|
| 1 | Note: The following notes shall be applicable for all the Items where ever specified that the work is to be carried out through \\"authorised applicator\\" and the rate quoted by the Contractor shall be deemed to be included for the following provisions and nothing extra shall be paid to the contractor on this account (a).The work shall be executed from the authorized applicator of one of the approved paint manufacturer by using mechanical means ie for scrapping and cleaning surfaces with mechanical sander(having mechanical vaccum mechanism)and application of primer and paint by airless spray machine . (b) Material shall be approved by GE (c) A triparty MOU in between the Manufacturer, applicator and the contractor shall be submitted by the contractor before commencement of the work at site. |
| 2 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MOD land complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick in cement mortar 1:4 on external wall using water proofing compound as per manufacture instruction on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement all as specified and as directed. (WPC shall be measured and paid seperatly) |
| 4 | Supply only water proofing compound. |
| 5 | M&L for rendering 10mm thick on brick or concrete surfaces in CM (1:6) used on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and directed. |
| 6 | M&L for rendering 10mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint with one coat of primer in normal pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. |
| 8 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted with roller, over one coat of primer by using complete all as specified and directed. |
| 9 | M&L for prepration of new plastered ceiling surfaces and applying three coat of white washing complete all as specified and directed |
| 10 | M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed. Note:- All pot holes/cracks to be filled by putty. |
| 11 | All as per item above here in before but on ceiling surfaces one coat complete all as specified and directed. |
| 12 | M&L Complete removal of existing treatment on wall/roof projections including facia,cornices etc by scrapping with mechanical sander(having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed. |
| 13 | M&L for old plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted with mechanical means,through authorised applicator of manufacturer complete all as specified. |
| 14 | M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion white or tinted ,incl repair of holes and cracks through authorised applicator of manufacturer complete all as specified. |
| 15 | M&L for preparation of old plastered surfaces of Ceiling and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed. |
| 16 | M&L for old surfaces and applying two coats of exterior emulsion paint with one coat of primer in normal pattern through authorised applicator of manufacturer and as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. |
| 17 | M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed |
| 18 | M&L for preparation of old surfaces and applying One coats of exterior emulsion paint in normal pattern through authorised applicator of manufacturer and as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:-Repairs of pot holes, cracks and undulation in surface with wall care putty as required. |
| 19 | M&L for applying one coat of cement base paint on old surfaces of walls including preparation of old surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots and efflorescence salts, removing nails and making good complete all as specified. |
| 20 | M&L for preparation of old painted surfaces of any description over 10cm girth or width,not otherwise described and applying two coats of Plastic emulsion paint complete all as specified and directed.Note:- Plastic emulsion paint to be applied through mechanical means only. |
| 21 | M&L for preparing old decorated wooden or wood based surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 22 | M & L for prepararing old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | M&L for applying one coat of plastic emulsion paint incl. prepation of old painted surfaces of walls complete all as specified and directed. |
| 24 | M&L for writing letters or figures (Block, romman, itallic or Indian) n. exc. 30 cm high, complete all as specified and directed. |
| 25 | M&L for preparation of old painted steel roof surfaces of corrugated/ plain steel sheet of any description, over 10cm in width or girth, not otherwise described and applying one coat of antisol roof paint (MB Green) complete all as specified and as directed. |
| 26 | M&L for stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed. |
| 27 | Dismantling of existing roof treatment of any type and any description including tarfelt,APP membrane, mud phuska,cement plaster ,cement concrete of any thickness etc from roof surfaces including cleaning the surface with mechanical means and removing the debris from site complete all as specified & directed. |
| 28 | M&L for providing, cement concrete in 1:2:4 type B0 (using 12.5mm graded stone aggegate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as in levelling course / padding over roof complete all as specified & directed. |
