|
| 1 | Felling trees |
| 2 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth |
| 3 | Window dismantaling |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter includingchowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Ofarea 3 sq. metres and below |
| 5 | Brick Demolition |
| 6 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead asper direction of Engineer-in-Charge.In cement mortar |
| 7 | Demolishing PCC/RCC |
| 8 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction ofEngineer -in-Charge. |
| 9 | Chipping of unsound/weak concrete |
| 10 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness |
| 11 | Earth work excavation |
| 12 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge.All kinds of soil |
| 13 | PCC Works 1:4:8 |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 15 | Radom Rubble masonry(RRM) |
| 16 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | Solid Block Masonry |
| 18 | Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 19 | Plastering |
| 20 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 21 | Centering and shuttering for pcc, plinth beam, lintel etc |
| 22 | Centering and shuttering including strutting, etc. and removal of form for:Lintels,beams, plinth beams, girders bressumers and cantilevers |
| 23 | Centering and shuttering for roof slab, shade etc |
| 24 | Centering and shuttering including strutting, etc. and removal of form for:Suspendedfloors, roofs, landings, balconies and access platform |
| 25 | RCC for plinth beam |
| 26 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 27 | RCC above plinth level |
| 28 | Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 29 | Steel Work |
| 30 | Steel reinforcement for R.C.C work including straightening,cutting,bending,placing in position and binding all complete after applying 2 coats of zinc rich primer.Supply of steel reinforcement will be in the scope of contractor.Thermo mechanically treated bars of grade Fe-500D or more of approved brand as per the instruction of engineer incharge |
| 31 | Providing Ceramic wall tiles of size 60cmx60cm or higher |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, as approved by Engineer-in-Charge, in masonry walls over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) with tile spacers of 3mm.Size of Tile 600x 600 mm or higher |
| 33 | Providing vitrified Floor tile of size 60 cm x 60 cm or higher |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), with tile spacers of 3mm. Size of Tile 600x 600 mm or higher |
| 35 | Grouting the tiled area with epoxy joint fillers |
| 36 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 37 | European water closet |
| 38 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with allfittings and fixtures complete, including cutting and making good the walls and floors wherever require : W.C. pan with ISI marked white solid plastic seat and lid |
| 39 | Indian water Closet |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mmSand Cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 41 | Health faucet |
| 42 | Supplying and fixing CP Health faucet good quality including cost of materials andlabour charges etc. complete as per the direction of site engineer-in-charge. |
| 43 | Wash basin with pillar tap |
| 44 | Providing and fixing wash basin with C.I. brackets/ rackbolts, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 45 | Long Body tap |
| 46 | Providing and fixing C.P. brass long body bib cock of approved quality conforming toIS standards and weighing not less than 690 gms.15 mm nominal bore |
| 47 | Shower rose with arm |
| 48 | Providing and fixing C.P. brass shower rose with arm of 15 or 20 mm inlet:100 mm diameter |
| 49 | Floor trap |
| 50 | Providing and fixing PVC moulded Floor trap for sanitary pipelines, including jointingPVC pipes with PVC solvent cement and filling gaps with cement grout- Floor trap 4way/3 way |
| 51 | Stainless steel soap dish |
| 52 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 53 | Frame work for door |
| 54 | \\"Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm\\" |
| 55 | PVC door shutter |
| 56 | Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). |
| 57 | Angle cock |
| 58 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 59 | Stop cock |
| 60 | Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore |
| 61 | Pipe 20 or 25mm concealed |
| 62 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work,including cutting chased and making good the wall etc. 20 or 25 mm pipe 12 Kgf/cm2 |
| 63 | Pipe 40 mm concealed |
| 64 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 |
| 65 | Pipe 50 mm concealed |
| 66 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 67 | Pipe 110 mm concealed |
| 68 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 69 | Pipe 20 or 25mm External work-exposed on wall |
| 70 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 or 25mm dia 12 Kgf/cm2 - External work - Exposed on wall |
| 71 | Pipe 32 mm External work-exposed on wall |
| 72 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mmdia 10 Kgf/cm2 - External work- Exposed on wall |
| 73 | Pipe 40 mm External work exposed on wall |
| 74 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mmdia 6 Kgf/cm2 - External work - Exposed on wall |
| 75 | Pipe 50mm External work exposed on wall |
| 76 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 6Kgf/cm2 - External work - Exposed on wall |
| 77 | Pipe 63 mm External work exposed on wall |
| 78 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 mspacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 -External work - Exposed on wall |
| 79 | Pipe 110 mm External work exposed on wall |
| 80 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 -External work- Exposed on wall |
