|
| 1 | E/M PORTION (CODE HEAD-01/480/00) |
| 2 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out / laying of under ground cable,pole or stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath / pavments etc complete as specified and as directed. |
| 3 | Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured). |
| 4 | Supply and lay in trenches brick, common burnt in clay, building brick, sub class 'B' designation 75 for cable protection complete as specified and as directed. |
| 5 | Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete as specified and as directed. |
| 6 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete as specified and as directed. |
| 7 | Supply, laying / fixing / connecting, testing and commissioning in replacement of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete as specified and as directed for the following sizes of cable. |
| 8 | 16 Sqmm x 4 core |
| 9 | 25 Sqmm x 4 core |
| 10 | M&L for parallal boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe etc complete all as specified and directed. |
| 11 | Supply and fixing in replacement for GI protection pipe light grade for cable protection incl all fittings laid in trenches or fixed on pole/walls with mild steel clamps, bolts, nuts and washers complete as specified and as directed for 50mm dia. NOTE : Earth work reqd shall be measured and paid separately. |
| 12 | M&L for painting of erected steel tubular swaged poles of LT over head line ( Except embedded portion), 8.5/9 M long complete including all MS work mounted on pole , earth protection & water pipe ( if exists) with two coat of aluminium paint after necessary preparation and numbering of poles with white synthetic enamel paint on black ground complete as specified and as directed. |
| 13 | Supply fixing as in repair steel tubular swaged pole 9.00m long Type -410 SP-31 conforming to IS-2713 part I to III 1980 with and including cast iron base plate, finial taper plug,nuts, bolts and washers etc. and fixed into plain cement concrete foundation duely painted with two coats of aluminium paint over one coat of red oxide primer including preparetion of surfaces and making strip 150mm wide upto 1.50m (above PCC coping) by black, yellow paint in alternate layers and pole nos. including dismantling of old poles of any description including demolition of concrete foundation complete all as specified and directed. NOTE: (i) Earth work, cement concrete will be measured and paid seperately. (ii) All other accessories and work shall deemed to be included in the quoted unit rate. |
| 14 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation of pole/ stay/ angle/ pipe complete as specified and as directed. |
| 15 | M&L for PCC 1:2:4 type C2 using 20mm graded for padestal coping including necessary form work finished fair using extra complete as specified and as directed. |
| 16 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate for foundation of pole/ stay/ angle/ pipe complete all as specified and directed. |
| 17 | Supply and fixing in replacement PVC insulated and PVC round sheathed, copper conductor industrial cable (confirming to IS 694:2010) 1.5 sqmm, double core of copper conductor for connection of street light/Flood light / post top lanterns/garden lights etc. fittings on pole / wall / pillar from over head conductor / junction box / DB including termination clip etc complete in all respect including through GI tubing of size 15mm/20mm dia complete as specified and as directed. |
| 18 | Supply and fixing in replacement PVC insulated and PVC round sheathed, copper conductor industrial cable 2.5 sqmm, double core of copper conductor for connection of street light/Flood light / post top lanterns/garden lights etc. fittings on pole / wall / pillar from over head conductor / junction box / DB including termination clip etc complete in all respect including through GI tubing of size 15mm/20mm dia complete as specified and as directed. |
| 19 | Supply and fixing LED street light 120 W,with lumen 110 per watt, silicon potted gel driver with BIS approved drivernew generation energy saving and environmental friendly long life LED street light made up of pressuredie cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device suitable for mounting for pole etc complete including taking down of old unserviceable fitting of any type, make or wattage complete as specified and as directed. |
| 20 | Supply and fixing LED street light 90 W,with lumen 110 per watt, silicon potted gel driver with BIS approved drivernew generation energy saving and environmental friendly long life LED street light made up of pressuredie cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device suitable for mounting for pole etc complete including taking down of old unserviceable fitting of any type, make or wattage complete as specified and as directed. |
