|
| 1 | Taking down cement plaster on wall, ceiling, chajjas, roof projections, lintel, etc of any description including raking out joints, hacking for key and scrubbing down with water etc and disposing off the rubbish materials out side MD land complete all as specified and directed. |
| 2 | M&L for 20 mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid seperately under relevant item of schedule 'A'. |
| 3 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and directed. |
| 4 | M&L for 15mm thick rendering in cement mortar 1:6 on fair face/other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and directed. |
| 5 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for preparing new Plastered surfaces of walls and applying two coats acrylic-based distemper of shade as approved by GE over a coat of primer over a coat of putty (average 1.5mm thick) on surfaces of wall as per the manufacturer's instructions complete all as specified and directed. Note: Application of new finishes to be carried out mechanically by authorised applicator and as per the manufacturer's instructions. |
| 7 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats acrylic based distemper of shade as approved by GE over a coat of primer over a coat of putty (average 1.50mm thick) on surfaces of wall including preparation as per the manufacturer's instructions complete all as specified and directed. Note: Application of new finishes to be carried out mechanically by authorised applicator and as per the manufacturer's instructions. |
| 8 | M&L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior anti-fungal paint of required shade as approved by GE : New work (Two coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm) over and incl a coat of putty (average 1.50mm thick) complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment of old plastered surfaces of walls and finishing the walls with Acrylic smooth exterior anti-fungal paint of required shade as approved by GE : New work (Two coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm) over and incl a coat of putty (average 1.50mm thick) including preparation complete all as specified and directed. |
| 10 | M&L for preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed. |
| 11 | M&L for preparartion of old surfaces of ceiling & applying two coat of white washing complete all as specified and directed. |
| 12 | M&L for brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed |
| 14 | M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and directed. |
| 15 | Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed |
| 16 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and directed. |
| 17 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tileexceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified and directed. |
| 18 | M&L for 10 mm thick rendering/ backing coat in CM (1:3) as in vertical surfaces of skirting, dados etc complete all as specified and directed. |
| 19 | M&L for glazed ceramic coloured tiles/ digital elevation tiles of size 300 X 450 X 7-8 mm/300 X 600 X 7-8 mm thick as on vertical surfaces of wall such as skirting, dado, riser etc. in Bath, WC and Kitchen set and jointed in neat cement slurry and pointed in with tile grout of approved make to match the surface of tile as approved by Engr-in-Charge complete all as specified and directed. |
| 20 | M&L for machine cut kota stone slab flooring 18-20mm thick, laid over 20mm thick cement screed base in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete, including rounding the exposed edges of kota stone complete all as specified and directed. |
| 21 | All as per item No 20 here in before but as in skirting ( 12 to 15 mm thick) but on 15 mm thick rendering/ backing coat in CM (1:3) complete all as specified and directed. |
| 22 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and directed. |
| 23 | M&L for water proofing treatment to RCC roof slab including parapet comprising of the following course of tretment/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per Sqm over plastered surface of roof including parpet surfaces. Bitumnious primer shall be 'Tar Mastic' manufactured by M/S STP LTD or 'EMW FLATE; manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrane with non woven polyster fabric weight not less than 160 gms per sqm. Polymeric membrane shall be taken to a height of 60cm (mim) and than inserted th groove of perafit wall and shall be finished a membrance flashing (c) Application of two coats of Bituminous aluminum paints over the polymeric memnrance after necessary preparation and cleaning, Thickness 3mm.Note :- Laying APP based polymeric membranceshall be done by tourch on mathod or as per manufacture insturction. (ii) A minimum overlap of 100 mm shall be maid at the end 75mm shall be maid at the side and sealed overlaped and joint as per manufacture instructions. Make :- \\"SUPER THERMOLAY\\" manufacturer by STP Ltd of MOPLY FP manufacture by Texsa India Ltd. |
| 24 | M&L for 10mm thick screedd bed or bedding layeres in cement mirter (1:4) in order to maintain proper slope over existing roof surface for applying single component acrylic polymner modified, fininshed even and smooth without using extra cement mixed with water proofing compound complete all specified and as directed. Note :- Polymeric membrane and WPC shall be measured and paid spearately under relevant items of this Sch 'A'. |
| 25 | M&L for 25mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) mixed with water proofing compound and laid on RCC slab as base layer for roof tratment rufning the topo surface of concrete by using broom stick while the cocrete is green complete all as specified. Note:- WPC paid separatly under relivant items. |
| 26 | S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator with guard bars and making good disturbed surfaces of wall complete all as specified and directed. |
| 27 | S&F factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified and as directed. |
| 28 | S&F factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete with glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified and as directed. |
| 29 | S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and directed. |
| 30 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 31 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and and directed. |
| 32 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 33 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n exc 4 sqm each and removal from site including cutting holes for taking out hold fast or dismantling brick work/ stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt) complete all as specified. |
