|
| 1 | Cleaning of thick jungle & throney bushes without uprooting. |
| 2 | Dry earth work in foundation of masonary work on channel of discharge below 10 cumecs including lead lead up to 30 M lift up to 1.50 M and its disposal and back filling. |
| 3 | Earth work in strenghtening bank by manually or by other means whereever is possible and applicable including all lead and lift with manual compaction and dressing to profile. |
| 4 | Earth work by power transport for a lead of up to 1 km. including excavation, Loading, Unloading, manual compaction and dressing including all lifts, rates shall be applicable for lead beyond 630m and up to 1 km. |
| 5 | E/W in cutting/filling in remodling of distributary by hydrolic excavator having capacity 25 Cum/Hr including all lead, lift, proper disposal, rough dressing & mannual compaction all complete the work as per direction of Engineer-in-charge |
| 6 | Daula dressing of Dys. in required shape & size etc. all complete the work as per direction of Engineer-in- charge. |
| 7 | Dismanteling reinforced cement concrete including stacking of dismantaled materials as directed by Engineer-In-Charge within a distance of 60m. |
| 8 | Dismanteling brick work or stone work in lime or cement mortar including stacking of materials as directed by Engineer-In-Charge within a distance of 60m. |
| 9 | P/L Cement concrete (1: 2 :4) M-15 with 4.75mm to 20 mm well graded stone aggregate well mixed and laid in position complete including cost of all material lead & lift, curing and labour & T&P for proper complition of work as per direction of Engineer-in-charge |
| 10 | Centering and Shuttering for RCC work including rent of shuttering material labour and T & P required for proper completion of work for slab and wall |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 12 | P/L C.C 1:3:6 in Foundation with cement coarse sand and stone aggrigate 25 mm to 40 mm nominal size i/c all material labour T&P etc. Required for proper complition of work as per direction of Engineer-in-charge |
| 13 | Laying C.C. 1:1:2 with 4.75 to 10 mm stone grit excluding cost of steel but including cost of all labour T&P etc. |
| 14 | Class-150 brick work in 1:4 With cement coarse sand mortar including cost of all material labour T&P etc. |
| 15 | Cement pointing on 1:3 Cement and fine sand mortor including supply of material, labour and T&P. etc. all complete the work. As per direction of Engineer-in-charge. |
| 16 | Preparation and dressing the sub grade including removal of irregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and highly weathered rock for proper complition of work. |
| 17 | P/L LDPE film of 200 micron I/C cost of all labour and material and T&P required for proper completion of work |
| 18 | Providing and laying 75mm thick Cement concrete lining in M-15 with 4.75mm to 20 mm well graded stone aggregate well mixed and laid in position complete including cost of all materail lead & lift, curing and lobour & T&P for proper complition of work as per direction of Engineer-in-charge |
| 19 | TMT Steel or Iron in plain work such as reinforced Concrete or Reinforced Brick work (When not included in an over all rates) wrought to required shape as necessary including bending for proper compl. Of the work and including supply of all steel and wastages and overlapping and hooks. |
| 20 | One priming coat & one coat of dry distemper on new work including supply of all materials labour and T&P etc. required for proper completion of work. |
| 21 | Painting two coat of synthetic enamel paint on old surface with superior quality approved make including cost of all material labour T&P etc. required for proper completion of work. |
| 22 | Supplying & fixing 8 mm thick iron plate (4.5\\" x 4.5\\") size in inch with cutting & making required groove for proper fitting of bearing to complete the Job. |
| 23 | Supplying & fixing bearing (no.- 16 or 21) to complete the job |
| 24 | Supplying & fixing of 40 mm size dia Spindal rod with making required Square thread on lathe machine to complete the job. |
| 25 | Supplying & fixing chuk nut (4” x 3\\") to complete the job. |
| 26 | Supplying & fixing handle 40 mm dia G.I. pipe for operate the gate to complete the job. |
| 27 | Suppling & fixing grease for overhauling to complete the job |
| 28 | Arrangement of Generator Set, welding machine, gas cutter & other required T&P with mechanic, Welder, labour for cutting of various parts of gate & refitting of gate parts, including loading & unloading to complete the job. |
| 29 | Providing & Laying Spout pipe (PVC pipe 110mm dia 6kg. Pressure ISI make) Please Enable Macros to View BoQ information |