| 21 | Supply and fixing LED street light 60 W,with lumen 110 per watt, silicon potted gel driver with BIS approved driver new generation energy saving and environmental friendly long life LED street light made up of pressuredie cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device suitable for mounting for pole etc complete including taking down of old unserviceable fitting of any type, make or wattage complete as specified and as directed. |
| 22 | Supply and fixing LED street light 35 W,with lumen 110 per watt, silicon potted gel driver with BIS approved driver new generation energy saving and environmental friendly long life LED street light made up of pressuredie cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device suitable for mounting for pole etc complete including taking down of old unserviceable fitting of any type, make or wattage complete as specified and as directed. |
| 23 | Supply and fixing LED Flood light 210 W with lumen 110 per watt, silicon potted gel driver with BIS approved driver, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting with high power LEDs as light source complete including taking down of old unserviceable fitting of any type, make or wattage and keeping in safe custody for disposal complete as specified and as directed. Note - The bracket of required size as per manufacturer instructions for flood light is deemed to be included in coated unit rate. |
| 24 | Supply and fixing LED Post top lantern of 20 Watt IP65 new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source and accessories such as pre-wired etc suitable for gate light pipe including taking down of old unserviceable post top lantern complete as specified and as directed. |
| 25 | Supply and fixing in replacement Cable Junction Boxes IP 66 “halogen free and weather proof” for outdoor installation (with metric knockouts for cable entry - Black Colour) size 200 x 160 x 98 mm all as per cat no KF 5255 suitable for 16/25 sq.mm of make Hensel fixed to pole /wall with suitable FI clamp 20X3 mm nuts , bolts and washers incl provision of 01 No miniature circuit breaker (MCBs) single pole , 240 volts 10 KA 6 Amps and incl suitable capacity aluminium bus bar , complete all as specified and as directed. |
| 26 | Repair and Servicing of Diesel Engine Make: Kirlosker, Model No EA-20 directly coupled with alternator of 15 KVA capacity, draining out the existing engine oil from the bottom of the oil sump and checking the entire serviceablity system of DG set testing and commissioning the same including charging of alternator at site and control panel wiring/connection correction complete all as specified and as directed. Note: New Spares as required shall be measured and paid separately \\"as supply only\\" under followings items and the work of maintenance shall be carried out through manufacturer or their authorised dealer only :- |
| 27 | Supply only Air filter element (Primary and Secondary) |
| 28 | Supply only Fan belt |
| 29 | Supply only Fuel Filter (Primary and Secondary) |
| 30 | Supply only Lub Oil Filter |
| 31 | Supply only Fuel pipe |
| 32 | Supply only AVR 3 phase 15 KVA DG Set |
| 33 | Repair and Servicing of Diesel Engine Make: Kirlosker, Model No (Kirloskar Green EA-20) directly coupled with alternator of 20 KVA capacity, draining out the existing engine oil from the bottom of the oil sump and checking the entire serviceablity system of DG set testing and commissioning the same including charging of alternator at site and control panel wiring/connection correction complete all as specified and as directed. Note: New Spares as required shall be measured and paid separately \\"as supply only\\" under followings items and the work of maintenance shall be carried out through manufacturer or their authorised dealer only :- |
| 34 | Supply only Air filter element (Primary and Secondary) |
| 35 | Supply only Fan belt |
| 36 | Supply only Fuel Filter r (Primary and Secondary) |
| 37 | Lub Oil Filter |
| 38 | Supply only fuel pipe |
| 39 | Supply only AVR 3 phase 20 KVA DG Set |
| 40 | Repair and Servicing of Diesel Engine Make: Greaves Ltd, Model No (3YWAK) directly coupled with alternator of 25KVA capacity, draining out the existing engine oil from the bottom of the oil sump and checking the entire serviceablity system of DG set testing and commissioning the same including charging of alternator at site complete all as specified and as directed. Note: New Spares as required shall be measured and paid separately \\"as supply only\\" under followings items and the work of maintenance shall be carried out through manufacturer or their authorised dealer only :- |
| 41 | Supply only Air filter element (Primary and Secondary) |
| 42 | Supply only Fan belt |
| 43 | Supply only Fuel Filter (Primary and Secondary) |
| 44 | Lub Oil Filter |
| 45 | Supply only fuel pipe |
| 46 | Supply only AVR 3 phase 25 KVA DG Set |
