|
| 1 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 2 | M&L for walling of random rubble uncoursed ,well bonded ,bedded and solidly hearted built in CM (1:4) and brought up to course complete all as specified and directed. |
| 3 | M & L for Walling of squared rubble,regular coursed, well bonded,bedded and solidly hearted masonary built in CM 1:4 including hammer dressing all as specified and directed. |
| 4 | M&L for raised pointing to rubble or polygonal rubble, uncoursed or brought up to coarse with CM 1:3 |
| 5 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:4, complete. |
| 6 | M&L for Brickwork with old size fly ash bricks,for masonry straight or curved on plan,built in and setting in mortar 1:4 complete. |
| 7 | M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete,base for kerb stone including demolition all as specified and directed. |
| 8 | Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work and demolition complete as directed. |
| 9 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc |
| 10 | M&L for ready mix plaster 15mm thick on fair faces of brick work/concrete surfaces/ stone walls finished even and smooth complete all asspecifies and directed. |
| 11 | M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified |
| 12 | M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of cement based paint complete all as specified and directed. |
| 13 | Demolition of pre cast thick rcc louvers and jallies fixed with cement mortar complete all as specified and as directed. |
| 14 | Material & Labour for 35mm thick precast cement concrete louvres and jallies with rcc pillars type C-0 (1:3:6) using 12.5mm graded stone aggregate (measured solid), in cluding all mouldings and frame set in cement mortar 1:4. |
| 15 | Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified. |
| 16 | S&F for Steel work in tubular trusses,post,purlin,rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 |
| 17 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410-W (Gde E-250) quality A,complete all as specified and directed |
| 18 | M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. |
| 19 | M & L for RCC ( Nominal )type B1 1:2:4 20mm graded concrete as in foundations, plinth beams; bases for columns,columns,rcc pillars etc.; basement slabs, under-reamed piles,post holes and mass concrete including demolition and necessary excavation for foundation all as specified. |
| 20 | S&F for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-charge. |
| 21 | M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 22 | Formwork to sides of flat rough finished surfaces of concrete foundations, footings, bases of columns, columns, beams, slabs, roof slab, lintel, chajjas and similar work; (leak proof type) vertical, horizointal or to batter complete all as specified and directed by Engineer-in-charge. |
| 23 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 24 | Dismantling fencing wire mesh, any type complete all as sspecified and directed. |
| 25 | M&L for PCC (1:2:4) type B2 using 20mm graded stone aggregate as in foundation filling in post holes complete all as specified and directed |
| 26 | S&F MS works in posts and struts in fencing including cutting tops to shape as directed,drilling holes,including all necessary drilling,bolting or reveting,etc,and similar wark conforming to Fe-290 Gde E-165. |
| 27 | M&L 40x6mm thick flat iron fillets fixed to the fencing posts incl all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0. |
| 28 | Supply only chain link fencing ,any size or type complete all specified and directed. |
| 29 | Fixing only chain link fencing including line wires,any mesh,size and type to any type of standards,rails,starining bolts,etc. including provission of binding wire. |
| 30 | S&F 12 mm dia Mild screw bolts machine made with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 7.5cm but n exc 15cm long. |
| 31 | Dismantling barbed wire fencing of any description |
| 32 | S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately). |
| 33 | Restraining and rescuring including making good staple of Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing andincluding securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins,etc complete all as specified and directed. (each line wire to be measured separately). |
| 34 | M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 35 | M &L for preparation of old painted surfaces of steel of any description and in any position not exc 10 CM width or girth; not otherwise described, and applying two coat of synthetic enamel paint , complete including necessary scaffolding arrangement as required at site all as specified and directed |
| 36 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 37 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering |
| 38 | S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws as specified. |
| 39 | S&F of 2mm Fibre glass reinforced translucent corrugated/plain sheeting side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by engr-in-charge. |
| 40 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed. |
| 41 | Supply & Fixed in repair aluminium composite panel not less than 3.0 mm thick and including covered both side by encapsulated lens type retro reflective sheet (grade 3 M type II diamond grade of make 3M/dark eye/ SNI) colour of any base,with and including all type and any size of writting letters and symbols of reflective type over tubular framework with necessary brackets,screws,rivets and approved sealant includding cutting,bending grooving and fixing complete as per specifications and all as directed by Engr-In-charge. |
| 42 | Supply & Fixed in repair plain aluminium composite panel not less than 3.0 mm thick fixed colour of any type over tubular framework with necessary brackets,screws,rivets and approved sealant includding cutting,bending grooving and fixing complete as per specifications and all as directed by Engr-In-charge. |
| 43 | Material & Labour for repair and fixing stainless steel (Grade 304) railing with chain made of hollow tubes,channels,platesetc.,includingwelding,grinding,buffing,polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 44 | S&F in repair stainless steel letters (any from A to Z or any hindi letters ) 100mm to 250mm height, 25-125mm width and 25 to 40mm depth made of 0.79 mm thick (22 gauges) stainless steel 304 grade with seemless welding rubbed polished (Golden/Silver/Rose Gold) and edges made smooth with necessary fixing devices like SS screws or as per manufactur's instruction to fixed on ACP sheet,wall or stone complete all as specified and directed by Engr -in-charge. |
| 45 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint complete all as specified and as directed. |
| 46 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 47 | M&L for 75 mm thick cement concrete 1:3:6, type C-2 (40mm graded aggregate) as in floors,hardstanding complete all specified and directed. |
| 48 | M&L for Sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as directed. |
| 49 | M&L for rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment including dismantling of old paverblock complete all as specified and directed. |
| 50 | M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick,set in 20mm thick screed bed in cm (1:4) jointed in neat cement slurry in floors with grey pigment cement and pigments,including demolition of old tiles complete all as specified and directed. |
| 51 | M&L for 300x300x10mm thick non skid parking floor glosy finish paver tiles with grey cement and pigment over and including 20mm thick screed in cm(1:4), set joinet and pointed in neat cement slurry in floors concrete,including demolition of old tiles complete all as specified and directed. |
| 52 | M&L for 400x400x10mm thick non skid parking floor glosy finish paver tiles with grey cement and pigment over and including 20mm thick screed in cm(1:4), set joinet and pointed in neat cement slurry in floors concrete,including demolition of old tiles complete all as specified and directed. |
| 53 | M&L for laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and dismantling of old kerb stone complete. |
| 54 | Taking out and refixing old kerb stones in PCC 1:4:8 type D-2 bed including jointing , alignment, curing and all necessary works complete all as specified and directed. |
| 55 | M&L for new or previously untreated surface of concrete, cement plaster surfaces of any description over 10cm in girth or width and painting with two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed. |
| 56 | M&L for preparation of old painted cement,concrete, plaster surfaces of any description over 10cm in girth or width and painting with one coat of plastic emulsion paint complete all as specified and as directed. |
| 57 | Taking up of old rubber moulded machine pressed precast concrete interlocking paver block,cleaning and stacking serviceable blocks,preparing the base by laying PCC 1:4:8 of required thickness,providing sand bedding layer and refixing the old paver block in proper line and level any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed. Please Enable Macros to View BoQ information |
