|
| 1 | Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNDSS 23 & 24, V, VI (S2), VII, 9,10 |
| 2 | Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification. |
| 3 | Refilling with excavated excess earth work including all labour charges etc., complete complying with standard specification. |
| 4 | Plain Cement Concrete of mix 1 : 4 : 8 (One pat of Cement four part of sand eightpart of aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 5 | Reinforced Cement Concrete 1 : 1.5: 3 (One part of Cement one point five part of sand three part of aggregates) using 20mm gauge hard Granite broken stone including cost of curing, etc., complete as per standard specification and as directed by Engineer incharge. |
| 6 | Below G.L. |
| 7 | Above G.L. |
| 8 | Brickwork in cement mortor 1 : 5 (One part of Cement and five part of Sand) using best quality of cII class bricks of size 83/4x41/4x23/4 including all cost of materials and Labour Charges including Curing charges etc., Complete as per standard specification. |
| 9 | Below G.L. |
| 10 | Above G.L. |
| 11 | Supplying and errecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10 stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86 |
| 12 | Below G.L. |
| 13 | Pump Room below G.L. |
| 14 | Above G.L. |
| 15 | Pump room |
| 16 | Slab Bottom |
| 17 | Column |
| 18 | Column |
| 19 | Supplying fabricating and placing in position of steel rods using TMT Steel rod including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications. TNDSS NO: 86 |
| 20 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 21 | Plain Cement Concrete 1:2:4 mix (One Cement Two sand and Four aggregate) using 20mm ISS metal including cost and conveyance of all materials and all labor charges etc.,Complete., |
| 22 | Galvanised iron corrugated sheets (including 15 cm. Lapping) 0.8mm thick 80 Nos.of 20mmX6mm G.Ibolts and nuts and limpet washers; 20 Nos. of hook bolts and nuts (of size required)and washers or screws, if wooden batterns |
| 23 | Plastering in Cement Mortor 1:5 Mix (one part of Cement,, five part of sand)12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS NO: 56, 57 |
| 24 | Special Plastering in Cement Mortor 1:3 Mix (one part of Cement,,three part of sand)10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS NO: 56, 57 |
| 25 | Supplying and Painting the walls with Two Coats Weather sealed Exterior emulsion Paint as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.) |
| 26 | Supply and Delivery Fabrication of MS doors 0.90 x 2.00 m with outer frameand shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18gauge includingventilatingarrangements using 20mm square MSrods with locking arrangements including two coats of approved enamelpaint over coat of red oxide includingcost of angles, plates, sheets,fabrication charges, cost of hold fastand transportation charges etc.,complete. |
| 27 | Supply and Delivery Fabrication of MS windows 0.9 x 1.20 m with outer frameand shutter frame in MS angle of size40mm x 40mm x 6 mm with MS flat25mm x 25mm x 6mm and MS sheet of18gaugeincludingventilatingarrangements using 20mm square MSrods with locking arrangements including two coats of approved enamelpaint over coat of red oxide includingcost of angles, plates, sheets,fabrication charges, cost of hold fastand transportation charges etc.,complete. |
| 28 | Providing Granolithic Floor Finish 25mm thick with PCC 1:2:4 (one cement, two sand and Four Jelly) using 10mm to 12 mm HBGS jelly etc., |
| 29 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 30 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in cuitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in flush with wall with 3mm thick Hylum Sheet cover with TW Switch box and 5A F.T. Switch and making good of the Concealed portion with suitable colour for PVC CONCEALED LIGHT POINT/FAN POINT (for Electronics Regulator) (SD NO: 25) |
| 31 | Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in Flush with wall 150mm x 100mm x 113mm TW Switch box with 3mm thick Hylum sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14SWG TC wire and making good of the Concealed portion with suitable colour for CONCEALED PVC PLUG POINT (SD NO: 38) |
| 32 | Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains [ SD 69 ] |
| 33 | Supply and fixing of 16Amps DP switch with metal glad of 500V with fuse and nuetral ( side handle) on suitable TW box PWD earthing (SD. NO 141) |
| 34 | Supply and Fixing of TNEB meter Board suitable for 32A Single Phase Service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper Flat) on TW Plank of Size 375mm x 300mm x 19mm with Supporting TW Reepers of 1\\" thick an either side with Painting with Suitable bolt and nuts for fixing the TW Plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB Meter to Fuse Unit (SD No :125) |
| 35 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD No :65) |
| 36 | Supply and Fixing of 18W LED Tube Light for T8 Fitting (Single Side) etc complete as per standard specification. As per Electrical SOR Electrical items Sl.No :15 g |
| 37 | Supply and Fixing of 30 W LED Street Light Fittings etc complete as per standard specification. As per Electrical SOR Electrical items Sl.No : 17 a Please Enable Macros to View BoQ information |
