|
| 1 | B/R PORTION Excavating in post holes in any type of soil ( or similar hoels ) each n exc 0.5 cum getting out, returining filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50mtr. complete all as specified and as directed. |
| 2 | M&L cement concrete in foundation type C 2, 1:3:6 ( 40 mm grade stone aggregate) as in filling and mass concrete complete all as specified and as directed. |
| 3 | Excavation in trenches n.exe 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, and getting out in any type of soil as in foundation / M.H & Like complete all as specified and as directed. |
| 4 | M&L for cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in foundationcomplete all as specified and as directed. |
| 5 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded Stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and as directed. |
| 6 | Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and as directed. |
| 7 | Removing of excavated soil to a distance not exc 50mtrs and depositing where directed at a level not exc 1.50 mtrs above the starting point complete all as specified and as directed. |
| 8 | M & L for Rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10 mm thick on stone masonary work/ concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 9 | Supply only WPC complete all as specified and as directed. |
| 10 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and as directed. |
| 11 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and as directed. |
| 12 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 13 | M&L for applying two or more Coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior pimer applied @ 0.90 litre/ 10 Sqm over new surfaces of wall including necessary Scpffolding required for painting work, safety measures etc. complete all as specified and as directed. |
| 14 | Surface dressing not exc 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed. |
| 15 | M & L for hardcore (Broken boulder) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 16 | M & L 75 mm thick PCC (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base surfice finished even and rough to receive floor topping complete all as specified and as directed. |
| 17 | S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm /20 cm x20cm x 25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry with and cement concrete filleting work at edges with sand cushioning including 15mm thick screen bed of CM(1:6) in floors complete all as specified and as directed. |
| 18 | M&L Non structural Steel Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290.Gde-E-165 and fixing with raw bolts complete all as specified and as directed. |
| 19 | S&F for polycarbonate fibreglass reinforced plastic (FRP) translucent corrugated/Plain sheeting 6.00 mm thick fixed with coach screw and washer in roof, wall etc. weather resistant, made from fine anti UV film and resins complete all as specified and as directed. |
| 20 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and as directed. |
| 21 | M & L for Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (a) 40 mm thick with 20 mm nominal size stone aggregate. complete all as specified and as directed. |
| 22 | M & L for Vitrified tiles in floor in Size of Tile 600 x 600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. complete all as specified and as directed. |
| 23 | M & L for Vitrified tiles in 600x 600mm size of tile (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and as directed. |
| 24 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below complete all as specified and as directed. |
| 25 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area beyond 3 sq. metres. complete all as specified and as directed. |
| 26 | S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame complete all as specified and as directed. |
| 27 | M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in door frame filling and similar work filling complete all as specified and as directed. |
| 28 | Supply and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, complete all as specified and as directed. Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick plain grade -1, medium density flat pressed three layer article board FPT - I or graded wood particle board FPT- I, IS : 3087 marked, bonded with BWP type synthetic resin adhesive as per IS : 848 : |
| 29 | Supply and fixing aluminium tower bolts, size 250x10mm & 150x100mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and as directed. |
| 30 | Supply and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : Size : 300x16mm complete all as specified and as directed. |
| 31 | Supply and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed. (a) 125mm & 150mm |
| 32 | Supply and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete all as specified and as directed. |
| 33 | Supply and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and as directed. |
| 34 | M & L for Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). complete all as specified and as directed. |