| 34 | S&F pressed steel frames of size 125x60 mm with thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming complete all as specified and directed.Note:- The sizes/dimensions and type (profile) of frames shall be as shown in I.S. |
| 35 | S&F pressed steel frames of size 105x60 mm with thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming complete all as specified and directed.Note:- The sizes/dimensions and type (profile) of frames shall be as shown in I.S. |
| 36 | S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. |
| 37 | S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats. |
| 38 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area n.exc 1.5 sqm each and removal from site including cutting holes for taking out hold fast or dismantling brick work/ stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt) complete all as specified. |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed. |
| 40 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed complete all as specified and directed. |
| 41 | M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 42 | M&L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 43 | S&F 100 mm butt hinges stainless steel complete all as specified and directed. |
| 44 | S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 45 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed. |
| 46 | S&F aluminium handles 150mm size cast type anodised complete all as specified and directed. |
| 47 | S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all specified and directed. |
| 48 | S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed. |
| 49 | S&F aluminium handles 125 mm size cast type anodised complete all as specified and directed. |
| 50 | S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 51 | S&F in repair stainless steel curtain rod of 25 mm dia and thickness not less than 0.75 mm fixed with curtain rod holder and finials etc. complete all as specified and directed. |
| 52 | Demolition of cement concrete (Reinforced) of any description in any position not otherwise specifically provided for complete all as specified. |
| 53 | Use and waste of formwork to sides and soffits of, shelves, platform etc rough finished surfeces of concrete flat etc complete all as specified and directed. |
| 54 | M&L for RCC nominal mix type A1 1:1.5:3 using 20mm gradded stone aggregate Slabs supported on walls, beams and columns in floors, shelves, platform, lintel, deck slabs and the like complete all as specified and directed. |
| 55 | Demolition of cement concrete (un-reinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 56 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded agg) 25 mm thick (average) stone aggregate as in sub base, levelling course to receive floor topping complete all as specified and directed. |
| 57 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even & fair without using extra cement including filiing the joints with bitumen & sand in 2:1 proportion etc complete all as specified and directed. |
| 58 | Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 59 | Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal form site complete all as specified and directed. |
| 60 | S&F 15mm bore pipe medium grade galvanised iron water tube concealed (including cutting chasing and making good) with all fittings laid in floors/ fixed to wall etc complete all as specified and directed. |
| 61 | S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and directed. |
| 62 | S&F in repairs wash hand basin vitreous China, white, flat back (550x400mm) including cutting for and pinning ends of brackets and waste coupling of Bass CP for basin etc with long screwed shanks and fly nuts, full threaded flage embedded in white cement incl PVC waste pipe required length complete all as specified |
| 63 | S&F in repairs beveled edge mirror of size 600 x 450 mm, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection, PVC flush pipe of required length complete all as specified and directed. |
| 65 | S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with suitable size PVC 'P' or 'S' trap including provision of cement concrete bedding complete all as specified and directed. |
| 66 | S&F in repairs Bib taps fancy type, brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and dierected. |
| 67 | S&F 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and directed. |
| 68 | S& in repair vitreous China Urinal, Half stall type, white (including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 69 | S&F in repair urinal spreader of CP brass for fixing with 15 mm dia pipe complete all as specified and directed. |
| 70 | S&F fancy type swan neck pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed. |
| 71 | S&F in repair 15 mm bore angle cock CP with flage complete all as specified and directed. |
| 72 | S&F in repair for 75 mm bore PVC (SWR) floor trap, plain with CP grating (with or without hole) including jointing with solvent cement complete all as specified and directed. |
| 73 | Taking down CI/PVC/AC soil pipe including fittings from wall, treches of any description complete all as specified and directed. |
| 74 | S&F 110mm bore PVC (SWR) pipes, type 'A', single socketed confirming to IS- 13592:1992) in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 75 | S&F 110mm bore PVC (SWR) pipes, type 'A', single socketed confirming to IS- 13592:1992) in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 76 | S&F 110mm bore PVC bends of any radius complete all as specified and directed. |
| 77 | S&F 110mm bore PVC (SWR) branch piece double (double 'Y') equal or unequal complete all as specified and directed. |
| 78 | S&F 110mm bore PVC (SWR) junction double (double 'T') equal or unequal complete all as specified and directed. |
| 79 | S&F 110mm bore PVC SWR vent cowl complete all as specified and directed. |
| 80 | S&F 75mm bore PVC (SWR) pipes, type 'A', single socketed confirming to IS- 13592:1992) in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 81 | S&F 75 mm bore PVC (SWR) bends of any radius with acess door complete all as specified and directed. |
| 82 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal complete all as specified and directed. |
| 83 | S&F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal complete all as specified and directed. |
| 84 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 85 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified and directed. |
| 86 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete as specified and directed. |
| 87 | S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and dierected. |
| 88 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 89 | M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in path /steps laid with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified. |
