|
| 1 | Taking down chowkats or frames (without taking of shutter from the frame) not exc. 1.5 Sqm each complete all as specified and directed by engineer in charge. |
| 2 | Ditto- all as per item No. 1 above but exc. 1.5 Sqm but n. exc. 4 Sqm each complete all as specified and directed by engineer in charge. |
| 3 | Taking down shutter of any description n. exc. 1 Sqm each complete all as specified and directed by engineer in charge. |
| 4 | Ditto- all as per item No. 3 above, but exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed by engineer in charge. |
| 5 | Taking down shutter of any description exc. 2 Sqm but n.exc 4.00sqm each fixing shutter in same opening after replacing frame (frame/chowkats measured & paid as per items No-6) complete all as specified and directed by engineer in charge. |
| 6 | With or Without taking down shutter of any description n.exc. 1 Sqm and resecuring or easing,repairing & adjusting complete all as specified and directed by engineer in charge. |
| 7 | With or Without taking down shutter of any description exc. 1 Sqm and n.exc 4 Sqm each and resecuring or easing,repairing & adjusting complete all as specified and directed by engineer in charge. |
| 8 | M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supply & fixed complete all as specified and directed by engineer in charge. |
| 9 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of Virgin PVC polymer of K Value 58-60 (Suspension Grade), calcuim carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/lugs or SS dash fasteners shall be paid for seperately)Note :- For WPC solid door/frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 10 | Ditto- all as per item No.9 above, but of frames/Chowkhat of size 65 x 125 mm complete all as specified and directed by engineer in charge. |
| 11 | M&L in repairs for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxix additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 12 | All as per Item No 11 but for glazed and skeleton shutters to receive glass, s/s wire mesh gauze complete all as specified and directed by engineer in charge. |
| 13 | S&F for 2nd class hard wood 35mm glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (with out sash bars)including middle stiles overall(top to bottom) , edges of framing plain, chamfered or rounded,fitted with out and retired beads for securing glass etc size of membrane of shutter as specified in SSR part I, Section 8, clause 8.20 (a) and fitted to chowkats. complete all as specified and directed by engineer in charge. |
| 14 | S&F for factory made 35 mm thick plain framed, panelled shutter (two panned/single panel) with lock rail and middle style top to bottom and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The sizes of 2nd class hardwood rail and stiles as per IS 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed by engineer in charge. |
| 15 | S&F for 35 mm thick flush shutters, solid core commercial construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by engineer in charge. |
| 16 | S&F for Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per i complete all as specified and as directed by Engineer in charge. |
| 17 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with M.S. square tube and fittings etc complete all as specified and directed by engineer in charge. |
| 18 | S&F for 150 mm long aluminium, anodized barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified and directed by engineer in charge. |
| 19 | Ditto- all as per item No. 18 above but 100 mm long (ISI Marked) complete all as specified and directed by engineer in charge. |
| 20 | S&F in repairs for 150 mm long aluminium, anodized barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified and directed by engineer in charge. |
| 21 | Ditto- all as per item No. 20 above but 100 mm long (ISI Marked) complete all as specified and directed by engineer in charge. |
| 22 | S&F for 300 mm long aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed (ISI Marked). |
| 23 | S&F in repairs for 300 mm long aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed (ISI Marked). |
| 24 | S&F for 100mm size butt hinges stainless steel and fixed (ISI Marked). complete all as specified and directed by engineer in charge. |
| 25 | Ditto- all as per serial item No. 24 above but 75 mm size(ISI Marked) complete all as specified and directed by engineer in charge. |
| 26 | S&F in repairs for100mm size butt hinges stainless steel and fixed (ISI Marked) complete all as specified and directed by engineer in charge. |
| 27 | S&F in repairs for75mm size butt hinges stainless steel and fixed (ISI Marked) complete all as specified and directed by engineer in charge. |
| 28 | S&F for continuous (piano) hinges, mild steel, 30 mm width flaps (when open), bright finish or electro galvanized (ISI Marked) complete all as specified and directed by engineer in charge. |