| 35 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and as directed. |
| 36 | Two coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.complete all as specified and as directed. |
| 37 | M & L for fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter- locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm with 15mm thick integral densified micro edge light. complete all as specified and as directed. |
| 38 | Supply and fixing 25 mm dia brass curtain rods of wall thickness 1.25 mm with two brass brackets,holder fixed with brass screws and wooden plugs etc. wherever necessary complete all as specified and as directed. |
| 39 | E/M PORTION M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC conduit fixed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed modular flush boxes including Modular box , modular cover plates with frame mounting for housing the switches, socket outlets etc, complete all as specified and as directed.(a) One light/ Fan point controlled by one, one way switch 6 Amps 240 Volts. |
| 40 | (b) one 3 pin 6 Amp Socket outlet point on Same board including earth wire as per description given above and connected to common earth and earth terminals. |
| 41 | (c) one 3 pin 6 Amp Socket outlet point on Independent board including earth wire as per description given above and connected to common earth and earth terminals. |
| 42 | All as per item herein above but for 3-pin socket out let 15 Amps on independent board with 4 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous 4 Sqmm earth wire complete all as specified and as directed. |
| 43 | S&F socket 2-in-1 5 pin 6 Amps Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed. |
| 44 | S&F Switch piano Modular type 6 Amps single pole one way. complete all as specified and as directed. |
| 45 | S&F socket 5 in 1, 6 /16 Amp Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed. |
| 46 | S&F Switch piano Modular type 16 Amps single pole one way complete all as specified and as directed. |
| 47 | S&F ceiling rose surface type PVC 50 mm dia 3 terminals including PVC mounting block complete all as specified and as directed. |
| 48 | S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable from ceiling rose to tube light fitting complete all as specified and as directed. |
| 49 | S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230Volts with front openable cover single pole and neutral 8 way with suitable size bus bar consumer unit including connection to existing earthing complete all as specified and as directed. |
| 50 | S & Fix of MCB single pole, 240 volts, 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and as directed. |
| 51 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and as directed. |
| 52 | Supplying and laying of following size 40 mm bore DWC pipe ISI marked along with all accessories etc confirming to IS 14930, part II complete with fitting and cutting, jointing etc. in trench/open, for LT UG cable protection complete all as specified and as directed. |
| 53 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and as directed. |
| 54 | M & L for earthing complete with deep galvanised earth plate 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep bellow ground level with top edge of plate) not less than 1.5 m bellow normal ground level connected to galvanised earth led strip 25x 4 mm by means of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point all as specified or indicated including testing on completion. complete all as specified and as directed.Note -Rate are including of excavation,PCC Pit, PCC/CI cover, fune, watering pipe ,test point |
| 55 | Supply and laying tubes, Galvanised,\\"medium \\" grade, with all fittings and fixed to walls, ceiling or laying in floors, complete all as specified and as directed for following size:-(a) 80 mm bore pipe |
| 56 | (b) 50 mm bore pipe |
| 57 | (c) 25 mm bore pipe |
| 58 | Supply and fix cast iron sluice valve 80 mm bore with stainless steel spindle and cast iron hand wheel complying with IS : 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unserviceable valve complete all as specified and directed. |
| 59 | Supply and fixing of Gun metal gate valves with iron wheel head, screwed both ends for iron pipes complete, size of GM gate valve 50mm complete all as specified and as directed. |
| 60 | All as per item herein above but size of GM gate valve 25mm. complete all as specified and as directed. |
| 61 | All as per item herein above but size of GM gate valve 20mm. complete all as specified and as directed. |
| 62 | Supply and laying tubes, Galvanised,\\"medium \\" grade, with all fittings and fixed to walls, ceiling or laying in floors complete all as specified and as directed for 20 mm bore pipe |
