|
| 1 | Supply, installation, testing and commissioning of submersible centrifugal pump-motor sets of capacity 600 LPM at 50 MWC as per Technical Specification Sheet-1. |
| 2 | Supply, installation, testing and commissioning of vertical inline centrifugal pump-motor sets of capacity 450 LPM at 35 MWC as per Technical Specification Sheet -2. |
| 3 | Supply, installation, testing and commissioning of MS surge tank along with assesories of capacity 100 litre for fire water application as per Technical Specification Sheet-3. |
| 4 | Supply, installation, testing and commissioning of Schedule-40, seamless, Hot-Dip Galvanised carbon steel piping of following sizes complete with fittings, gaskets, fasteners, and other necessary accessories, as per Technical Specification Sheet -4. |
| 5 | NB 50 mm |
| 6 | NB 80 mm |
| 7 | NB 100 mm |
| 8 | Installation, testing and commissioning of CI/DI piping of the size DN 100 mm complete with fittings, gaskets, fasteners, and other necessary accessories, as per Technical Specification Sheet -5. |
| 9 | Supply, installation, testing and commissioning of flanged end, Class-150, Cast Steel (CS) Gate Valves of following sizes, complete with counter flanges, gaskets, bolts, nuts, washers, and all necessary accessories, as per Technical Specification Sheet -6. |
| 10 | DN 80 mm |
| 11 | DN 100 mm |
| 12 | Supply, installation, testing and commissioning of flanged end, Class 150, Cast Steel (CS) Solenoid Valves of following size, complete with counter flanges, gaskets, nut-bolts, washers and all necessary accessories, as per Technical Specification Sheet-7. |
| 13 | NB 50 mm |
| 14 | NB 80 mm |
| 15 | Supply, installation, testing and commissioning of flanged end, Class-150, Cast Steel (CS) Duel Plate Non Return Valves of following sizes, complete with counter flanges, gaskets, bolts, nuts, washers, and all necessary accessories, as per Technical Specification Sheet - 8. |
| 16 | DN 80 mm |
| 17 | DN 100 mm |
| 18 | Supply, installation, testing and commissioning of threaded end, Class-2, Gun Metal (GM) Gate Valves of size NB 50 mm, complete with accessories as per Technical Specification Sheet - 9. |
| 19 | Supply, installation, testing and commissioning of Single outlet, Landing type, Gun Metal Fire Hydrant Valve of size NB 63 mm complete with 63 mm single female instantaneous outlet, and all necessary accessories, as per Technical Specification Sheet – 10. |
| 20 | Supply, installation, testing and commissioning of flanged end, PN 16, Air Release Valve of size NB 50 mm complete with isolation valve, counter flanges, gaskets, nut-bolts and all necessary accessories as per Technical Specification Sheet-11. |
| 21 | Supply, installation, testing and commissioning of Fire Hose Reel as per Technical Specification Sheet-12. |
| 22 | Supply and wrapping of bituminous-based anti-corrosive sheets (pipe coating) around external surface of pipes of various sizes, as per Technical Specification Sheet -13. |
| 23 | Supply, installation, testing and commissioning of Bourdon tube glycerin-filled pressure gauges of the ranges 0-10 bar, complete with syphoning tube, isolation valves and other accessories, all in stainless steel construction, as per Technical Specification Sheet-14. |
| 24 | Supply, installation, testing and commissioning of Pressure Switches complete with all necessary accessories as per Technical Specification Sheet-15. |
| 25 | Supply of material, fabrication, installation and painting of Mild Steel (MS) structures using angles, channels, plates, bars, pipes, joists and other sections, welded/bolted for trusses, steel frames, supports, and embedded parts, as per Technical Specification Sheet - 16. |
| 26 | Supply of materials and execution of scraping and painting work on pipes, structures, supports, and equipment of various sizes and shapes, including one coat of yellow oxide primer and two coats of synthetic enamel paint, as per Technical Specification Sheet-17. |
| 27 | Installation of NP-2 Hume pipes of the size NB 300 mm for road crossings, as per Technical Specification Sheet-18. |
| 28 | Supply of materials and construction of valve chambers of size 1.0 m x 1.0 m x 1.2 m using brick masonry, including plastering on both sides and fixing of a 6.0 mm thick aluminium chequered plate cover with 40 mm x 40 mm x 6.0 mm angle frame, as per Technical Specification Sheet-19. |
| 29 | Supply of materials and construction of plain cement concrete (PCC) 1:2:4 for pipe supports, pedestals, road reconditioning, and other related works, as per Technical Specification Sheet-20. |
