|
| 1 | REPAIR TO ALMIRAH LARGE STEEL (DRG NO FD-1031,FD/E6/MAP/18):-` |
| 2 | M&L for removing dents and bends and welding wherever required for Almirah Large Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah large steel complete(inside and outside) with a coat of synthetic enamel paint as approved all as per drg complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Almirah as a whole shall be measured as one unit. |
| 3 | S& F for replacement of old lock with new one providing new locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key all as per drg complete all as specified and as directed. |
| 4 | S& F for replacement of old 3 way locking device with new one best quality as approvedMake:- As approved by Engr-in-Charge |
| 5 | M&L for removing old /unserviceable legs and S & F of new Legs made out of 1 mm MS sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 6 | S&F of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer by removing opld unserviceable ones all as per drg complete all as specified and as directed.Make:- Godrej or Equivalent as approved . |
| 7 | S& F for replacement of butt hinges with new butt hinges best quality as approved with duplicate stainless steel key all as per drg complete all as specified and as directed.Make:- as approved by Engr-in-Charge |
| 8 | M&L for removing old /unserviceable Shelf and S & F of new shelf made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 9 | M&L for removing old /unserviceable Door and S & F of new Door made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 10 | REPAIR TO ALMIRAH MEDIUM/SMALL STEEL (DRG NO FD 350/1032/1034/104(M)):- |
| 11 | M&L for removing dents and bends and welding wherever required for Almirah Medium Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah Medium steel complete(inside and outside) with a coat of synthetic enamel paint as approved all as per drg complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed all as per drg complete all as specified and as directed.Note :- Almirah as a whole shall be measured as one unit. |
| 12 | S&F replacement of old lock with new one by providing new 7 lever lock of Godrej pattern of best quality as approved with duplicate stainless steel key all as per drg complete all as specified and as directed. |
| 13 | S&F replacement of old 3 way locking device with new one best quality as approvedMake:- As approved by Engr-in-Charge |
| 14 | M&L for removing old /unserviceable legs and S & F of new Legs made out of 1 mm MS sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 15 | S&F 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer by removing old unserviceable ones and as directed.Make:- Godrej or Equivalent as approved by Engr-in-Charge |
| 16 | S& F replacement of butt hinges with new butt hinges best quality as approved with duplicate stainless steel key.Make:- as approved by Engr-in-Charge |
| 17 | M&L for removing old /unserviceable Shelf and S & F of new shelf made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 18 | M&L for removing old /unserviceable Door and S & F of new Door made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 19 | REPAIR TO LOCKER STEEL (DRG NO FD 257/1029):- |
| 20 | M&L for removing dents and bends and welding wherever required for Locker Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Locker steel complete(inside and outside) with a coat of synthetic enamel paint as approved all as per drg complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Locker as a whole shall be measured as one unit. |
| 21 | S&F Hasp and staple chromium plated 100 mm long after removing of old unserviceable Hasp and staples all as specified on drawing and as directed .Make:- As approved by Engr-in-Charge |
| 22 | S&F 100mm long steel chromium plated handle after removing of old unserviceable handle as shown on drawing and as directed.Make:- Godrej or Equivalent as approved by Engr-in-Charge |
| 23 | M&L for Removing of old unserviceable conduit pipe and S&F of new conduit pipe of same size ie Chromium plated steel conduit pipe of 19 mm dia with 1.60mm wall thickness alongwith bracket all as specified on drawing and as directed.Make:- As approved by Engr-in-Charge |
| 24 | S&F replacement of butt hinges with new butt hinges best quality as approved with duplicate stainless steel key.Make:- as approved by Engr-in-Charge |
| 25 | M&L for removing old /unserviceable Shelf and S & F of new shelf made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces as directed. |
| 26 | M&L for removing old /unserviceable Door and S & F of new Door made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 27 | M&L for removing old /unserviceable legs and S & F of new Legs made out of 1 mm MS sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces all as per drg complete all as specified and as directed. |
| 28 | REPAIR TO TABLE OFFICE CLERK STEEL (DRG NO FD 381/1004):- |
| 29 | M&L for removing dents and bends and welding wherever required for Table office clerk Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete(inside and outside) with a coat of synthetic enamel paint as approved all as per drg complete all as specified and as directed.Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit. |
| 30 | M&L for Removing of old unserviceable locks and supply and fix of new brass locks with duplicate keys best quality all as per drg complete all as specified and as directed. |