| 63 | M & L for construction of valve chamber with brick work/ PCC block (1:4:8) Type D5, 20 CM thick masonry built in 1:6, 10 mm thick internal & 10 mm thick external plaster in 1:4 cm provided with 3 mm thick MS sheet cover and 40x 40x 3 mm MS angle iron frame fixed in copping PCC 1:2:4 type B-1 with locking arrangement and handle, painting of MS work with one coat of red oxide and two coats of synthetic enamel red paint complete including excavation and earthwork all as specified for 900x900x900 mm size. complete all as specified and as directed. |
| 64 | Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc complete all as specified and as directed. |
| 65 | Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, complete all as specified and as directed. |
| 66 | Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as specified and as directed. |
| 67 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified and as directed. |
| 68 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size. complete all as specified and as directed. |
| 69 | S&F PVC Conduit 25mm size run in walls/surface for provision for telephone cable/tv cable fixed in wall concealed and including dismantling of old pipes,cutting chasis,pinning in and making good to disturbed surface etc complete all as specified and as directed. |
| 70 | S&F telephone socket connector RJ-45 moduler type fix in wall conceled and including modular cover plate and moduler flush box for mounting of telephone socket etc complete all as specified and as directed.Note- Lan cable will not be provided by mes. |
| 71 | S&F cover plate with frame for telephone socket rj-45 modular type two module with pressed metal flush box made out of 2mm thick mm sheet complete all as specified and directed. |
| 72 | Supply & fix wall mounted fan 450 mm sweep , Air delivery 5220 CMH (cubic meters per hour) , speed 1300 rpm , single phase 240 volt, 50 Hz including mounting arrangement complete all as specifed and directed by Engg-in-charge |
| 73 | M& L Sub Main Wiring two run of size 1.5Sqmm PVC insulated electric power cable(heavy duty) 220 Volt Grade FRLSH with stranded copper conductor with 1.5Sqmm PVC insulated copper conductor earth wire in pvc conduit of suitable size (2 run of 1.5Sqmm cable and one of 1.5 Sqmm cable of PVC conduit will be measured as one unit) including dismantling of existing unserviceable submain wiring complete all as specified and as directed. |
| 74 | S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 75 | S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed. |
| 76 | S&F Socket, 6A - 2/3 pin combined 2 module,complete all as specified and as directed. |
| 77 | S&F Socket 6A/16A - 2/3 pin combined 2 module,complete all as specified and as directed. |
| 78 | S&F of metal flush box 3 module complete all as specified and as directed. |
| 79 | S&F of white cover plate with frame 3 module complete all as directed. |
| 80 | M&L for sheet metal enclosure MCB DBs SPN , 8 way 240 V, with 100 A rated copper bus bar , double door, IP 43 as per IEC 61439-3 , suitable for flush mounting and surface mounting including taking outcomplete all as specified and as directed. |
| 81 | M & L for MCB SP 6-32 Amps, 240 volts , 10 kA ISI marked as per IS/IEC 60898-1 2002 , C -curve , IP 20 including taking out complete all as specified and directed. |
| 82 | M & L for MCB SPN 32/40 Amps, 240 volts , 10 kA ISI marked as per IS/IEC 60898-1 2002 , C -curve , IP 20 including taking out complete all as specified and directed. |
| 83 | Supply and fix UPS for 30 min back up three phase AC input 300 to 450V and out put 415 V ± 1% of capacity 5 KVA ,complete all as specified and directed. Note- Maintenance of ups after installation carried out by user. |
| 84 | Supply and fix air cooled 5 star invertor split unit air conditioner electric driven single phase of capacity of 1.5 TR, compressor type High EER Twin rotary type-bldc, copper condensor coil including dust filter, air purifier, 3.5 meter lenth connecting pipe of copper and 3.5 meter connecting cable etc complete all as specified and as directed. |
| 85 | S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130V to 280V with output voltage stabilized at 230 V with accuracy of + 2.5% with digital display and capacity of 5 KVA complete all as specified and as directed. |
| 86 | S & Fix Metal plug and socket DB's with MCB 20A SP for AC complete all as specified and directed.. |
| 87 | S & F Submain wiring of size 2x4.0 sq. mm + 1x4.0 sq. mm earth wire of FRLSH (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed casing caping complete all as specified and as directed. |
| 88 | Labour and T&P for Cutting holes/ core cutting into or through cement concrete slabs, chajjas, etc. reinforced for making hole for split AC piping including making good the disturbed sufaces and packing complete all as specified and as directed. |
| 89 | S&F copper tubing along with necessary insulation as per manufacture standard for 1.5/2.0 TR split AC unit, copper tubing pipe (1/4'')or(3/8\\") and (1/2'')or(5/8\\") as per OEM preferred size with necessary fiitings jointing for split type AC including provision of insulation on tubing complete all as specified and as directed. Please Enable Macros to View BoQ information |
