|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Cleaning of blocked floor/nahani trap of kitchen, bathroom, wash hand basin and gullly trap etc up to Ist manhole and disposal of waste materials to a distance n.exc 50 m complete all as specified and directed. |
| 3 | Taking up of existing covers of septic tank of any size and cleaning of same including dewatering and digging out sludge, mud state and removing the sludge to a distance exc 250 m and n.exc 500 m where directed by the Engineer -in-Charge, cleaning of inlet and outlet pipes and placing the cover in position complete all as specified and directed. Note: The measurement for payment shall be taken in cum by computing the inner size of tank and actual depth of existing sludge/mud etc. |
| 4 | Cleaning of manholes of any size and depth up to 2.00 mtrs under foul condition by removing MH covers, removing of accumulated liquid, sludge/sediments, transporting the fluid/sludge etc in covered containers and depositing the same out side the camp area/ defence land, cleaning of the manhole with fresh water, placing MH cover back in intact position complete all as specified and directed. |
| 5 | Cleaning of sewage line (any bore) including affected manholes and disposal of waste materials / spoils upto a distance of 250 mtrs by any means (mechanical / manual) including washing out manhole and sewage line and disposal of waste / sludge in pits complete all as specified and directed. |
| 6 | Cleaning and removing individual blockage in IWC/EWC and removing sludge and foreign materials completely, neatly and making serviceble for free flow all as specified and directed. |
| 7 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in any type of soil complete all as specified. |
| 8 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick with soil obtained from excavation complete all as secified and directed. |
| 9 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as spcecified and as directed. |
| 10 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 pipe section in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required for 100 mm bore pipe complete all as specified and directed. |
| 11 | M&L for HDPE Double Wall Corrugated pipe 150 mm internal bore laid in trenches & jointed as specified, and including demolition and breaking up drain pipes, complete all as specified and directed. |
| 12 | M&L for concrete bed of PCC 1:4:8 type D2 using 40 mm graded stone aggregate for 150mm dia. drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete as specified |
| 13 | S & F in repairs, 110 mm bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints complete all as specified and directed. |
| 14 | S & F in repairs, 110 mm bore PVC (SWR) pipes, single socketed, laid in trenches or in floors in any length with rubber ring joints complete all as specified. |
| 15 | S & F in repairs, 75 mm bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints complete all as specified and directed. |
| 16 | S & F in repairs, 110 mm bore PVC (SWR) bends (any radius), diminising pieces or tapers (large bore measured) all as specified and directed. |
| 17 | S & F in repairs, 75 mm bore PVC (SWR) bends any radius, diminising pieces or tapers (large bore measured) all as specified and directed. |
| 18 | Uprooting of vegetation growth from walls, roof chajja gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 Sqm rate include up to 2 stories all as specified and directed. |
| 19 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. |
| 20 | M & L for chequered cement concrete tiles 30cm x 30cm x 25 to 30mm thick (Glossy finished) with grey cement and pigment, over and including 20 mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed. |
| 21 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour ( Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 22 | M & L in repair for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and directed. |
| 23 | M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc, complete all as specified and directed. |
| 24 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed. |
| 25 | M&L brick work with Sub Class 'B' bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed. |
| 26 | Taking down cement plaster of any description on brick or stone walls, ceiling etc including rakking out joints , hacking for key , scrubbing down with water at any height etc all as specified and as directed. |
| 27 | M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete, etc. all as specified and as directed. |
| 28 | M & L rendering 15 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:4 surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding ccomplete all as specified and directed. |
| 30 | M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, including dismantling of floor hearth,wall tiling etc complete all as specified and directed. |
| 31 | Demolition of reinforced cement concrete as in manhole covers and the like complete all as specified and directed. |
| 32 | M & L for precast reinforced cement concrete (1:2:4) type B1 (Using 20mm graded stone aggrgate) as in landings, cover slabs (for manholes, drains etc), chajjas, water troughs mangers, shelves and similar articles with plain faces, set in cement mortar (1:4) complete all as specified and directed. |
| 33 | M & L for TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 34 | M&L for run lead joints for 80 mm nominal bore cast iron pipe by burning old U/S lead and providing new lead including spun yarn caukling necessary earth work for pipe and removing water / mud complete all as specified . |
| 35 | All as per Item No 33 above but for 100 mm nominal bore. |