| 81 | Pipe 32 mm Trenching |
| 82 | Providing and fixing PVC pipes includings joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia 6 Kgf/cm2 |
| 83 | Pipe 63mm Trenching |
| 84 | Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 |
| 85 | Pipe 110 mm Trenching |
| 86 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 87 | 63 mm dia Elbow |
| 88 | Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow |
| 89 | 63 mm dia 45 degree Elbow |
| 90 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow |
| 91 | 63 mm dia bend |
| 92 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend |
| 93 | 63*63*63 mm dia tee |
| 94 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee |
| 95 | 63 mm dia vent cowl |
| 96 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl |
| 97 | 63*50 mm dia reducer |
| 98 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer |
| 99 | 110 mm dia Elbow |
| 100 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow |
| 101 | 110 mm 45 degree dia Elbow |
| 102 | Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow |
| 103 | 110 mm dia bend |
| 104 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend |
| 105 | 110*110*110 mm dia tee |
| 106 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee |
| 107 | 110*110*110 mm dia door tee |
| 108 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee |
| 109 | 110*63 mm dia reducer |
| 110 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement -110x63 mm dia Reducer |
| 111 | Aluminium frame work |
| 112 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 113 | Aluminium Shutters |
| 114 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 115 | Hylam Sheet |
| 116 | Providing and fixing 4 mm thick hylam sheet in panelling fixed in aluminum doors,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. |
| 117 | Butt Hinges |
| 118 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm |
| 119 | Handles |
| 120 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm |
| 121 | Brass Lock |
| 122 | Providing and fixing Brass100 mm mortice lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. complete |
| 123 | LED Batton |
| 124 | Installation of LED batton 20W(Approximate), 230V, 50Hz AC Supply. LED batton shall be supplied by KMML |
| 125 | Exhaust fan |
| 126 | Installation of exhaust fan 225/3000mm (appx), 230V, 50Hz A6C supply. Exhaust fan shall be supplied by KMML. |
| 127 | Supply of 6A switch |
| 128 | Supply of 6A switch for 1 module, modular(Make : Legrand, Havells, Anchor, ABB, Honeywell) |
| 129 | Concealed box 1 |
| 130 | Supply and installation of concealed box, plate and frame for 6 module, modular, Make : Legrand, Havells, Anchor, Anchor, ABB, Honeywell |
| 131 | Concealed box 2 |
| 132 | Supply and installation of concealed box, plate and frame for 9 module, modular, Make : Legrand, Havells, Anchor, Anchor, ABB, Honeywell |
| 133 | Modular type wiring 1 |
| 134 | \\"Supply of materials required for copper point wiring and conduit wiring for lights, fans in PVC medium gauge conduit with; modular type switch-using 1.5 sq.mm PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm PVC insulated copper wire as required to complete. (Excluding supply of Fans, Exhaust fans, Lights, Concealed mounting boxes, Plates and Frames, Switches, Sockets and Fan regulators) (Approximate 5 meters/point)\\" |
| 135 | Modular type wiring 2 |
| 136 | Supply of required point wiring as above for more than 5 meters. |
| 137 | Modular type wiring 3 |
| 138 | Supply of materials required for copper circuit wiring in PVC conduit-with 1.5 sq.mm PVC insulated copper conductor stranded cable in recessed PVC conduit along with 1 no. 1.5 sq.mm. PVC insulated copper wire for loop earthing asrequired. |
| 139 | CP gratings |
| 140 | Providing and fixing CP grating of approved quality.;Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 141 | Towel rod |
| 142 | Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-incharge. |
| 143 | Ball valve 25mm |
| 144 | Providing and fixing PVC ball valve (ISI marked) of approved brand for Rigid PVC pipes, including jointing with PVC solvent cement: ;25mm nominal bore. |
| 145 | Ball valve 40mm |
| 146 | Providing and fixing PVC ball valve (ISI marked) of approved brand for Rigid PVC pipes, including jointing with PVC solvent cement:;40 mm nominal bore. |
| 147 | Hitched Glass for Aluminium Door |
| 148 | Providing and fixing hitched glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item): With float toughened glass panes of 4.00 mm thickness as per the directions of engineers in charge |
| 149 | Skilled labour |
| 150 | supply of skilled labour for Miscellaneous work |
| 151 | Walll Primer |
| 152 | Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre |
| 153 | Shutter for ventilator |
| 154 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 155 | Aluminium fixed frame work for toilet ventilation |
| 156 | \\"Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)\\" |
| 157 | Providing and fixing glazing in ventilator shutters |
| 158 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and directions of engineer in charge (cost of the aluminium snap beading shall be paid in basic item); with float toughened glass panes of 5mm thickness |
| 159 | Providing mirror of size 453x357 mm approx |
| 160 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm |
| 161 | Providing and erecting septic tank |
| 162 | Supplying and erecting in place, ready made RCC Septic tank (1.20 m dia x 2.4 m length size) including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC /Sand/ 06mm aggregate for the preparation of bed shall be paid separately) 50 flush capacity Please Enable Macros to View BoQ information |
