Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | R.C.C. Jack Well (6.00m X 10.0m)Item No.1Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with B. C. soil (in gunny bags if requried). Providing impervious / semipervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.Lift 0.00 M to 1.50 m |
| 2 | Item No.2Excavation in general in soft material comprising of soft soil, soft murrum, sand, hard murum with boulders in wet or dry condition for Head Works I.e. intake well, connecting pipe Jack well, pump House, supply well etc. for lift'0 to 1.5 M & lead 'of 1.50M including barricading, guarding, depositing oft surplus excavated stuff within a radius of 0.5km as directed by Engineer-in-charge-,etc 'complete excluding refilling.Lift 0.00 M to 1.50 m |
| 3 | Lift 1.50 M to 3.00 m |
| 4 | Lift 3.00 M to 4.50 m |
| 5 | Item No.3Excavation in general in hard material comprising of soft rocks, hard rock, manjara rock etc. by blasting / controlled blasting ,chiseling as re-quirked in wet or dry condition for head works I. e. 'intake well connecting pipe, jack well ,pump 'house supply well, etc. for lift 0 to1.5M and lead of 1.50M including barricading, guarding depositing off surplus excavated stuff within a radius 'of 0.5 km as directed by Engineer -in-charge excluding refilling.Lift 4.50 M to 6.00 m |
| 6 | Lift 6.00 M to 7.50 m |
| 7 | Lift 7.50 M to 9.00 m |
| 8 | Lift 9.00 M to 10.50 m |
| 9 | Item No.4Providing and laying in situ Cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete. |
| 10 | Item No.5Providing & costing in constructing in situ. C.C of trap granite/ quartzite / gneiss/ metal of approved quality of R.C.C. work as per detailed drawing & design or as directed by Engg. in charge including dewatering , ceterind from work,compacting, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( By weight batching & mix design for M-250 & M-300 only use of L&T, ACC Ambuja, Birla Gold, Manikgad, Rajashree etc. cement is permitted excluding M.S or Tor reinforcement in R.C.C. M-200grade.1) R.C.C. M-250 for Beam |
| 11 | 2) R.C.C. M-250 for vertical wall and Slab |
| 12 | Item No.6Providing & fixing in position steel bar reinforcement of various diameters for R.C.C. Pipes, caps, footing, foundation, slab, beams, columns, canopies, staircase, newels,chajjas, lintels,pardies,coping,fine arches etc. as per detailed designs, drawing & schedules including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). |
| 13 | Item No.7Providing & laying weep holes of 80 mm AC/PVC pipe as per drawing for abutment returns, return walls etc. complete. |
| 14 | Item No.8Dewatering charges for estimation purpose for head works in river basin or dam |
| 15 | Item No.9Reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete.( MJP DSR 21-22 P.No.45 I.No.15))+10% |
| 16 | Item No.10Prvoding and fixing in position C.I. dapuri steps or 22mm dia. M.S. bar step with proper anchorage,etc.and providing and applying 3 coats of anticorrosive paint, etc complete as directed by Engineer-in-charge.(MJP/DSR 23-24 Pg.no 292 It, no 11))+10% |
| 17 | Item No.11Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete.( PWD DSR 23-24, Pg No. 228, It.No.44.11) |
| 18 | Item no.11Water sample testing |
| 19 | Item no.12Carrying out recuperation/ yield test for asserting the discharge of constructed well/excavated profile as directed by Engineer-incharge. The test is carried out by drawing down water from the well/profile below normal/ subsoil water level upto full depth rise in water level is recorded. The normal water level/ subsoil water level in the well/ profile as well as stainer/ suction level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, overhead, labourers, etc. completed as directed.(MJP/DSR 23-24 Pg.no 294 It, no 17 ii))+10% |
| 20 | Item no.13Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.(MJP/DSR 23-24 Pg.no 281 It, no 5))+10% |
