|
| 1 | Taking down chowkats or frame with shutter n.exc 1.50 Sqm each (without taking off shutter from the frame/ chowkats) complete all as specified and directed. |
| 2 | All as per Srl item No 01 above but exc 1.50 sqm but n.exc 4.00 Sqm. |
| 3 | Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm. |
| 4 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but n. exc. 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match, over and including 15 mm thick screed bed in cm 1:6 including dismantling floor hearth or wall tilling including taking down cement mortar bedding and removing rubbish off premises complete all as specified and as directed. |
| 5 | M&L for non skid dark ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 incl taking down floor hearth or wall tilling including cement mortar bedding removing serviceable tile to store and rubbish off premises complete all as specified and as directed. |
| 6 | M&L for non skid dark ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 including taking down floor hearth or wall tilling including cement mortar bedding, removing rubbish off premises complete all as specified and as directed. |
| 7 | M&L for vitrified ceramic tiles, light shade 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm 1:6 complete incl demolition tiles and CM bedding, removing, rubbish off the premises all as specified and directed. |
| 8 | All as per Srl item No 7.00 above but on vertical but over 10 mm thick rendering in CM 1:4 incl dismantling tiles and CM bedding complete all as specified and directed |
| 9 | M&L for ceramic glazed dark shade coloured tiles of size 450x350x7mm thick joint free on and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado including dismantling floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and as directed. |
| 10 | M&L for granite (of any type) work (table rubbed and polished), 16 to 18mm thick, in steps, jambs, pillars, window - cills, cooking plate forms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl demolition of existing stone slab/tiles of any description or thickness in floors, aprons etc laid in CM all as specified and directed. |
| 11 | Demolition of PCC of any description and in any position not otherwise described complete all as specified and as directed. |
| 12 | M&L for water proofing treatment to sunken floors of toilets, laboratories, bath, WCs, kitchen etc as under:- (i) Application of two component acrylic modified cementitious coating :- (a) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates shall be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance existing coating and achieve a gripping profile that is clean, dry and free from laitance and any other from of surface containmation. The installation instruction in manufacturer's published literature shall be strictly complied with, including but not limited to the following:- (b) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Cleaning of cracks & filling with SIKA latex SBR 100 putty/Dr. Fixit 302 SBR latex/ perma latex SBR/FOSROC Nitbond SBR latex/Asian paint latex as required. Final cleaning of surface with powder grinder, wire brush, hair brush & vacum pressure. (c) Providing protection concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), 50mm thick admixed with plastocrete over the applied water proofing coating on horizontal surfaces.(Admixture: Sikaplastocrete plus/FOSROC/Dr. Fixit/STP/CICO confirming to IS 2645.) (d) Dampen all surface immediately ahead of apllication of acrylic modified cementitious coating of SIKA top seal-107/Brush bomd FOSROC/Dr. Fixit/STP/CICO. (e) Whilst the surface is still damp from saturation (SSD) apply one coat of acrylic modified cementitious coating of SIKA top seal-107/ Brush bond FOSROC/Dr. Fixit/STP/ white first coat is wet. |
| 13 | (f) Apply glass fabric sheet as per manufacturer instructions while the first coat is wet. (g) Once touch dry, apply second coat of acrylic modified cementitious coating of viscosity as per manufacturer ins on the entire area. Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (h) The waterproofing coating shall be taken to a height minimum 300mm above the finished floor level on the vertical surface. (j) Curing acrylic modified cementitious coating immediately after application (min 6-8 hrs drying) for a min of 3 to 5 days to ensure full cement hydration and to minimize cracking. (k) A protection plaster (15mm thick) in ready mix mortar to be a apllied on the walls. (l) All the corners and joints shall be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansion zone in the centre of make seal tape SIKA/FOSROC/Dr. Fixit/STP. (m) The membrane has to be protected in accordance with the manufacturer's recommendation until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and carryout repairs in accordance with manufacturer's instructions. (n) Water proofing treatment shall be carried out through authorised applicators. |
| 14 | (o) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (p) All CI/PVC Traps in sunken slabs to be enclosed with PCC 1:1.5:3 (using 20mm graded crushed stone aggregate) (min 15cm) all arround). (q) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) (r) Providing drainage spout pipe GI 40mm dia light grade upto outside of outer wall (Approx 300 mm to 450 mm long) incl cutting to existing wall and making good the distrubed surface complete all as specified and directed. (s) Providing 25mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in flooring for laying floor finishes all as specified. Note:- Item Nos (q), (r) and (s) shall be measured and paid seperately. |
| 15 | M&L for PCC 1:5:10 type F2 (using 40mm graded crushed stone aggregate) as in filling foundation and mass concrete in sunken floor complete all as specified and directed. |
| 16 | M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base for complete all as specified. |
| 17 | S&F 32mm bore medium grade GI tubing used as spout pipes complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor complete all as specified. |
| 19 | M&L for removing existing treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/cracksand enhance the adhesion of the coating. • Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 Hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 Hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years . (Note : Application of water proofing treatment will be done by Authorised Applicator only). |
| 20 | Disconnecting existing tanks of capacity 500/1000 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position including taking up and down GI pipe and refixing incl cleaning complete all as specified. |
