Tender For Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 10, Banda-Uttar Pradesh
TDR : 55463446
Tender Notice
BOQ
14 Days Left
Banda
Uttar Pradesh
Tender For Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 10
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5+3km cartage
2
Granular Sub-base with Well Graded Material Providing, laying and spreading Material(mix in place) on a prepared sub grade with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base.400.1
3
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 with 22.4 - 53 mm stone ballast as per Technical Specification Clause 405)
4
Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (30 mpa) including 25mm thick compacted bed of fine sand compacting and proper embedding/ laying of interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc. required for proper completion of work as directed by engineer-in charge.as per NEW ITEM NO.1
5
Supply & Fixing of Informatory M.S. Sign. Board Size 1200x900mm made of 18 gauge M.S. Sheet fixed in ISA 40x40x5 mm. frame by flat iron 40x5mm. on all four sides along with two vertical post of 2150mm. long from bottom to frame of angle iron 40x40x5 mm. with 150mm. horizontal hold fast at bottom braced with 40x5mm. flat iron 1980mm. long electrically welded and painted with one coat of redoxide primer.Rates Sanction SE/RED RS. 4200.00 including Letter writting. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.