|
| 1 | Civil WorksClearing & grubbing the road land including uprooting the rank vegetations, grasses, bushes, the shrub jungle & tree up to 1.00 m girth including basic cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as directed by theEngineer-in-charge |
| 2 | Earth work excavation in foundation trenches in all kinds of soil incluidng moorum stoney earth and earthmixed with boulders except sheet rock and boulders requiring blasting, including dressing and levelling the bed up to the required depth and depositing the excavated materials with all leads and lifts, T&P. shoring and shuttering if required etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge |
| 3 | Supplying and filling foundation and plinth with sand well watered and rammed with basic cost, conveyance, royalities of all materials including labour cess but excluding GST complete |
| 4 | Filling foundation and plinth with excavated earth well wateted and rammed with basic cost, conveyance, royalities and of all materials complete including labour cess but excluding GST |
| 5 | Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite aggregates / chips / metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6\\" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 6 | RCC M20 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills Foundation |
| 7 | Plinth Beam |
| 8 | Lintel |
| 9 | Column & Beam |
| 10 | Supplying, cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe 5OOD} etc. including bending, binding, welding jointing if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. Tor steel and binding wires of 18· to 20 gauge as required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Tor steel only and no separate payment will be made towards the weight of binding wires) etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-Charge (First Floor) |
| 11 | Fly ash brick masonry in cement mortar (1:6) in Foundation and Plinth using (25x12 x8cm) size bricks after immersing the bricks for six hours in water before its use including, splays cutting, circular moulding and carbelling, champering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) |
| 12 | Fly ash brick masonry in cement mortar (1:6) in Superstructure using (25x12x8cm) size bricks after immersing the bricks for six hours in water before its use including, splays cutting, circular moulding and carbelling, champering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) as per specification & direction of the Engineer -in-Charge |
| 13 | Supplying, fitting and fixing M.S. door & window grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including basic cost of grills, conveyance, of all materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 14 | 12mm (½\\") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per specification & direction of the Engineer-in-charge |
| 15 | 16mm (5/8\\") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 16 | Finishing wall surfaces of wall with weather coat (Peach bloom) two coats over a coat of water bound cement primer to outer surface of walls including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge |
| 17 | Painting two coats with enamel paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge |
| 18 | Cleaning the debris from work site with initlal leads and lift by mechanical means within average lead of 5km loading into trucks/other mechanical means of transport and unloading from trucks on the road alignment incluidng basic cost, conveyance of all materials, labour, T&P. and machineries etc. including labour cess but excluding GST as per direction of the Engineer-in-charge |
| 19 | Excavation for roadway in all kinds of soil with hydraulic excavator 0.9 cum bucket capacity including cutting & loading in Tippers & disposal with a lift upto 1.5mtr. & lead upto 1000 mtr. trimming of bottom & side slopes in accordance with requirement of lines, grades & cross sections as per technical specifications including labour cess but excluding GST |
| 20 | Loosening, levelling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction construction & clause 305 of MoSRT&H specifications for Road & Bridge works (5th revision) including labour cess but excluding GST |
| 21 | Construction of embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means within a lead of 5km. spreading, grading to required slope and compacting to meet the requirement of table 300-2 & Clause 305 of MoRT&H Specifications for Road & Bridge works (5th Revision) including basic cost, conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-charge with ordinary compaction by PRR. |
| 22 | Providing granular sub-base by Coarse graded Granular sub-base Grading-VI materials as per table 400-1, spreadng in uniform layers with motor grader on prepared surface, mixing by mix in place method with vibratory roller to achieve the desired density complete as per Clause 401 of MoRT&H specifications for Road & Bridge works (5th Revision) including basic cost, conveyance, royalties and of all materials and cost of all labour, machineries and T&P. required for the work etc. including labour cess but excluding GST complete (Measurement to be taken on compacted section only) |
| 23 | Construction of Dry lean concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS 383 the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not exceed 15:1, aggregate gradation after blend including basic cost, conveyance all T&P and cost of all labour as required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge |
| 24 | Providing cement concrete pavement of M-30 as per approved drawing adopting hand guided semi mechanism method including cost of materials and as per approved Drawing, Design & Technical Specifications complete as per clause 602 of MOSRT&H Specifications for Road & Bridge works (Latest Revision) including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge |
| 25 | Providing compacted granular materials in shoulder by using moorum for road work satisfying the P.I. value with sand admixture if required as per approved drawing and technical specification as per Clause 407 of MoRT&H specification for Road & Bridge works (4th Revision) including basic cost, conveyance, royalties of all materials, cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-charge |
| 26 | Supplying fixing & spreading of precast interlocking zig zag concrete paver block of 80mm thick (approved make) and filling the interstics with sand on the prepared surface including basic cost, conveyance, royalities of all materials and cost of all labour and T&P. required for the work etc. including labour cess but excluding GST complete in all respect |
| 27 | Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984 as per the direction of the Engineer-incharge including labour cess but excluding GST complete |
| 28 | Cement concrete (1:2:4) using 12mm (½\\") size black hard crusher broken granite chips of approved quality and from approved quarry including hoisting, lowering, laying in layers not exceeding 15cm thick and compacting, watering & curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including basic cost, conveyance, royalities and of all materials and cost of all labour and T&P. required for the work etc. including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge Please Enable Macros to View BoQ information |