| 29 | M&L for preparation of new/old plastered surfaces of concrete/brick surface and applying three coats of smart care damp proof ultra of asian paint or similar of first quality keeping minimum interval between application 6 hrs,all as per manufacturers instruction and as directed |
| 30 | M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and as directed. |
| 31 | Taking down GI pipe of any grade of 15mm bore including fittings complete all as specified and directed |
| 32 | S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls,ceilings or laid on floors/roof,bore of 15mm tube complete all as specified and directed |
| 33 | Taking down GI pipe of any grade of 20mm bore including fittings complete all as specified and directed |
| 34 | S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls,ceilings or laid on floors/roof,bore of 20mm tube complete all as specified and directed |
| 35 | All as Srl item No 35 above but except GI Tubing |
| 36 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or as rainwater pipe in wall complete |
| 37 | S&F in repair PVC (SWR) bends of 110 mm bore complete |
| 38 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement incl demolition complete all as specified. |
| 39 | M&L for water proofing treatment to roofs surfaces including a coat of applied bituminous shalitex primer @ 0.30 lit per sqm evenly on roof surface and a coat of hot bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3 kg/sqm) unrolled and bonded completly to the substrate with side overlap of 75 mm and end overlap of 100 mm and then sealed/fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.2 kg/sqm shall be applied on top of APP modified polymeric membrane as per manufacturer instruction and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm , including 10 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:4 and incl taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc complete all as specified and as directed . |
| 40 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity n exc 250 Ltrs ,cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm complete all as specified and as directed. |
| 41 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity exc 250 Ltrs but not exc 500 Ltrs ,cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm complete all as specified and as directed. |
| 42 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity exc 500 Ltrs but not exc 1000 Ltrs ,cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm complete all as specified and as directed. |
| 43 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity exc 1000 Ltrs but not exc 2000 Ltrs ,cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm complete all as specified and as directed. |
| 44 | S&F in repair Ball valves 15 mm bore high pressure of PTMT (minimum weight- 142 gms) with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe fixed complete all as directed. |
| 45 | S&F in repair Ball valves 20mm bore high pressure of PTMT (minimum weight- 210 gms) with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe fixed complete all as directed. |
| 46 | Supply & Fix in repair PVC cover for water storage tank of capacity exc 200 Ltr but n.exc. 500 Ltr complete all as spd and directed. |
| 47 | Supply & Fix in repair PVC cover for water storage tank of capacity exc 500 Ltr but n.exc. 1000 Ltr complete all as spd and directed. |
| 48 | M&L superthermolay waterproofing APP membrane thickness 1.2mm polyster etc including laying on Roof sheet for leakage/seepage all as specified and directed |
| 49 | Dismantling floor, hearth or wall tiling/stone including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed |
| 50 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete |
| 51 | M&L for 30mm thick sand stone slabs; set and jointed over joists, etc., jointed in 1:3 cement mortar complete |
| 52 | S&F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410- W(Gde- E-250) quality-B complete |
| 53 | Dismantling of AC/steel sheets and the like (corrugated/semi corrugated/plain) in roof covering incl ridge all as directed. |
| 54 | S&F 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. |
| 55 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete |
| 56 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 57 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 58 | M&L for preparation of new or previousely untreated steel roof surfaces of corrugated/ plain steel sheet of any description, over 10cm in width or girth, not otherwise described and applying one coat of antisol roof paint (MB Green) complete all as specified and as directed. |
| 59 | M&L in repair for 25 mm thick 2 class Hard wood eves Boarding, fixed with nails /bolting /screwing to roof lable with angle /timber frame work incl dismantling complete all as specified and as directed. |
| 60 | M&L for ,false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed. |
| 61 | M&L for repair to leakage /seepage from 'J' Hooks of CGI /AC/Galvalume roof sheets by replading cup washer and bitumen washer including necessary T & P complete all as specified and directed. |
| 62 | M&L for 4 mm thick E boards sheet in panels of size 595mmX 595mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing ceiling and taking down and refixing of electric fitting care fully complete all as specified and as directed. Please Enable Macros to View BoQ information |