| 29 | S&F for 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by engineer in charge. |
| 30 | S&F for 150 mm extruded aluminium alloy handles, fabricated type anodized (ISI Marked) complete all as specified and directed by engineer in charge. |
| 31 | S&F for 100mm extruded aluminium alloy handles,fabricated type anodized in repair (ISI Marked). |
| 32 | S&F in repairs for 150 mm extruded aluminium alloy handles, fabricated type anodized (ISI Marked). |
| 33 | S&F in repairs for 125mm extruded aluminium alloy handles,fabricated type anodized in repair (ISI Marked). |
| 34 | S&F in repairs for 100 mm size hasp and staple, aluminium anodised type, stove enamelled black including bolt to hinges plate and fixed with screws complete all as specified and directed by engineer in charge. |
| 35 | S&F for floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring, fixed in floor (overall length of cover plate 150mm) complete all as specified and directed by engineer in charge. |
| 36 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples/wooden beads.complete all as specified and directed by engineer in charge. |
| 37 | Ditto- all as per serial item No. 36 above but in repair complete all as specified and directed by engineer in charge. |
| 38 | S & F for mild steel works for hold fasts onforming to Fe-290 Gde-E-165 complete all as specified and directed by engineer in charge. |
| 39 | M &L for providing cement concrete type B1 1:2:4 (using 20 mm graded aggregate) for hold fast complete all as specified and directed by engineer in charge. |
| 40 | M & L for treating backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each ditto complete all as specified and directed by engineer in charge. |
| 41 | M & L for treating hold fast, small artcle etc., area n exc 0.1 sq. m each complete all as specified and directed by engineer in charge. |
| 42 | Dismantling boarding, any description fixed in any position with nails.complete all as specified and directed by engineer in charge. |
| 43 | S&F for 25 mm thick flush shutters, solid core commercial construction with block board core and plywood face panels, commercial type one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by engineer in charge. |
| 44 | S&F for 18/19mm thick pre-laminated particle board, inerior grade, prelaminaed one side wih decorative choice laminaion & other side balancing white lamination lamination & other side balancing white lamination, including wooden beading suitable size fixed with screws to timber frame work complete all as specified and directed by engineer in charge. |
| 45 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer.complete all as specified and directed by engineer in charge. |
| 46 | S&F for in repaire double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of ild steel heavy duty and fixed complete all as specified and directed by engineer in charge. |
| 47 | S&F for Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates cluding joining cleat for fixing Powder Coating to (minimum thickness of powder coating 50 micron) etc. complete all as specified |
| 48 | S&F for anodised aluminium powder coated (minimum 50 micron thickness) door shutter partly glazed with 5.5mm thick tinted glass and partly panelled with 9mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and as directed:-(a) Vertical members of shutter Section-85.00 x 44.45 x 2.00 mm (Section No 19560)(b) Top Members of shutter Section - 83.50 x 44.45 x 2.00mm (Section No 19581)(c) Lock rail (middle member) of shutter Section - 150.00 x 44.45 x 3.00 mm (Section No. 19596)(d) Bottom Members of shutter Section - 150.00 x 44.45 x 3.10mm (Section No. 19584)(e) Glazing clip for securing glass - 0.80 mm thick (Section No. 19370).Note:- Section No. given above are of make Jindal, Contractor may use similar section of other make mention in Appx A. Make:- Make of aluminium section : Jindal/ INDAL/ Hindalco as approved by GE. Please Enable Macros to View BoQ information |
| 49 | S&F for anodised aluminium powder coated (minimum 50 micron thickness) door shutter partly glazed with 5.5mm thick tinted glass and partly panelled with 9mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and as directed:-(a) Vertical members of shutter Section-85.00 x 44.45 x 2.00 mm (Section No 19560)(b) Top Members of shutter Section - 83.50 x 44.45 x 2.00mm (Section No 19581)(c) Lock rail (middle member) of shutter Section - 150.00 x 44.45 x 3.00 mm (Section No. 19596)(d) Bottom Members of shutter Section - 150.00 x 44.45 x 3.10mm (Section No. 19584)(e) Glazing clip for securing glass - 0.80 mm thick (Section No. 19370).Note:- Section No. given above are of make Jindal, Contractor may use similar section of other make mention in Appx A. Make:- Make of aluminium section : Jindal/ INDAL/ Hindalco as approved by GE. Please Enable Macros to View BoQ information |