| 90 | M&L for coated pre polished coloured chequered cement concrete tiles made with grey cement and pig-ments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 91 | M&L for cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified. |
| 92 | Removing building materials and debris (other than excavated earth) to a distance of 5 KM inside MD Land at locations specified including loading and dumping/ leveling at the destination complete all as specified and directed. |
| 93 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed. |
| 94 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge. |
| 95 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed |
| 96 | Removing excavated materialn exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 97 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed |
| 98 | M&L for RCC Type B-1,M-20 (1:1.5:3) (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 99 | M&L RCC Type B1 M-20 (1:1.5:3) (20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified. |
| 100 | M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 101 | M&L Formwork square, rectangular or ploygonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 102 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 103 | Ditto, as above item no 9 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 104 | Sand filling under floors or in foundations including watering and consolidation |
| 105 | M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed by the Engr-in-Charge. |
| 106 | M&L for 100 mm thick cement concrete type C2 (1:3:6 ) (40 mm graded aggregate) as in subbase of floor etc and finished the complete all as specified and as directed. |
| 107 | M & L 60 mm thick M-30 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directd. |
| 108 | M & L for PCC 1:2:4 type B-I ,(using 20 mm graded stone aggregate) as. in coping /benching to sides of foot path fininished fair and even including necessary formwork etc complete all as specified and direected. |
| 109 | S&F steel work in Trusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/IS 4923-1977 grade St-240 complete all as specified and as directed |
| 110 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by the Engr-in-Charge. |
| 111 | S& F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 112 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 113 | M&L for PCC type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 114 | M&L for 75 mm thick cement concrete 1:2:4 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form work and finishing the surface even and smooth using extra cement & 3 mm concrete floors for coloured cement mortar 1:2 finish including polishingcomplete all as specified and directed. |
| 115 | Demolition of brick work built in cement mortar of any description complete all as specified and as direcetd. |
| 116 | M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm) etc all as specified and directed. |
| 117 | Demolition of brick work built in cement mortar of any description complete all as specified and as direcetd. |
| 118 | M&L brickwork with fly ash birck straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks etc all as specified and directed. |
| 119 | M&L brickwork with fly ash birck straight or curved to plan any radius built in cement mortar 1:6 by using old size bricks etc all as specified and directed. |
| 120 | M&L Gun-metal, globe or gate valves,15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as direcetd. |
| 121 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter finished the surface even and smooth using extra cement complete all as specified and as directed. |
| 122 | M&L for PCC 1:3:6 type C2 using 20mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel complete all as specified and directed. |
| 123 | M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed. |
| 124 | Add or deduct to item no 10 for each 25 mm girth or part thereof over or under 30cm in girth complete all as specified and directed. |
| 125 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 126 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated, IS 694 unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes duly painted with anticorrosive paint, concealed in walls with bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sunken for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications all as specified and as directed for the following :- |
| 127 | (a) One light point controlled by one way switch 5/6 amps. |
| 128 | (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 129 | (c) One socket out let 5/6 amps point on the same board |
| 130 | (d) One socket out let 5/6 amps point on the independent board |
| 131 | All as per item No 126 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 132 | S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. |
| 133 | S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. |
| 134 | S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. |
| 135 | S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 136 | S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 137 | S&F LED lights fitting 1x 20W, 220V AC decorative box type with driver,IP 20, class I, wall/ surface mounted, integrated type with extruded aluminium housing integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. |
| 138 | S&F LED Bulk Head lights fitting 1x 9/10W, 220V AC integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed etc connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 139 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp,IP 20, class I, wall/ surface mounted, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 140 | Supply and fixing Ceiling Fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified by Engr in charge. |
| 141 | Supply and fix Exhaust fan, Steel body AC single Phase. 230V of size 300 mm sweep, heavy duty with, blades, and frame and louvers including connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed |
| 142 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 143 | S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 144 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘B’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 145 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust and salt including PCC earth pit 1:3:6 type C1 using 20mm graded stone aggregate of standerd size with suitable Pit Cover and plastering on both side complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge. |
| 146 | M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length.) . |
| 147 | Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge Please Enable Macros to View BoQ information |