| 36 | All as per Item No 33 above but for 150 mm nominal bore. |
| 37 | All as per Item No 33 above but for 200 mm nominal bore. |
| 38 | M&L lead wool joints for 80 mm nominal bore cast iron pipe by removing old U/S lead wool and providing new lead wool including spun yarn caukling necessary earth work for pipe and removing water / mud complete all as specified . |
| 39 | All as per Item No 37 above but for 100 mm nominal bore. |
| 40 | All as per Item No 37 above but for 150 mm nominal bore. |
| 41 | All as per Item No 37 above but for 200 mm nominal bore. |
| 42 | Taking out UNSV CI sluice valve 200 mm dia from water mains including burning out run lead joints and turning water on or off or on and draining the system completely and stacking the stores in store yard as directed by Engr in-charge |
| 43 | All as per items No 41 above but 150 mm dia |
| 44 | All as per items No 41 above but 100 mm dia |
| 45 | S&F cast iron body sluice valve of 200 mm dia with SS spindle and checknuts with iron wheel flanged type hole and drilled heavy duty ISI marked class PN 1.6 including rubber insertion 3 mm thick nut bolts gasket washer etc. complete all as specified and as directed. |
| 46 | All as per item No 44 above but 150 mm dia pipe |
| 47 | All as per item No 44 above but 100 mm dia pipe |
| 48 | Cleaning of overhead water reservoir (inner sides) of capacity 1,00,000 gallons ,upto 18 Mtr height , removal of complete sand and sludge growth deposite, cleaning of inner surfaces making it free rust and algee growth by scrapping and washing with water including following treatment :-(a) The inner surfaces with two coats of lime wash (b) Two coats of painting (synthetic enamelled paint ) on steel surfaces pertaining to iron /MS structure such as ladder inside the door and MS cover (c) Two coat of black bituminous over a coat of red oxide on the entry side of the reservoir. (d) Removing algae & fungus grwoth on overhead reservoir (outer side)comp including piller by scrapping and filling pitholes by using suitable material and painting by snowcem to comp over head tank as directed by Engr-in-charge. Note :- The rate is deemed to be all type of scaffolding and T&P. |
| 49 | All as per item No 47 above but OHT /reservoire of RCC 50000 Gallons capacity |
| 50 | All as per item No 47 above but OHT /reservoire of RCC 25000 Gallons capacity |
| 51 | M&L for lifting of submersible pumpsets upto 45 HP from borewell complete with delivery pipe approx upto 200 feet from ground level including use of all T&P chainpully block tripod etc with any disturb condition of pump set as directed by Engr-in-charge |
| 52 | M&L for Lowering of submersible pumpsets upto 45 HP into bore well complete with delivery pipe approx upto 200 feet deep from ground level including use of all T&P chain pully block tripod etc with testing on completion all as directed by Engr-in-charge |
| 53 | Dismantling of complete submersible motor capacity 45 HP and taking out burnt winding wire and rewinding the same with using the suitable existing size of approved quality super enemelled copper winding wire with complete insulation material and refitting the motor and assembling , testing on load complete |
| 54 | Dismantling of complete unserviceable submersible pump capacity 45 HP and replacment of following unserviceable parts and refixing the same including testing on full load complete |
| 55 | Stage bowl assembly with necessary bushing and studs with nuts complete |
| 56 | Thrust bearing with TB Washer |
| 57 | Impeller neck ring of gunmetal |
| 58 | Impeller of GM |
| 59 | Coupling stud with checknut of SS |
| 60 | Impeller key of SS |
| 61 | Upper and lowering bushing |
| 62 | Sand guard of SS |
| 63 | Cable guard |
| 64 | Supply only neela thotha ( Copper Sulphate crystal) for swimming pool. |
| 65 | Supply only alum for treatment in swimming pool |
| 66 | Supply only Graphite Gland packing rope (gland dori)10 mm dia |
| 67 | Supply only Hydrated lime |
| 68 | Machining of submersible motor and pump shaft by means of filling the gap by means of welding and machining work the same by means of lathe maching throughing shaft ,alignment complete |
| 69 | S&F in replacement PVC insulated and sheathed multi stranded copper conductor cable flate 3 core of 25 sq mm for submersible pump/starter of make Finolex/Havells /RR Cable |
| 70 | Repair/replacement of SS Steel spindle complete for 150 mm dia slluice valve with brass checknuts of suitable size as per existing and taking out old one as specified and directed. |
| 71 | All as per item ser No 69 above but 100 mm dia |
| 72 | All as per item ser No 69 above but 80 mm dia |
| 73 | S& F in repairs of MS Flange with 08 Nos of hole suitable for 150 mm dia bore pipe with necessary welding to circumference of the pipe on both ends. |
| 74 | S& F in repairs of MS Flange with 08 Nos of hole suitable for 100 mm dia bore pipe with necessary welding to circumference of the pipe on both ends. |
| 75 | S& F in repairs of MS Flange with 08 Nos of hole suitable for 80 mm dia bore pipe with necessary welding to circumference of the pipe on both ends |
| 76 | S& F in repairs MS bolts with nuts of size 12 mm dia and 100 mm long with two nos washer for each bolts complete. |
| 77 | S & F in replacement DOL starter three phase type MK1 440V, 15 Amp suitable for 5 HP monoblock pump all as directed by Eng in charge. |
| 78 | Supply and fix in replacement foot valve of 80 mm dia plunger typeof brass complete all as directed. |
| 79 | Dismantlling and repairing of radiator of DG Set of 63-100 KVA by brazing soldering and clleaning of fine and descaling of tubes , replacement of house pipe set with new one with & including clamps ,refixing in original position and tested complete all as directed by Engr -in-Charge. |
