|
| 1 | Dismantling tile work in floors and wall laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and laying glazed Vitrified tiles Matt/Antiskid finish of size in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Glazed Vitrified tiles Matt/Antiskid finish of Size of Tile 600 x 600 mm |
| 3 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x450 mm |
| 4 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,all as per manufacturer's specification and also including the cost of making openings for light fittings,all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (1 cement : 4 fine sand). |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 7 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including sand papering and preparing the surface. One coat Internally) |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade Two coat on old existing painted surfaces including scrapping, sand papering and preparing the surface smooth (Externally) |
| 9 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm |
| 10 | Providing and fixing senor type wall hanging urinal pot including all connecting accessories Make- Jaquar/Hindware or equivalent |
| 11 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 12 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15mm dia |
| 13 | Providing & fixing Single Lever Basin Mixer Tail Body . Model-KUP-35005-BPM (Jaquar) |
| 14 | Providing & fixing shawer head |
| 15 | Providing & fixing CP Angle Stop Cock. Model No-ARI-CHR-39053 |
| 16 | Providing & fixing of two way CP Angle Cock. |
| 17 | Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook withN.R.V (Back Flow Preventer) Jaquar- Model No-ALD-577 |
| 18 | Providing and fixing of PVC flushing cistern |
| 19 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Flexible pipe 32mm |
| 20 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 21 | Providing and fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality .600 mm long towel rail with total length of 645 mm, widt 78 mm |
| 22 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less that 300 gms. |
| 23 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (ISI Marked) |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work :15 mm nominal dia Pipes |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes .-ditto- but External work :40 mm nominal dia Pipes |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes .-ditto- but External work :50 mm nominal dia Pipes |
| 28 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm diameter (ISI Marked) |
| 29 | Wiring for light point / fan point / exhaust fan point/ call bell point with 1.5 Sqmm FR PVC inuslated copper conductor single core cable in surface / recessed PVC conduit with moudlar switch, modular plate, suitable GI/PVC Box and earthing the point with 1.5 Sqmm FR PVC insulated copper conductor single core cable etc as required |
| 30 | Wiring for light/power plug with 2 x 4 Sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alogwith 1 No 4 Sqmm FR PVC insulated copper conductor single core cable for loop earthing as require |
| 31 | Wiring for circuit/submain wiring with the size of 2 x 2.5sq mm alongwith earth wire of 1 x2.5 sq mm PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required |
| 32 | Wiring for circuit/submain wiring with the size of 2 x 6sq mm alongwith earth wire of 1 x6sq mm PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required |
| 33 | Supplying and fixing following size/ Module, GI box alongwith modular base & cover plate for modular switches in recess etc as required (a)1 or 2 Module (75mmX75mm) |
| 34 | (b)3 Module (100mmX75mm) |
| 35 | (c )6 Module (200mmX75mm) |
| 36 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.(a)1 or 2 Module (75mmX75mm) |
| 37 | (b)3 Module (100mmX75mm) |
| 38 | (c )6 Module (200mmX75mm) |
| 39 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections as required (a) 5/6 amps switch |
| 40 | (b) 3 pin 5/6 amp socket outlet |
| 41 | (c) 6 pin 15/16 Amps socket outlet |
| 42 | (d) 15/16 amps switch |
| 43 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 44 | Supply and fixing following way single pole and neutral sheet steel MCB distribution board,double door, 240 Volts on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, detachable gland plate, interconnections phosphatized and poweder painted including earthing etc as required , 6 Way |
| 45 | Supply and fixing following rating double pole 240 v isolator in the existing MCB DB complete with connections testing and commissioning etc as required, 63 Amps |
| 46 | Supplying and fixing 5 A to 32 A rating, Single pole, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 47 | Supply and fixing of LED down light 10 W (Make-Havells/Phillips) |
| 48 | Supply and fixing of LED tube light 18 W (Make-Havells/Phillips) |
| 49 | Supply and fixing of exhaust fan (Bajaj/Crompton greavs/Havells Please Enable Macros to View BoQ information |