| 21 | Item no.14Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plates to the required square or rounding shape, making holes in the plate, including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.6 mm thick(MJP/DSR 23-24 Pg.no 291 It, no 6a))+10% |
| 22 | Item no.15Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.(MJP/DSR 23-24 Pg.no 56 It, no 1))+10% |
| 23 | Item no.16Providing structural steel work in rolled sections like joists, channels, angles, tees, etc. as per detailed designs and drawings including fixing in position without connecting plates, braces, etc. and one coat of anticorrosive paint and over it two coats of oil painting, of approved quality and shade, etc. complete.(MJP/DSR 23-24 Pg.no 46 It, no 5))+10% |
| 24 | Switch Room (2.50 x 2.50 x 3.00m)Item No. 1Excavation for foundation/pipe trenches in earth soilsExcavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259)MJP DSR 2023-24 P No 42; I No 1 |
| 25 | Item No. 2Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.MJP DSR 2023-24 P No 41; I No 18 |
| 26 | Item No. 3Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP DSR 2023-24, Pg No.41, It.No.17 ) |
| 27 | Item No. 4Providing and laying in situ cement concrete M- 10/1:3:6 of trap/granite….MJP DSR 2023-24, 1b Pg No. 47) |
| 28 | Item No. 5Providing and casting in situ Cement Concrete of metal of approved quality for RCC work as per detailed deawings and designs or as directed by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surface curing,etc. complete. Use of L & T,A.C.C. , Ambuja , Birla Gold , Manikgad, Rajashree, etc. cement is permitted.RCC M-200A) R.C.C. FootingMJP DSR 2023-24 2b P.No 47 |
| 29 | B)R.C.C. ColumnMJP DSR 2023-24 2b P.No 48 |
| 30 | C)R.C.C. BeamMJP DSR 2023-24 4b P.No 48 |
| 31 | D)ChajjaMJP DSR 2023-24 6b P.No 50 |
| 32 | E)R.C.C. SlabMJP DSR 2023-24 5b P.No 50 |
| 33 | Item No. 6Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteFor RCC M-200 grade forPwd Dsr 2023-24 I,No 27.05 Sr No, 892 |
| 34 | Item No. 7Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.Pwd Dsr 2023-24 BDT-11 I.No. 39.05 |
| 35 | Item No. 8Providing and fixing steel window of various sizes per detailed drawing with out hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality,iron oxidised fixture sand fastenings,finishing with oil painting two coats complete. PWD DSR 2023-24,BDT_53 I.No. 39.19 |
| 36 | Item No. 9Providing & Fixing in position steel bar reinforcement of various dia. For RCC….MJP DSR2021-22,BDT_53 I.No. 39.19 Pno 52 |
| 37 | Item No. 10Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.PWD DSR 2023-24,I.No. 32.06 BDL- 4 Sr No 960 |
| 38 | Item No. 11Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.PWD DSR 2023-24,P.No BDL- 7 Sr No 961 |
| 39 | Item No. 12Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.(PWD DSR 2023-24 Page No156 It.No 33.01 Sr No 986) |
| 40 | Item No. 13Providing and applying washable powder distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat) etc .complete.PWD DSR 2023-24,P.No.167 BDM-11 Sr No 1102 |
| 41 | Item No. 14Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.PWD DSR 2023-24,P.No.167 BDM-11 |
| 42 | Item No. 15Providing and applying one coat of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface.PWD DSR 2023-24,P.No.BDO -7 |
| 43 | Item No. 16Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SWElectrificatin of Switch room |
| 44 | Switch Room (2.50 x 2.50 x 3.00m)Item No. 1Excavation for foundation/pipe trenches in earth soilsExcavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259)MJP DSR 2023-24 P No 42; I No 1 |
| 45 | Item No. 2Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.MJP DSR 2023-24 P No 41; I No 18 |
| 46 | Item No. 3Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263)MJP DSR 2023-24, Pg No.41, It.No.17 ) |
| 47 | Item No. 4Providing and laying in situ cement concrete M- 10/1:3:6 of trap/granite….MJP DSR 2023-24, 1b Pg No. 47) |