| 80 | S& F in repairs fuel baby filter suitable for 63/100 KVA DG Set complete all as directed. |
| 81 | S&F in repair of Diesel Filter with O ring of Mico for 63/100 KVA DG Set complete all as directed. |
| 82 | S&F in repair of oil filter with O ring of mico for 63/100 KVA DG Set complete all as directed. |
| 83 | S&F in repair of Air Filter with O ring of Mico for 63/100 KVA DG Set complete all as directed. |
| 84 | Supply only Engine oil type SAE 15W40 C14 required for servicing DG Set. |
| 85 | S& F in repairs rubber gasket for flanged joint 80 mm |
| 86 | S& F in repairs rubber gasket for flanged joint 100 mm |
| 87 | S& F in repairs rubber gasket for flanged joint 150 mm |
| 88 | M&L for rewinding of Motor upto 5 HP and taking down for repair and carry workshop for machining and refixing the motor at same place after repair including testing all as directed by Engr-in charge. |
| 89 | M&L for taking down the monoblock pump from Motor and servicing the same including turning and fitting and removing the worn out parts such as bushes , bearings and coupling etc and refixing the same in its original position including testing and commissioning all comp all as directed by Engr -in-charge. |
| 90 | S& F MS column pipe of size 100 mm dia bore claas C heavy duty confirming to IS 3589 (1981) thickness 6.0 mmwith both ends flanged of 08 Nos Hole fitted with welding at circumference of the pipe all as specified and directed. Note:- Also includes lifting of column pipe alongwith lowering from borewell. |
| 91 | Material and labour for testing of borewell water both chemical & bacteriological by taking a sample from the desired point and packed into a approved sterilized water bottle properly sealed and signed and sending to the authorised Govt lab monthly and submitte the report to this office in original for our record as directed. the test Parameters are given below:PH, TDS, Turbidity, Residual free chlorine, Total hardness, Chloride, Total Alkanity, Total Coliform, E. coli, Taste, Colour, Odour, Nitrate, Sulphate, Fluoride, Aluminium, Arsenic, Chromium, Copper, Cadmium, Calcium, Magnesium, Manganese, Lead, Zinc, Sodium, Potassium, Iron.Note: the contractor must give sample receipt of govt lab with tax invoice to this office within two days of sample collection to this office, |
| 92 | S&F pressure gauge oil filled 100 mm size dia dial range 0 to 12 Kg /Cm inch , complete all as directed |
| 93 | M & L for construction of brick masonry valve pit of size 950 X 950 X 950 mm (outer dimensions) with excavation & earthwork in any type of soil, brick work of fly ash old size bricks built in cement mortar 1:4, PCC 1:2:4 type B-1 as in foundation concrete, bed/floors, coping and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces, external plaster shall be upto 15 cm below GL and mixed with water proofing compound @ 2% by weight of cement with and including 40 mm X 40 mm X 6 mm mild steel angle iron frame, 3.15 mm thick mild steel sheet cover with appropriate size lifting handles and locking arrangement and 01 No. 50 mm size 4 levers lock with keys in duplicate make Navtal including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawings and as directed. |
| 94 | M & L for construction of brick masonry valve pit of size 800 X 800 X 800 mm (outer dimensions) with excavation & earthwork in any type of soil, brick work of fly ash old size bricks built in cement mortar 1:4, PCC 1:2:4 type B-1 as in foundation concrete, bed/floors, coping and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces, external plaster shall be upto 15 cm below GL and mixed with water proofing compound @ 2% by weight of cement with and including 40 mm X 40 mm X 6 mm mild steel angle iron frame, 3.15 mm thick mild steel sheet cover with appropriate size lifting handles and locking arrangement and 01 No. 50 mm size 4 levers lock with keys in duplicate make Navtal including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawings and as directed. |
| 95 | Supply, commissioning, installation & testing in replacement of Fully automatic Star Delta Starter suitable for submersible pump motor set 3 Phase 415 Volt fitted on sheet steel enclosure with following specification:a. MNX 80 3 Pole power contactor with front mounting aux contact block 2NC+2 NO- 02 Nos (make: L&T cat no.CS97077)b. MNX 50 3 Pole power contactor with front mounting aux contact block 2NC+2 NO- 01 Nos (make: L&T cat no.CS97075)c. Single phase preventor type VSP 2- 01 Nosd. Electronic timer 0-60 sec- 01 Nose. Relay with range 45-75 Amps- 01 Nosf. on/off push buttons - as requiredall the contactors should be wired with 35sqmm Copper cable with copper lugs & all aux connections should be done with suitable size copper FRLSH wire. spreader link kit is included in unit rate. |
| 96 | Supply & fixing in replacement of heavy duty battery 12 Volt, 180AH Make : Exide/luminous/Amaron complete all as specified. (Note:- Old unsv battery to be deposited in MES Store yard for keeping in safe custody.) |
| 97 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board/DG Set (Approx length of GI strip from earth plate to DG set 5 Mtrs) as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1, pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion . (Concrete pit shall be 20 cm to 30 cm away from main pit). |
| 98 | Cleaning of Valve pit chamber of size 1m x 1m x 1m at various location of Water supply area including removal of stored water, silt, sand and debris complete all as specified and direccted by Engr-in-charge. Please Enable Macros to View BoQ information |