| 31 | M&L for Removing old unserviceable Top and S&F of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and all as per drg complete all as specified and as directed. |
| 32 | M&L for removing old /unserviceable drawer and S & F of new drawer made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces as directed all as per drg complete all as specified and as directed. |
| 33 | REPAIR TO TABLE OFFICE OFFICER STEEL (DRG NO FD 84 (M) /1003 /1002):- |
| 34 | M&L for removing dents and bends and welding wherever required for Table office officer Steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office Officer steel complete(inside and outside) with a coat of synthetic enamel paint as approved all as per drg complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit. |
| 35 | M&L for Removing of old unserviceable locks and S&F of new brass lock with duplicate keys of best quality as approved all as per drg complete all as specified and as directed. |
| 36 | Removing old unserviceable Top and supply and S&F of new top made out of 18mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around all as per drg complete all as specified and as directed. |
| 37 | M&L for removing old /unserviceable drawer and S &F of new drawer made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces all as per drg complete all as specified and as directed. |
| 38 | REPAIR TO CHARPOY GI PIPE (FD-220) |
| 39 | M&L for Removing the existing unserviceable plytop and S&F of new 12 mm thick BWR plywood exterior grade quality including flush headed bolts and nuts with washers for fixing plywood to charpoy and spot welding wherever required. Plywood edges to be smoothened and corners rounded complete as specified and as directed by Engr-in-Charge.Note:- Tightening of existing frame after replacement of parts as mentioned in item 6.01 included in this item before replacing of plywood all as per drg complete all as specified and as directed. |
| 40 | M&L for Removing of following existing unserviceable long rail of charpoy carefully and S& F of new long rail including tightening of joints , placing every part in tact all as per drg complete all as specified and as directed. |
| 41 | All as per Item 6.02 above but for short rails retrived out of unserviceable/replaced long rails |
| 42 | All as per Item 6.03 above but for legs retrived out of unserviceable/replaced short rails and fixing wherever required for legs |
| 43 | All as per Item 6.02 above but for S & F of new 32mm dia GI medium grade 3 way elbow ISI marked |
| 44 | All as per Item 6.02 above but for S & F of new 5 mm checknut suitable for GI 32 mm medium grade pipe |
| 45 | REPAIR TO CHARPOY MS SQ TUBE PLY TOP FD/MAP-II/01 |
| 46 | M&L for Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required(legs/rails) and applying two coats of synthetic enamel paint black colour to match as per standard drawing and as directed. |
| 47 | M&L for Removing of old/unserviceable Ply top from Charpoy MS Sqr Tube & S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers as specified including removing existing rubber shoes and S& F of Hard rubber shoes ( 4 Nos) for each charpoyall as per drg complete all as specified and as directed. |
| 48 | REPAIR TO BED HARD STEEL (FD/E6/MAP/08) |
| 49 | M&L for Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required(legs/rails) and applying two coats of synthetic enamel paint black colour to match all as per drg complete all as specified and as directed. |
| 50 | M&L for Removing of old/unserviceable Ply top from Bed Hard Steel & S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers including S& F of new hard rubber shoes ( 4 Nos ) for each bed after removing the existing ones all as per drg complete all as specified and as directed. |
| 51 | REPAIR TO CHAIR WRITING STEEL MAP (FD/E6/MAP/01) |
| 52 | M&L for removing the old unserviceable back of Chair Writing Steel & S&F of new back of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws 4mm thick alongwith washers as per sample approved all as per drg complete all as specified and as directed.Make:- as approved by Engr-in-Charge |
| 53 | M&L for removing the old unserviceable seat of Chair Writing Steel & S&F of new seat of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 54 | M&L for removing the old unserviceable handle / armrest of Chair Writing Steel & S&F of new handle of same size made of black integral skin polyurethane with reinforced MS insert and shall be back fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 55 | M&L for removing the old unserviceable Cantilever type MS tubular frame of Chair Writing Steel & S&F of new frame of same size and shall be back fixed to the Chair writing steel as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 56 | REPAIR TO CHAIR VERANDAH (FD -19 M/ FD-359) |
| 57 | M&L for Re-canning of chair verandah after removing the existing cane and to carry out necessary welding and repairs wherever required and weaving with new white plastic cane of approved quality with 3.5 to 4mm wide half round type for seat and back and fixing 04 Nos of hard rubber shoe/PVC shoes for legs of 20 mm dia after removal of old existing /unserviceable shoes all as shown on drawing and as directed. Note:- Cane shall be of plastic strips of superior quality, type -I HDPE white or cream colour of uniform width conforming to IS-5387. |
| 58 | M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface and applying a coat of synthetic enamel paint of white colour or any other colour/combination of colours over a coat of primer complete as specified and directed. |