| 48 | Item No. 5Providing and casting in situ Cement Concrete of metal of approved quality for RCC work as per detailed deawings and designs or as directed by Engineer-in-charge including normal dewatering, centering,form work, compaction, finishing the formed surface curing,etc. complete. Use of L & T,A.C.C. , Ambuja , Birla Gold , Manikgad, Rajashree, etc. cement is permitted.RCC M-200A) R.C.C. FootingMJP DSR 2023-24 2b P.No 47 |
| 49 | B)R.C.C. ColumnMJP DSR 2023-24 2b P.No 48 |
| 50 | C)R.C.C. BeamMJP DSR 2023-24 4b P.No 48 |
| 51 | D)ChajjaMJP DSR 2023-24 6b P.No 50 |
| 52 | E)R.C.C. SlabMJP DSR 2023-24 5b P.No 50 |
| 53 | Item No. 6Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteFor RCC M-200 grade forPwd Dsr 2023-24 I,No 27.05 Sr No, 892 |
| 54 | Item No. 7Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.Pwd Dsr 2023-24 BDT-11 I.No. 39.05 |
| 55 | Item No. 8Providing and fixing steel window of various sizes per detailed drawing with out hot dip zinc coating, without ventilators, including fabricating/glazing with plain/obscured glass panels of approved type and quality,iron oxidised fixture sand fastenings,finishing with oil painting two coats complete. PWD DSR 2023-24,BDT_53 I.No. 39.19 |
| 56 | Item No. 9Providing & Fixing in position steel bar reinforcement of various dia. For RCC….MJP DSR2021-22,BDT_53 I.No. 39.19 Pno 52 |
| 57 | Item No. 10Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.PWD DSR 2023-24,I.No. 32.06 BDL- 4 Sr No 960 |
| 58 | Item No. 11Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.PWD DSR 2023-24,P.No BDL- 7 Sr No 961 |
| 59 | Item No. 12Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.(PWD DSR 2023-24 Page No156 It.No 33.01 Sr No 986) |
| 60 | Item No. 13Providing and applying washable powder distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat) etc .complete.PWD DSR 2023-24,P.No.167 BDM-11 Sr No 1102 |
| 61 | Item No. 14Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.PWD DSR 2023-24,P.No.167 BDM-11 |
| 62 | Item No. 15Providing and applying one coat of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface.PWD DSR 2023-24,P.No.BDO -7 |
| 63 | Item No. 16Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SWElectrificatin of Switch room |
| 64 | PUMPING MACHINERY 7.50 BHP Item No. 1Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150mm Dia with polypropylene/Noryl Impeller ) up to 20 Stages7.50 BHP PUMPSETPM 1-2-7 (MJP Ele. & Mech. DSR 2023-24)Basic supply Rate for pump 40268 |
| 65 | Item No. 2Supplying, erecting, testing and commissioning of flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.3 core 6sqmmPWD ELE SSR P. No./I. No. 176/12-4-10Supply rate Rs.657 |
| 66 | Item No. 3Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.Upto 7.5 HP (MJP /DSR (Mech,) 2023-24 I.No.1 P.No.27 LG 1-1)Basic Rate Rs 2375 Erection Rate Rs 104 |
| 67 | Item No. 4Providing , installing & commissioning main control pannel board including V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for 7.50HP and 12.50BHP pump etc.complete. (Market rate) as RA Attached |
| 68 | Item No. 5Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main.Pressure gauge (100 mm dia)(MJP /DSR(Mech.)2023-24 P/I.10,PM 11-1) |
| 69 | Item No. 6Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36)(SSR 2021-22 Code No. CB6-4, P. No. 35 )Basic Rate Rs 187.00 |
| 70 | Item No. 7Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP(PWD ELE SSR P.No/I No. 140/9-1-4 )Basic Rate Rs 1537 |
| 71 | Item No. 8Providing supplying and fixing G.I. pipe of verious dia as suction & delevery pipe including loading, unloading , octri , fixtuture and fastening material etc. complete.65 mm G.I.Pipe |
| 72 | Rising Main 110,75 mm-HDPE-8 kg L -350 m Item No. 1Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form110 mm Dia HDPE Pipe 8 Kg/sqcmMJP SSR 2023-24 P No 123 ; I No 2-ix |
| 73 | Item No. 210% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 74 | Item No. 3Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 100 mm Dia.PN-1.6 (without bypass)(MJP SSR 2023-24 P No 146 ; INo 2c-iii,iv) |