| 30 | Excavation of earth in soft soil/murrum for pipeline laying and backfilling the trench after completion of work, as per Technical Specification Sheet-21. |
| 31 | Excavation of earth in hard rock, RCC, PCC, or asphalt roads for pipeline laying and backfilling the trench after completion of work, as per Technical Specification Sheet-22. |
| 32 | Disposal of surplus soil and debris by mechanical means within the complex, at locations as directed by the Engineer-in-Charge (EiC), as per Technical Specification Sheet-23. |
| 33 | Supply, installation, testing and commissioning of stainless steel kitchen exhaust hood of size 2600 mm x 800 mm with grease filter, drain and other accessories as per Technical Specification Sheet - 24. |
| 34 | Supply, installation, testing and commissioning of double-skin, modular, vertical / 2-tier type Air Washer Unit (AWU) of Air flow rate : 1500 CFM at 50 mm of WC static pressure, complete in all respects as per the Technical Specification Sheet – 25. |
| 35 | Supply, installation, testing and commissioning of Mild Steel, backward-curved, cabinet/inline type mixed air flow fan-motor set of Air flow rate : 2500 CMH at 25 mm of WC static pressure, complete in all respects as per the Technical Specification Sheet – 26. |
| 36 | Supply, installation, testing and commissioning of air ducts of 1.2 mm thick GI sheet as per Technical Specification Sheet - 27. |
| 37 | Supply, installation, testing and commissioning of manually operated, multi-louvered, opposed blade volume control dampers of various sizes in extruded aluminium construction, as per Technical Specification Sheet – 28. |
| 38 | Supply, installation, testing and commissioning of gravity-operated, multi-louvered backdraft dampers of various sizes in extruded aluminium construction, as per Technical Specification Sheet – 29. |
| 39 | Fabrication work for installation of MS air vessel as per Technical Specification Sheet - 30. |
| 40 | Supply, installation, testing and commissioning of flow switch complete with all accessories to ON/OFF supply of water as per requirement as per Technical Specification Sheet - 31. |
| 41 | Supply, installation, testing and commissioning of 4-way breaching inlet with CI butterfly valve as per Technical Specification Sheet - 32. |
| 42 | Supply, installation, testing and commissioning of hose box with nozzel and hose as per Technical Specification Sheet - 33 |
| 43 | Supply, installation, testing and commissioning of Fire Water MCC Panel as per TSS-E-1 |
| 44 | Supply, installation, testing and commissioning of Push button stations as per TSS-E-2 |
| 45 | Supply, installation, testing and commissioning of 3C 6sqmm copper conductor armoured cable as per TSS-E-3 |
| 46 | Supply, installation, testing and commissioning of 4C 25sqmm alumnium conductor armoured cable as per TSS-E-4 |
| 47 | Supply, installation, testing and commissioning of 3C 2.5sqmm copper conductor armoured cable as per TSS -E-5 |
| 48 | Supply, installation, testing and commissioning of 10C 2.5sqmm copper conductor armoured control cable as per TSS -E-6 |
| 49 | Supply, installation, testing and commissioning of SPN DB as per TSS -E-7 |
| 50 | Supply, installation, testing and commissioning of Emergency stop button with enclosure as per TSS -E-8 |
| 51 | Supply, installation, testing and commissioning of 8 SWG Bare copper wire as per TSS -E-9 |
| 52 | Supply, installation, testing and commissioning of End Termination of 3C 2.5sqmm cu Cable as per TSS -E-10 |
| 53 | Supply, installation, testing and commissioning of End Termination of 3C 6sqmm cu Cable as per TSS -E-11 |
| 54 | Supply, installation, testing and commissioning of End Termination of 10C 2.5sqmm cu Cable as per TSS -E-12 |
| 55 | Supply, installation, testing and commissioning of End Termination of 4C 25sqmm Al Cable as per TSS -E-13 |
| 56 | Supply, installation, testing and commissioning of Junction box with terminals as per TSS -E-14 |
| 57 | Supply, installation, testing and commissioning of HDPE pipe as per TSS -E-15 |
| 58 | Supply, installation, testing and commissioning of 150x50 mm Cable Tray as per TSS -E-16 |
| 59 | Supply, installation, testing and commissioning of 10 HP DOL statrter in existing Electrical Panel including panel modification work as per TSS -E-18 |
| 60 | Supply, installation, testing and commissioning of 10HP DOL Starters as per TSS-E-19 Please Enable Macros to View BoQ information |