| 59 | REPAIR TO BOOK CASE STEEL LARGE (FD-1028) |
| 60 | M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Case Steel Large complete as specified and directed. |
| 61 | M&L for removing unserviceable/broken existing glass and S& F of new 5 mm thick glass and fitting with 1 mm MS sheet channel with roller for sliding doors all as specified in drwaing and as directed. |
| 62 | S&F 100 mm steel chromium plated handle after removing of old unserviceable handle as shown on drawing and as directed.Make:- Godrej or Equivalent as approved by Engr-in-Charge |
| 63 | REPAIR TO TEAPOY VARANDAH (FD-255, FD/E6/MAP/17) |
| 64 | M&L for Removing old unserviceable Top and S&F of new top made out of pre laminated particle board 18 mm exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing. |
| 65 | M&L for removing existing paint and preparing the surface after applying putty and a coat of primer and Painting of Teapoy verandah with two coats of synthetic enamel paint (1st grade quality) white colour with glossy finish by spray machine and Supply and Fix of new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete as specified and shown on drawing and as directed. |
| 66 | RACK STEEL 6 TIER FD-1034/1038/129(M) |
| 67 | M&L for removing dents and bends and existing paint and preparing surface by applying putty and a coat of red primer and applying a coat of Synthetic Enamel paint of Olive Green colour or any other colour as specified and as directed. |
| 68 | M&L for removing old /unserviceable Shelf and S & F of new shelf made out of 1 mm MS sheet to the required shape as per drawing and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces as directed. |
| 69 | REPAIR TO TABLE STEEL 900X600X760 MM WITH & W/O DRAWER (DRG NO FD-1007/HFD-2014/FD-1008):- |
| 70 | M&L for removing dents and bends and welding wherever required for Table w & w/o drawer steel.Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of Table w & w/o drawer steel complete(inside and outside) with a coat of synthetic enamel paint as approved all as per drg complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit. |
| 71 | M&L for Removing old unserviceable Top and S&F of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing. |
| 72 | M&L for Removing of old unserviceable locks and supply and fix of new brass locks with duplicate keys best quality all as per drg complete all as specified and as directed. |
| 73 | REPAIR TO CHAIR REVOLVING /COMPUTER MAP (TP, FD/E6/MAP/01) |
| 74 | M&L for removing the old unserviceable back of Chair computer & S&F of new back of same size made of 12 mm th hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws alongwith washers as per sample approved as specified and as directed. Make:- as approved by Engr-in-Charge |
| 75 | M&L for removing the old unserviceable seat of chair computer & S&F of new seat of same size made of 12 mm th hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws alongwith washers as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 76 | M&L for removing the old unserviceable Gas lifting hydraulic system of Chair computer & S&F of new hydraulic system of same size and shall be back fixed to the Chair Computer as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 77 | M&L for removing the old unserviceable handle / armrest of Chair computer & S&F of new handle of same size made of black integral skin polyurethane with reinforced MS insert and shall be back fixed to the rail with screws alongwith washers as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 78 | M&L for removing the old unserviceable wheel base of Chair computer & S&F of new wheel bases of same size and shall be back fixed to the Chair Computer as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 79 | 15.06 M&L for removing the old unserviceable castor wheels of Chair computer & S&F of new castors of same size and shall be back fixed to the Chair Computer as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 80 | REPAIR TO TABLE COMPUTER TP / FD/E6/MAP/03 |
| 81 | Top M&L for removing old unserviceable top of Table computer and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class teak wood edging all around complete as specified and shown on drawing and as directed. Make of Particle Board :- Eco Board/Bhutan Board /Novapan/Green Ply Industries Make of Hardwood :- Teak wood or equivalent as approved by Engr-in-Charge |
| 82 | Shelf M&L for removing old unserviceable shelf of Table computer and S&F of new shelf made of 18mm th pre laminated particle board as shown on drawing and as directed. Make of Particle Board :- Eco Board/Bhutan Board /Novapan/Green Ply Industries |
| 83 | Keyboard Tray M&L for removing old unserviceable Keyboard Tray of Table computer and S&F of new Keyboard Tray made of 18mm th pre laminated particle boardon telescopic channels as shown on drawing and as directed. Make of Particle Board :- Eco Board/Bhutan Board /Novapan/Green Ply Industries |
| 84 | Drawer M&L for removing old unserviceable Drawer of Table computer and S&F of new Drawer made of 18mm th pre laminated particle board on telescopic channels as shown on drawing and as directed. Make of Particle Board :- Eco Board/Bhutan Board /Novapan/Green Ply Industries |
| 85 | Nylon Buffers M&L for removing old unserviceable/ broken Nylon Buffers of Table computer and S&F of new Nylon Buffers provided on each legs as shown on drawing and as directed. |
| 86 | CHAIR CB STEEL WITH/ WITHOUT ARMS (FD-75M)/120(M) :- |