| 75 | Item No. 4Providing & supplying ISI mark CI D/F reflux valve (Non- return valve) of following dia including all taxes (central and local ), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)Reflux valves 100 mm Dia-PN-1.6(MJP SSR 2023-24 P No 143 ; INo 1 a-2) |
| 76 | Item No. 5Providing and supplying Air valves as per IS-10845 and MJP’s standard specifications of approved mark and quality of following diameters including all taxes (Central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 25 mm Dia-PN-1(MJP SSR 2023-24 P No 149 ; INo 5 b) |
| 77 | Item No. 6Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 78 | Item No. 7Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete.MJP DSR 2023-24, P. No. 41, I. No. 16 |
| 79 | Item No. 8Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II110 mm Dia HDPE Pipe 8 Kg/sqcmMJP DSR 2023-24, P. No. 115, I. No. 2- ix |
| 80 | Item No. 9Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 100 mm Dia.PN-1.6 (without bypass)MJP DSR 2023-24, P. No. 135, I. No. 4-iv |
| 81 | Item No. 10Lowering, Laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 25 mm Dia-PN-1MJP SSR 2023-24 P No 152 ; INo 10 a 5 |
| 82 | Item No. 11Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.)upto 150 mm on Murum & harder strataMJP SSR 2023-24 P No 155 ; INo 17 a 1 |
| 83 | Item No. 12Providing and laying in situ following grades of C.C. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete.b) 1:2:4 (M-150) grade for encasingMJP SSR 2023-24, P.No. 47, I. No. 1-B |
| 84 | Item No. 13Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.MJP SSR 2023-24, P. No. 45, I. No. 16 |
| 85 | Item No. 14Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.110 mm Dia HDPE Pipe 8 Kg/sqcmMJP DSR 2023-24, P. No. 115, I. No. 3/vii, ix |
| 86 | 75000 Ltr MBR 12m Staging Ht.Item No. 1Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/c for E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. RCC ESR OF CAPACITY 75000 LiterRA RCC ESRadd 10% for Hilly area |
| 87 | Item No. 2Providing , supplying & lowering laying & jointing ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores unloading etc. complete as directed by Engineer-in-charge.,100mm dia CIDF pipesMJP SSR 2021-22 P.NO.72 ITEM NO.5 |
| 88 | Item No. 3Providing Errecting & Hydraulic Testing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.100mm dia CIDF Sluice ValveMJP SSR 2021-22 P.NO.132 +135 ITEM NO.2+4 |
| 89 | Item No. 4Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete.Dia. 80 mm to 300 mmMJP SSR 2021-22 P.NO.72 ITEM NO.6 |
| 90 | Rising Main 90 mm-HDPE-8 kg L -5700 mItem No. 1Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form90 mm Dia HDPE Pipe 8 Kg/sqcmMJP SSR 2023-24 P No 123 ; I No 2-viii |
| 91 | Item No. 210% of cost of pipes shall be considered for cost of PVC/HDPE specials for estimate purpose only. |
| 92 | Item No. 3Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 100 mm Dia.PN-1.6 (without bypass)(MJP SSR 2023-24 P No 146 ; INo 2c-iv) |
| 93 | Item No. 4Providing & supplying ISI mark CI D/F reflux valve (Non- return valve) of following dia including all taxes (central and local ), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)Reflux valves 100 mm Dia-PN-1.6(MJP SSR 2023-24 P No 143 ; INo 1 a-2) |
| 94 | Item No. 5Providing and supplying Air valves as per IS-10845 and MJP’s standard specifications of approved mark and quality of following diameters including all taxes (Central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 25 mm Dia-PN-1(MJP SSR 2023-24 P No 149 ; INo 5 b) |
| 95 | Item No. 6Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 96 | Item No. 7Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete.MJP DSR 2023-24, P. No. 41, I. No. 16 |
| 97 | Item No. 8Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II90 mm Dia HDPE Pipe 8 Kg/sqcmMJP DSR 2023-24, P. No. 115, I. No. 2-viii |
| 98 | Item No. 9Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 100 mm Dia.PN-1.6 (without bypass)MJP DSR 2023-24, P. No. 135, I. No. 4-iv |
