|
| 1 | Taking down cement plaster of any description on bricks walls etc, including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified. |
| 2 | M&L for 15mm thick rendering in CM (1:6) on fair faces of brick/concrete finished even and fair without using extra cement including necessary steel scaffolding for working platform etc complete all as specified. |
| 3 | M&L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete finished even and fair without using extra cement including necessary steel scaffolding for working platform etc complete all as specified. |
| 4 | Demoltion of brick work built in cement mortor including all quoins, arches, pillars etc complete all as specified. |
| 5 | M&L brick work with subs class \\"B\\" bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified. |
| 6 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, over a coat of primer over 3mm thick wall care putty on walls complete all as specified. |
| 7 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 8 | Demolition of cement concrete unreinforced in floor incl tiles in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified. |
| 9 | M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement over cement slurry over existing roof @3 % complete all as specified.Note:- WPC Shall be measured and paid seperatly |
| 10 | M&L providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the rati of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified. |
| 11 | Supply only water proofing compound ISI marked complete all as specified. |
| 12 | S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqm complete all as specified. |
| 13 | M&L PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) 75mm thick finished even & smooth without using extra cement complete all as specified. |
| 14 | M & L for Endura outdoor Tiles , of size 300x300x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified. |
| 15 | Supply and fixing Cement concrete tiles (300 mm x 300 mm x 20 mm) sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including complete all as specified. |
| 16 | M&L for Coloured / matte finish Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified. |
| 17 | M&L for Vitrified ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm including and over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premises complete all as specified. |
| 19 | Dismantling of stone slab and tiles of any description or thickness in floors, etc laid beded and pointed in any mortar complete all as specified. |
| 20 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in over and including 15mm thick screed bed in cm 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 21 | M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with greypigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 22 | M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 23 | Cutting, polishing to existing Kota/ marble flooring,mirror polishing including levelling certain places to Kota/ marble floor,necessary repair work complete all as specified. |
| 24 | S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified. |
| 25 | S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting complete all as specified. |
| 26 | Dismantling existing water tank of capacity exc 250 ltrs & n. exc. 500 ltrs and S &F of Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top)with 20mm dia ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position complete all as specified in SSR part - I. |
| 27 | Dismantling existing water tank of capacity exc 500 ltrs & n. exc. 1000 ltrs and S &F of Rotational moulded polyethylene water storage tanks 1000 Ltr (cylinderical vertical with closed top)with 20mm dia ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position complete all as specified in SSR part - I. |
| 28 | S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor matching with existing complete all as specified. |
| 29 | S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified. |
| 30 | S & F powder coated Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified. |
| 31 | S & F powder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing handles 2 Nos in each door,hinges anodized aluminium snap beading screw etc complete all as specified. |
| 32 | S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng, anodised aluminium snap leading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long Nos suitable handle 01 No complete all as specified. |
| 33 | S&F in Replacement double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified. |
| 34 | S&F in repair Aluminium extruded section body door closer hydraulically regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 35 | Dismantling Asbestos cement (plain or corrugated, etc) sheets in roof coverings including ridge complete all as specified. |
| 36 | S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,in ridge fixed with self tapping screws complete all as specified. |
| 37 | S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws complete all as specified. |
| 38 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets and frame work complete all as specified. |
| 39 | S&F PVC wall panelling with panel of 300 mm x 4 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified. |
| 40 | M&L for Non asbestos fibre cement building boards 4MM thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified. |
| 41 | S&F anodised aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specified. |
| 42 | S&F hangers 6mm dia. G.i. (up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and hold fasterners 12.5mm dia 40mm long complete all as specified. |
| 43 | M&L for greasing of rolling shutter of size not exc 18 sqm alongith the guide channel,helical spring,anchoring and all other as to work the shutter in easy way and complete all as specified. |
| 44 | S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified. |
| 45 | S&F in repair Ball bearing for rolling shutters complete all as specified. |
| 46 | Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified. |
| 47 | Taking down chowkats or frames exc. 1.5 sqm but not exc. 4 sqm each without taking off shutters from frames complete all as specified. |
| 48 | Taking down shutter of any description area exc 1 sqm and n. exc 2 Sqm each complete all as specified. |
| 49 | S & F colour powder coated mild steel continuous (piano) hinge, width of flaps(when open) is 30mm complete all as specified. |
| 50 | S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/ adhesive to make cupboard shutter complete all as specified. |
| 51 | S & F stainless steel handle of 110mm size of best quality complete all as specified. |
| 52 | S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified. Please Enable Macros to View BoQ information |