| 87 | M&L for Taking down carefully existing unserviceable seat frame and S & F new seat frame made out of 2nd class hard wood duly caned with white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 and applying two coat of black French polish with glossy finish over wood filler on all exposed new wooden surfaces after preparation of new wooden surface complete before canning complete all as shown on drawing all as per drg complete all as specified and as directed. |
| 88 | All as per item No 17.01 but back frame, complete all as per drg complete all as specified and as directed. |
| 89 | Taking out all unserviceable/damaged hand rest from its position and S & F new hand rest made out of 20 mm thick teak wood plank in one piece on hand rest and applying two coat of black French polish with glossy finish over wood filler on all exposed new wooden surfaces after preparation of new wooden surface complete over a coat of primer before canning complete all as shown on drawing as specified and directed. |
| 90 | S & F new mild steel cleats of flat iron size 25x3mm with drilling holes for fixing with MS screws to seat and back frame of each chair frame to support to seat/back wooden frame including applying two coats of synthetic enamel OG/Grey paint over a coat of red oxide primer all as directed Complete all as specified and as shown on drawing and as directed. |
| 91 | M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface and applying a coat of synthetic enamel paint of black/olive green colour or any other colour/combination of colours complete all as per drg complete all as specified and as directed. |
| 92 | REPAIR TO TABLE BED SIDE MAP FD/E6/MAP/15 |
| 93 | Top M&L for removing old unserviceable top of Table Bed Side MAP and S&F of new top 450mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked complete as specified and shown on drawing and as directed. |
| 94 | Side M&L for removing old unserviceable side of Table Bed Side MAP and S&F of new side 500mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked complete as specified and shown on drawing and as directed. Make of Particle Board :- Eco Board/Bhutan Board /Novapan/Green Ply Industries Make of Hardwood :- Teak wood or equivalent as approved by Engr-in-Charge |
| 95 | Back M&L for removing old unserviceable back of Table Bed Side MAP and S&F of new back made of 6 mm thick commercial BWR plywood 450mm x 450mm complete all as per drg complete all as specified and as directed. |
| 96 | Drawer M&L for removing old unserviceable drawers upper and lower for Table Bed Side MAP and S&F of new drawer made of 12 mm thick commercial BWR plywood 450mm x 450mm x 100/350mm with 6 mm thick commercial BWR plywood at the base 450mm x 450mm complete all as per drg complete all as specified and as directed. |
| 97 | M&L for Painting Preperation of old painted steel surfaces and applying two coats of synthetic enamel paint including providing of rubber shoes to Table Bed Side MAP complete as specified and shown on drawing and as directed. |
| 98 | Handles M&L for removing old unserviceable handles and S& F of new handles for drawers for Table Bed Side MAP complete as specified and shown on drawing and as directed |
| 99 | REPAIR TO CHAIR EASY STEEL FD-121(M)/358 |
| 100 | M&L for removing the old unserviceable back of Chair Easy Steel & S&F of new back of same size made of 12 mm hot pressed plywood upholstered with rexine/leatherette fabric and moulded polyurethane foam of 32 density 50 mm thickness stiched all around with welding of mettallic rail structure where required and shall be fixed to the rail with screws alongwith washers as per sample approved as specified and as directed. Make:- as approved by Engr-in-Charge |
| 101 | M&L for removing the old unserviceable seat of Chair Easy Steel & S&F of new seat of same size made of 12 mm hot pressed plywood upholstered with rexine/leatherette fabric and moulded polyurethane foam of 32 density 50 mm thickness stiched all around with welding of mettallic rail structure where required and shall be fixed to the rail with screws alongwith washers as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 102 | M&L for removing the old unserviceable handle / armrest of Chair easy Steel & S&F of new handle of same size made of 2nd class wood and shall be back fixed to the rail with screws 4mm thick alongwith washers as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 103 | M&L for removing the old unserviceable Cantilever type MS frame of Chair easy Steel & S&F of new frame of same size and shall be back fixed to the Chair easy steel as per sample approved as specified and as directed.Make:- as approved by Engr-in-Charge |
| 104 | M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface and applying a coat of synthetic enamel paint of Black/Olive green colour or any other colour/combination of colours complete as specified and directed. |
| 105 | REPAIR TO CHAIR VISITOR - Make: SUPREME ORNATE |
| 106 | M&L for removing the old unserviceable back cover of Chair visitor & S&F of new back cover as per sample approved all as per drg complete all as specified and as directed. |
| 107 | M&L for removing the old unserviceable tapestry and moulded cushion from seat of Chair Visitor & S&F of new moulded cushion of 30 density and new tapestry cloth as per existing shape and shall fix to the frame with screws alongwith washers as per sample approved all as per drg complete all as specified and as directed. Please Enable Macros to View BoQ information |
