|
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces area exc 400 sqm and depth n exe 50 mm complete all as specified and directed. |
| 2 | M &L for Preparing existing black top surfaces by brushing for removing caked mud etc, sweeping with brooms & finally fanning the cleaned surface with Air compressure / gunny bags to remove all loose dirt complete all as specified and directed. |
| 3 | M &L for applying evenly a priming/tack coat with bitumenous primer at @ 10 kg per 10 sqm using paving bitumen (VG-10) complete all as specified and directed. |
| 4 | M&L for 75 mm thick (compacted thickness) WBM in single layer with coarse aggregate ( granite, trap or basalt) of grading 3 (50 to 20mm size) spread rolled and consolidated to gradient and camber materials and camber as required with power roller complete all as specified and directed. |
| 5 | M&L for premix bituminous macadum with consolidated thickness (75 mm or less) with crushed and graded stone aggregate mixed together with VG=30 grade paving bitumen 4% by weight of total mix , to meet the desired requirement as mentioned in particular Specification mixing bituminous concrete in computerized hot mixing plant laying and spreading uniformly by mens of mechanical paver and rolled and compacted to required gredient and camber by 8 to 12 tonne vibratory road roller complete all as specified and directed Note:- (i) Bituminous macadam sjhall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper .(ii) The exact bitumen content required shall be determined as per IRC 27:2009 the adjustment in rate due to variation in quantity of bitumen if any shall be priced@ Rs 75.30 per Kg. |
| 6 | M & L for applying evenly a primer/tack coat with bituminous primer at 5kg per 10 Sqm using paving bitumen (VG-10) complete all as specified and directed |
| 7 | M&L for Bituminous premix semi dense bituminous concrete 30mm (compacted thickness) with 5.50 mm binder (paving bitumen VG-30 ) by weight of total mix, mixed in computrized hot mix plant, cold rolled and compacted to required gradient and camber with the help of mechanical paver and power roller 8 to 12 ton capacity complete all as specified and directed.Note:- (i) Semi dense asphaltic concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix shall be using hot mix plant and transporting the mix in tipper,(ii) The exact bitumen content required shall be determined following the Marshal Mix Design procedure contained in the Asphalt Manual MS-2 (Sixth edition) as reffered in case 3.5.3 of IRC 111 2009. The adjustment rate due to variation in quantity of bitumen if any shall be priced @ Rs 75.30 per Kg. |
| 8 | Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed. |
| 9 | Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level in any position complete all as specified and directed |
| 10 | Dismentalling of stone slabs/pavor block of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed, complete all as specified and directed. |
| 11 | M&L 75mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed. |
| 12 | Material and labour for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treated with aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50 mm thick uniformly levelled surface of stone dust cushioning, , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 13 | M&L for cement concrete (1:2:4) type B1 (using 12.5 mm graded stone aggregate) in Kerbs/Copings/benching etc for drain bed,edges of pavor block and similar works includins weathering slightly, rounded or chemfered angles and throating as directed including use of necessary formwork complete all as specified and directed. |
| 14 | M&L for Surface dressing not exceeding 15 cm deep in soft/ loose soil complete all as specified and as directed. |
| 15 | Moorum/red bajri filling in floors or pavings laid in layers n.exc 100 mm thick c spread rolled and consolidated to gradient and camber required complete all as specified and directed |
| 16 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as permanufactures instructions etc. complete all as specified and directed. |
| 17 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 18 | M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:4 including demolition of exisitng brick work complete all as specified and directed. |
| 19 | M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick / concrete/ stone surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 20 | S&F in repair rubber speed bump of size 500mm (Length) X 300MM (Width)x 50mm (height), ABS block and yellow & reflectors on both sides incluing neceessary fixing arrangement with epoxy/thermoplastic addhesive all as per manufactures instructions and complying the guidlines issued by latest MoRTH specification complete all as specified and directed. |
| 21 | S&F in repair road traffic convex mirror outdoor type made of one piece polycarbonate of size 1000 mm including steel tube of nominal bore 80mm and thicknes of 4.0mm as oer US 1161:2012 and 1.50 mtr length for mounting of mirror including painting on steel tube with synthetic enamal paint on red oxidee zinc chrome primer in approved shade incluidng embedding 300mm below GL including excavation and PCC M15 (Nominal Mix) with using 20mm graded stone aggregate in foundation of size 400 mm 400mm x 400mm and making good surface complete all as specified and directed. Please Enable Macros to View BoQ information |
