|
| 1 | Note:A) Removing of following existing unserviceable steel components of various MES F/DB/FD furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges,denting, applying putty for levelled surface, placing every part in-tact and painting the disturbed portion, as applicable as per drgs. B) Work will be executed at BSO's Furniture Yard as directed by Engineer-in-Charge. Make : - All Pre laminated MDF should be used of Century ply, Kit ply,Green ply and Nova Pan with teakwood beading and Plywood should be used of National ,Century ply, Kit ply, and green, PVC Seat of Chair varandah and chair dining should be used AMKO or as sample approved by GE and Mirror should be used Modi Guard/ Saint Gobain/ Atul.All cushion Foam should be used of Cool Foam/ Sleep well/ Kurl on with Tapestry cloth as per sample approved by GE |
| 2 | Sofa Set Three seater /04 / 05 seaterFD 281, 373, FD /MAP/II/02, FD/MAP/06 |
| 3 | Removing of existing U/S sofa cushion of size 21\\" x 22 \\" and Supply & fixup new seat & back cushion made out of 100 mm thick high 32mm density form duly stich with innner cloth and superior quality tapestry cover duly zipped. |
| 4 | Top long rail as per drg |
| 5 | Middle stiffner for back and seating as per drg |
| 6 | Long Rail for Three Seater |
| 7 | Short /Side Rail for sofa set 3/ single seater |
| 8 | Removing of existing ply/ railing (back )of sofa and supply & the new ply as per drg |
| 9 | Removing of existing ply/ railing (seat )of sofa and supply & the new ply as per drg |
| 10 | Charpoy Ply Top GI pipe FD-220 |
| 11 | Removing of existing unserviceable plywood from the converted GI charpoy ply top and supply and fixing of new 12mm plywood BWR grade ISI Marked . |
| 12 | S&F Three-way elbow as per drg |
| 13 | Converting and Cutting of short rail from the retairved long rail |
| 14 | Converting & Cutting of leg from the retrived materials from short rail |
| 15 | Welding pt as required & directed |
| 16 | Almirah Steel Medium FD- 1032 |
| 17 | 3-Way locking system for almirah large as per drg |
| 18 | Handle as per drg |
| 19 | MS Lock |
| 20 | Chair VarandahFD/MAP-II/06 |
| 21 | Replacement of PVC Sheet for Seat & Back |
| 22 | Welding of joints of legs frames etc wherever required and directed by Engineer In Charge |
| 23 | PVC Shoes as per exisitng & Drg |
| 24 | Chair School CBA with hand BdFD/E6/MAP/05 |
| 25 | Hand board made of MDF board Borad with PVC beading as per drg |
| 26 | PVC Seat in blue colour as per drg |
| 27 | All joints, fixing shall be done in accordance with standard specifications |
| 28 | Charpoy IP Hard TopFD E6 / MAP II/01 |
| 29 | 12mm BWR grade thick ISI Marked plywood as per size and drg |
| 30 | PVC Shoes as per exisitng & Drg |
| 31 | Welding the joints including black painting the welded parts to match with existing |
| 32 | Table Bed Side MapFD/E6/MAP/15 |
| 33 | Top as per drg made up of 18mm thick MDF |
| 34 | Sides as per drg made out 18mm thick MDF |
| 35 | Back as per drg made out of 6mm commercial ply |
| 36 | Upper Drawer Made of 12mm comercial ply and front shall be 18mm MDF |
| 37 | Lower drawer Made out of 12mm Thick Commercial Ply and front shall be of 18mm thick MDF |
| 38 | Handle as per sample approved by the Engineer-in-charge |
| 39 | Rubber Shoe |
| 40 | Chair Dining FD/MAP-II-05 |
| 41 | Bottom Stiffner as per drawing |
| 42 | Replacement of PVC Seat as per existing |
| 43 | Chair Writing MAPFD/E6/MAP/12 |
| 44 | To Replace the only Tapestry cloths of seat & Back |
| 45 | To Replace the cushion and tapestry cloth of seat |
| 46 | To Replace the cushion and tapestry cloth of Back |
| 47 | Handle as per drg |
| 48 | Welding the joints including black painting the welded parts to match with existing |
| 49 | Peg TableFD/MAP/11 |
| 50 | Table Top 18mm thick MDF with teakwooden beeding |
| 51 | Short rail as per drg |
| 52 | Long rail as per drg |
| 53 | PVC Ring/ Shoe as per drg |
| 54 | Table Dining for 04 pers 1200x900mm FD/MAP-II/03 |
| 55 | Top with 18mm thick MDF with teak wooden beeding |
| 56 | Short Rail as per drg |
| 57 | Long Rail as per drg |
| 58 | Table Dressing Gents with Mirror MAP FD/E6/MAP/16 |
| 59 | Mirror as per existing Size and as per Drg 5mm thick |
| 60 | Back ply as per drg |
| 61 | Steel Hinges 75mm long |
| 62 | Glass shelves 5mm thick supported on runner / glass holder |
| 63 | Magnetic Catcher |
| 64 | A) M&L for Painting of two coat of paint as per directed by Engr in Charge to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying putty for depressed surface before painting all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed at BSO's Furniture Yard as directed by Engineer-in-Charge. |
| 65 | Charpoy GI pipeFD-220 |
| 66 | Almirah Med SteelFD 1032 |
| 67 | Chair VarandahFD/MAP-II/06 |
| 68 | Chair School CBA with hand BdFD/E6/MAP/05 |
| 69 | Charpoy IP Hard TopFD E6 / MAP II/01 |
| 70 | Table bed side MapFD/EL/Map/15 |
| 71 | Rack Shoe Steel MAPFD/E6/MAP/02(R) |
| 72 | Chair Writing MAPFD/E6/MAP/12 |
| 73 | A) M&L for french polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed at BSO's Furniture Yard as directed by Engineer-in-Charge. |
| 74 | Sofa set 04 SeaterFD 281,373 |
| 75 | Sofa Set 05 SeaterFD 281,373, FD/E6/MAPII/ 02 |
| 76 | Peg TableFD/MAP/11 |
| 77 | Table Dinning 4 PersFD/MAP-II/03 |
| 78 | Table Dressing Gents with Mirror MAP FD/E6/MAP/16 |
| 79 | Note:- Schedule of Credit will be taken over in salvage ledger as scrap Please Enable Macros to View BoQ information |