| 47 | Repair and Servicing of Diesel Engine Make : Kirlosker Bliss (Eng Ser No ZKR3A0141AB02A-002), directly coupled with alternator of 140 KVA capacity, draining out the existing engine oil from the bottom of the oil sump and checking the entire serviceablity system of DG set testing and commissioning the same at site complete all as specified and as directed. Note: New Spares as required shall be measured and paid separately \\"as supply only\\" under followings items and the work of maintenance shall be carried out through manufacturer or their authorised dealer only :- |
| 48 | Supply only Air filter complete(Primary and Secondary) |
| 49 | Supply only Fan belt |
| 50 | Supply only Fuel Filter (Primary and Secondary) |
| 51 | Supply only Lub Oil Filter |
| 52 | Supply only fuel pipe |
| 53 | Supply only AVR 3 phase140 KVA DG Set |
| 54 | Disconnecting and taking down carefully defective self starter of 24 volt capacity of 140 KVA DG Sets duly disconnecting all electrical cable connections and mechanical supports, transport the same to civil authorised work shop and dismantling and opening into parts of self starter for assess the defects and damaged parts and rectifying the defects by changing the defective spares including testing the same after replacement of defective spares and bring back the self starter from workshop to site and re-install the same to its original position and reconnecting all connections and mechanical supports etc. complete as specified and as directed. |
| 55 | Disconnecting and taking down carefully defective self starter of 24 volt capacity of 15 to 25 KVA DG Sets duly disconnecting all electrical cable connections and mechanical supports, transport the same to civil authorised work shop and dismantling and opening into parts of self starter for assess the defects and damaged parts and rectifying the defects by changing the defective spares including testing the same after replacement of defective spares and bring back the self starter from workshop to site and re-install the same to its original position and reconnecting all connections and mechanical supports etc. complete as specified and as directed. |
| 56 | Supply and fix battery brass terminals set of two with copper cable of 10 Sqmm single core with 1.5 m length complete as specified and as directed. |
| 57 | M&L for dismentaling the unserviceable radiator for DG set of capacity metion in below from engine, transportation to the workshop of contractor or repair at site, repair the tank /storage portion incl necessary welding & making leak proof of the tank, cleaning the complete radiator with chemical agent and assembling the radiator including replacement of all old rusted MS nuts, bolts washers & gasket sets including refixing and testing complete all as specified and as directed for the following DG Sets. |
| 58 | 15/20/25 KVA DG Set |
| 59 | 140 KVA DG Set |
| 60 | M&L for dismantling turbocharger assembly from the DG set of capacity mention in below from engine, transportation to work shop for repair or repair at site if possible, cleaning and carrying out inspection of each components/spares segregation of serviceable spares for reuse including decarbonising machine, cutting, grinding polishing etc. and re-assembling the Turbocharger complete for the following DG sets complete all as specified and as directed. |
| 61 | 15/20/25 KVA DG Set |
| 62 | 140 KVA DG Set |
| 63 | M&L for Taking out exhaust silencer box and pipe from the DG set, decarburizing and cleaning the silencer box including replacement of nut, bolts, washers clamp/bracket and refixing and wraping with asbestos rope and powder complete as specified and as directed.(Note:- Unit rate consist of Asbestos rope and powder) |
| 64 | M&L for Dismantling of injector assembly of the DG set of 15/20/25/140 KVA capacity from engine for repair, cleaning and overhauling of the same with necessary calibration including replacement of necessary repair item as required complete all as specified and as directed. |
| 65 | Supply only distilled water in 5 Ltr packed bottle suitable battery all as per sample of approved make. |
| 66 | Supply only coolant of (5Ltr in pack) suitable for DG sets all as per sample of approved makes complete as specified and as directed. |
| 67 | Supply only Engine Oil suitable for DG Set (K-Oil 15W/40) (in 20 Ltrs Container) complete all as specified and as directed. |
| 68 | Supply only Engine Oil suitable for DG Set (K-Oil 20W/40) (in 20 Ltrs Container) complete all as specified and as directed. |
| 69 | Supply and fixing of heavy duty lead acid storage battery of 12 Volts, 120 AH capacity suitable for DG set, complete with intercell connectors, terminal ends, nuts, bolts, washers, including initial charging, testing and commissioning complete all as specified and directed. |
| 70 | Supply and fixing of heavy duty lead acid storage battery of 12 Volts, 100 AH capacity suitable for DG set, complete with intercell connectors, terminal ends, nuts, bolts, washers, including initial charging, testing and commissioning complete all as specified and directed. |
| 71 | B/R PORTION (CODE HEAD-01/464/00) |