| 21 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 22 | M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base for receiving the floor finishes including demolition of existing complete all as specified and as directed. |
| 23 | M&L for rendering 12mm thick with ready mix mortar of approved makes on brick or concrete surfaces of walls, finished surface even and fair including taking down cement plaster of any description complete all as specified and directed. |
| 24 | M&L for rendering 5mm thick with ready mix mortar of approved makes on brick or concrete surfaces of walls, finished surface even and fair including taking down cement plaster of any description complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick with ready mix mortar of approved makes on brick or concrete surfaces of walls, finished surface even and fair including taking down cement plaster of any description complete all as specified and directed. |
| 26 | M&L for preparation of new plastered surface and applying two coats of cement base paint complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surface of ceiling and applying two coats of white wash complete all as specified and directed. |
| 28 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade) on walls over primer complete all as specified. |
| 29 | M&L for preparation of old surfaces of existing treatment and applying one coat of cement based paint on wall complete all as specified and directed. |
| 30 | M&L for one coat of OBD (Acrylic) on old decorated wall surface including preparation of surfaces complete all as specified and directed. |
| 31 | M&L for preparation of new wooden surface exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 32 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 33 | M&L for prepartion of old painted surface of wood & wood based surfaces of any decsription not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 34 | All as per Srl item 31 above but on steel /iron surfaces |
| 35 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 36 | S&F powder coated aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 37 | S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0 (using 12.5mm graded crushed stone aggregate) as in filling of pressed steel frames including one shop coat of priming and two coats of synthetic enamel paint complete all as specified and as directed . |
| 38 | S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0(using 12.5 mm graded crushed stone aggregates) as in filling of pressed steel frames including one shop coat of priming and two coats of synthetic enamel paint complete all as specified and as directed . |
| 39 | S&F factory made solid panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 40 | S&F 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed. |
| 41 | S&F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed |
| 42 | S&F aluminium anodized barel tower bolt of extruded section 150mm long (ISI mark) complete all as specified and directed. |
| 43 | S&F aluminium alloyed handle cast type anodized of size 150mm long (ISI mark) complete all as specified and directed. |
| 44 | S&F butt hinge medium weight cold rolled mild steel 100mm size |
| 45 | S&F in repair 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/bolts/ screws in metal/wooden frame complete all as specified and directed. |
| 46 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete |
| 47 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty or fixed with beads. |
| 48 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed. |
| 49 | S&F in repair 4mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed. |
| 50 | S&F figured glass pin headed type glazing with oil puty glass 3mm thick, fixed with oil puty in square n exe 0.5 Sqm in each pane complete all as specified and directed. |
| 51 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed. |
| 52 | S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of priming and two coats of synthetic enamel paint and taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately |
| 53 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including one shop coat of priming and two coats of synthetic enamel paint including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, shall be measured and paid for separately |
| 54 | S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and as directed. |
| 55 | Taking up and down GI pipe 15mm bore including fittings, connection omplete all as specified and as directed |
| 56 | Taking up and down GI pipe 20mm bore including fittings, connection omplete all as specified and as directed |
| 57 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked omplete all as specified and as directed |
| 58 | All as per Srl item No 55.00 above but fixing only (old serviceable pipe re-used including cleaning for reuse) |
| 59 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked omplete all as specified and as directed |
| 60 | All as per Srl item 57.00 above but fixing only (old serviceable pipe re-used including cleaning for reuse). |
| 61 | S&F rotational moulded polyethylene 3-layer water storage tank of 500 ltr capacity, white (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable tank all as specified & directed. |
| 62 | S&F in rotational moulded polyethylene water storage tank, (cylindrical vertical with closed top) white of 1000 ltrs capacity, three layers, fixed in position all as specified in SSR Part-I including one 20mm bore ball brass valve high pressure with polythene float and flynut incl disconnecting and domolition existing old tanks complete all as specified and directed. (Note: PVC tank shall be ISI marked). |
| 63 | S&F in repair bib taps 15mm dia cast copper alloy chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | S&F in repair for 15mm bore angle stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed. |
| 65 | S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed. |
| 66 | S&F in repair brass CP shower rose 125mm size with swivel joint fancy type complete all as specified and directed. |
| 67 | S&F 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 68 | S&F in repair CP brass towel rail `D’ type 60 Cm long fixed to wall complete all as specified and directed. |
| 69 | S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor complete all as specified and directed. |
| 70 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified and directed. |
| 71 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required |
| 72 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with integral foot rest with PVC `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 (using 40mm graded crushed stonge aggregate) complete all as specified (Note:- Flush pipe and flushing cistern to be measured and paid separately). |
