|
| 1 | Revised PHED BSR 2023 & PWD BSR |
| 2 | Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flatsor black pipe with hold fast and fitting complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide and two coat of enamel paints. |
| 3 | Supply and Fixing of Electric feeder panel (having projected canopy)for submersiblepump set Single phase upto 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter,Volt meter, connection plate, condensers of approved make and the panel enclosure should bemade out from 18 gauge M.S. Sheet with powder coating. Panel size Height 600 mm Width 500mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed withenclosure box having 4 legs, each leg s length 18 and double door including in built lockingsystem. The legs should be embedded in M-15 cement concrete platform. The size of CCplatform should be equal or bigger than the base size of panel having height of at least 200 mmfrom ground level. The operation of panel should be suitable for on 240 Volt AC Supply. |
| 4 | 2.39 Earth work in excavation over areas (exceeding 30cm depth, 1.5 mtr in width and 10 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter.2.39.2 Hard Rock (Requiring blasting )(FORM 30 TO 60 mtr) |
| 5 | 2.39 Earth work in excavation over areas (exceeding 30cm depth, 1.5 mtr in width and 10 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter.2.39.1 All kind of soil(UPTO 15 MTR.) |
| 6 | Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 oramended upto date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittingsand PVC rope confirming to IS 5175:1992 or amended upto date, along with clamping ofsubmersible cable etc. complete in all respect 40 mm dai |
| 7 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including makingconnection etc.2.19.2 3 core 6.0 Sq.mm |
| 8 | 2.39 Earth work in excavation over areas (exceeding 30cm depth, 1.5 mtr in width and 10 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter.2.39.2 Ordinary Rock(fORM 15MTR TO 29 mtr) |
| 9 | 2.40 Add extra over item No. 2.39.1 for every additional lift of 1.5 Mtr. or part thereof : In all kind of soils. |
| 10 | Supply & Installation of single phase ISI marked submersible motor pump set of threestar or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or asamended up to date of approved make of following duty condition with required accessoriesincluding making connection suitable for tube well/DCB. The job includes lowering of motor pump,installation of complete fitting & accessories, jointing of electrical cables up to switch board, testingof submersible pump set and interconnection up to water mains, complete in all respect.2.14.2 Above 2.0 KW |
| 11 | 2.43 Labour charges for horizontal boring 100 mm dia in open well in rocky strata with all types of rock cutting & drilling tools etc. including all T&P required for job including dewatering arrangement. |
| 12 | Providing and laying in position specified grade of cement concretee for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 13 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters, buttresses plinth and string course. |
| 14 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the billets to produce steel conforming to IS:1786) Cold twisted deformed bars (IS : 1786). Please Enable Macros to View BoQ information |
