 @ 3 % |
| 21 | Less rebate for damaged dismantle materials. Please Enable Macros to View BoQ information |