| 73 | S&F in repair for vitreous China wash down water closet pan (pedestal pattern) white(EWC) (excluding flushing cistern and flush pipe) including plastic water closet seat white with jet, closed pattern with flat botton and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 74 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, brass CP urinal spreader complete all as specified and directed. |
| 75 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed |
| 76 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 77 | S&F in repair PVC low level dual flushing cistern 10 ltr capacity with syphonic action PVC float valve, brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 78 | S&F in repair vitreous china wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 79 | S&F in repair pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 80 | S&F in repair PVC waste pipe 32mm dia 800mm to 1000 mm long fixed to wash fitting of wash basin and sink complete all as specified and directed. |
| 81 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 82 | S&F in repair vitreous china coloured WC italian finish pedestal pan with attached vitreous china flushing cistern (monolithiic type) of push button type having dual flushing cistern of same colour including pvc seat cover same colour including brass Jet chromium plated with PVC connection 15mm bore complete all as specified and directed. |
| 83 | S&F in repair 600mmx450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 84 | S&F in repair PVC (SWR ) bends 110 mm bore any radius complete all as specified and directed. |
| 85 | S&F in repair PVC (SWR ) bends 75 mm bore any radius complete all as specified and directed. |
| 86 | S&F in repair PVC (SWR ) single junction (single T) 110mm bore equal or unequal. |
| 87 | S&F in repair PVC (SWR ) single junction (single T) 75mm bore equal or unequal. |
| 88 | M&L for PVC (SWR ) floor trap 100/75 mm plain with grating including jointing with solvent cement complete all as specified and directed. |
| 89 | S&F in reapir stack clamps for 110mm pipe out of 20x1.5mm galvanised mild steel flat and iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 90 | S&F in repair stack clamps for 75mm pipe out of 20x1.5 mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 91 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in shelves incl demolition complete all as specified and directed. |
| 92 | S&F for mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed |
| 93 | Use and waste of form work to soffits of shelves etc and similar items including edges, supports, overhangs etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 94 | M&L for flyash brick work straight or curved on plan exc 6m mean radius built with ready mix mortar incl demolition of brick work built in cement mortar complete all as specified and as directed . |
| 95 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floors to raise level complete all as specified. |
| 96 | M&L for 60mm thick M-35 grade pre cast machine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006 fixed with grey cement and no pigment, filling joints with sand, over and including 25mm thick sand filling including demolition of existing trile and screed all as specified and as directed. |
| 97 | M&L for vitrified designer, heavy duty tile of size 400mm x 400mm, 12mm thick, coloured, outdoor, set, jointed and pointed in neat cement slurry with white cement and pigment as in path/ floor, pattern of tile as approved by GE over and including 15mm thick CM (1:4) including demolition of existing tiles and screed complete all as specified and directed. |
| 98 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching, apex stone, bed plate, kneelers complete all as specified and as directed. |
| 99 | Taking down cement plaster /deteriorated concrete from bottom of RCC chajjas /RCC facia/RCC beam /RCC slab/brick work with necessary form work including raking out joints, hacking for key, scrubbing down with water and removing rubbish to a distance exceeding 50m but not exceeding 100 m away and M&L for 15 mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC chajjas & RCC facia complete all as specified & directed. |
| 100 | S&F in repair 7-8 mm thick PVC hollow wall panelling consisting of wood grain printed pvc sheet inclusive of solvant cement and fixing at site on PVC frame formed by sticking high density EPS, flame retardent (TF) grade, heavy duty with tipper strip weather proof, water proof, termite proof including all C and U type PVC section with matching of panelling fixing at border of panelling incl dismantling complete all as specified and directed by Engr-In-Charge. |
| 101 | S&F in reapir 3 mm thick aluminium composite panel (ACP) sheet for cover of faces of chajjas, columns,shaft etc. incl dismantling complete all as specified and directed. |
| 102 | M&L for decorative laminate1.5 mm type 1 of thickness surface finish (Sunmika), colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on and including 18 mm thick plywood grade BWR, Type BB for cupboard shutters including demolition of existing complete all as specified and as directed. |
| 103 | M&L for 4mm thick plywood, grade BWR type BB 3 ply fixed to cupbaord shutter with screws inc domolition of existing plywood complete all as specified and as directed. |
| 104 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed. |
| 105 | S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. Width of flaps (when open) 40 mm complete all as specified and directed. |
| 106 | S&F magnet catcher brass body of approved qualities 75mm size complete all as specified and directed. |
| 107 | S&F 150mm hasp and staple, aluminum anodized, safety type, with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 108 | S&F in repair of telescopic channels of stainless steel rollers for smooth sliding of drawers complete all as specified and directed. |
| 109 | S&F in repair knobs, 40mm dia, cup board knobs, fixed with nut, screw and washer of mild steel , bright finish complete all as specified and directed. |
| 110 | Demolition of framed timber scantlings 40 sqcm and over in section, in any position. |
| 111 | S&F for roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections, MS pipe,box tube etc) including distance pieces, cleats etc complete all as specified and directed. |
| 112 | S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw incl dismantling of existing sheet complete all as specified and directed. |
| 113 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 63,456/- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