| 72 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 73 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. |
| 74 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 75 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion (embedded in natural ground) and making good disturbed ground complete all as specified and directed. |
| 76 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion (embedded in concrete, brick work, masonary etc) and making good disturbed ground complete all as specified and directed. |
| 77 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 78 | Dismantling wrought iron, or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 79 | Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 80 | Excavation in post holes in soft/loosesoil or similar holes each n exc 0.5 cum getting out returning, filling in and ramming earth on broken rubble in layers n exc 25 cm watering and remaning surplus soil to a distance n exc 50cm and making good surface complete all as specified and directed. |
| 81 | M&L providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4. for drain cover complete all as specified and directed. |
| 82 | M&L for mild steel TMT bars 5mm to 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed. |
| 83 | S&F for mild steel work as in angle iron fencing posts, struts and flat iron for fixing chain link fencing , flat iron for fencing and similar work conforming to Fe-290 Gde E- 165 including cutting tops to shape as directed, bent to shape, drilling holes, notching, hooking for wire etc., complete all as specified and as directed. |
| 84 | M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation of poles/ struts/ stay assembly etc complete all as specified and as directed. |
| 85 | Supply only mild steel galvanised chain link fencing, any size or type complete all as specified and directed.Note :- (a) Flat iron, round tie bars, nut bolts and washer shall be measured and paid for separately. (b) Weight of chain link shall be ascertained by the BOO ordered by Accepting Officer. |
| 86 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.Note:- Supply only Chain link and line wire shall be measured and paid separately under respective items. |
| 87 | S&F 10mm dia MS rounds bars provided in between fencing post to support chain link fencing incl necessary cutting, bending and hooking etc as required complete all as specified and as directed. |
| 88 | S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5cm but not exceeding 10cm long and dia of neck exceeding 10mm but n.exc 15mm complete all as specified and as directed. |
| 89 | S&F for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed. |
| 90 | M&L preparing new steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 91 | M&L for preparing new Steel surfaces of any description, not otherwise describe not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 92 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and as directed. |
| 93 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 94 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 95 | M&L for preparing newly plastered or unplastered walls surfaces and applying two coats of cement base paint over and including a coat of cement base primer complete all as specified and directed. |
| 96 | M&L for providing cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.Note :- Forming fair finished channel shall be measured and paid separately under respective item of the BOQ. |
| 97 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as directed. Note :- Measurment shall be taken only for inner girth. |
| 98 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto as above item |
| 99 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc rough finished surface of concrete complete all as specified and directed. |
| 100 | M&L for cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed |
| 101 | S&F machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over 50mm thick sand bed layer complete all as specified and as directed. (Note:-Bedding layer of sand will be measured and paid separately) |
| 102 | M&L for providing sand filling under interlocking paving blocks including watering and consolidation complete all as specified and directed.(Note : Punned thickness shall be measured). |
| 103 | Dismantling floors,hearth or wall tilling including cememt mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 104 | M&L for factory made chequrered cement concrete coloured tiles 30cmx30cmx 25mm thick, set jointed and pointed in neat cement slurry in floor as in floor, paving and steps etc with mixture of white and grey cement in equal proportion and no pigment including 20 mm screed bed in CM 1:6 complete all as specified and as directed. |
| 105 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base of floors and path, finished even and fair complete all as specified and directed. Please Enable Macros to View BoQ information |