| 99 | Item No. 10Lowering, Laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 25 mm Dia-PN-1MJP SSR 2023-24 P No 152 ; INo 10 a 5 |
| 100 | Item No. 11Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.)upto 150 mm on Murum & harder strataMJP SSR 2023-24 P No 155 ; INo 17 a 1 |
| 101 | Item No. 12Providing and laying in situ following grades of C.C. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete.b) 1:2:4 (M-150) grade for encasingMJP SSR 2023-24, P.No. 47, I. No. 1-B |
| 102 | Item No. 13Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. completeMJP SSR 2023-24, P. No. 45, I. No. 16 |
| 103 | Item No. 14Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.90 mm Dia HDPE Pipe 8 Kg/sqcmMJP DSR 2023-24, P. No. 115, I. No. 3/vii, ix |
| 104 | 50000Ltr GSRItem No. 1 Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypass arrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder insideand outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure.RCC GSR OF CAPACITY 40000 LiterRA RCC GSRadd 10% for Hilly area |
| 105 | Item No. 2Providing , supplying & lowering laying & jointing ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores unloading etc. complete as directed by Engineer-in-charge.100mm dia CIDF pipesMJP SSR 2021-22 P.NO.72 ITEM NO.5 |
| 106 | Item No. 3Providing Errecting & Hydraulic Testing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.100mm dia CIDF Sluice ValveMJP SSR 2021-22 P.NO.132 +135 ITEM NO.2+4 |
| 107 | Item No. 4Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete.Dia. 80 mm to 300 mmMJP SSR 2021-22 P.NO.72 ITEM NO.6 |
| 108 | Sump to Girls Hostel & Main BuildingPUMPING MACHINERY 3.00 BHP Item No. 1Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150mm Dia with polypropylene/ Noryl Impeller ) up to 20 Stages3.00 BHP PUMPSETBasic supply Rate for pump = 32263PM 1-2-7 (MJP Ele. & Mech. DSR 2023-24)Total Rate Rs. = |
| 109 | Item No. 2Supplying, erecting, testing and commissioning of flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.3 core 4sqmmPWD ELE SSR P. No./I. No. 175/12-4-9Supply rate Rs.657Add 0.00% for Errection |
| 110 | Item No. 3Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.Upto 7.5 HP (MJP /DSR (Mech,) 2023-24 I.No.1 P.No.27 LG 1-1)Basic Rate Rs 2375Erection Rate Rs 104 |
| 111 | Item No. 4Providing , installing & commissioning main control pannel board including V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for upto 7.50HP pump etc.complete. (Market rate) as RA Attached |
| 112 | Item No. 5Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main.Pressure gauge (100 mm dia)(MJP /DSR(Mech.)2023-24 P/I.10,PM 11-1) |
| 113 | Item No. 6Main wiring work from M. S. E. B. cut out to the panel board 4 core x 4 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36)(SSR 2021-22 Code No. CB6-4, P. No. 35 )Basic Rate Rs 187.00 |
| 114 | Item No. 7Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP(PWD ELE SSR P.No/I No. 140/9-1-4 )Basic Rate Rs 1537 |
| 115 | Item No. 8Providing supplying and fixing G.I. pipe of verious dia as suction & delevery pipe including loading, unloading , octri , fixtuture and fastening material etc. complete.50 mm G.I.Pipe |
| 116 | Sump to Boys Hostel PUMPING MACHINERY 3.00 BHP Item No. 1Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150mm Dia with polypropylene/ Noryl Impeller ) up to 20 Stages3.00 BHP PUMPSETBasic supply Rate for pump = 32263PM 1-2-7 (MJP Ele. & Mech. DSR 2023-24)Total Rate Rs. = |
| 117 | Item No. 2Supplying, erecting, testing and commissioning of flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.3 core 4sqmmPWD ELE SSR P. No./I. No. 175/12-4-9Supply rate Rs.657Add 0.00% for Errection |
| 118 | Item No. 3Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.Upto 7.5 HP (MJP /DSR (Mech,) 2023-24 I.No.1 P.No.27 LG 1-1)Basic Rate Rs 2375Erection Rate Rs 104 |
| 119 | Item No. 4Providing , installing & commissioning main control pannel board including V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for upto 7.50HP pump etc.complete. (Market rate) as RA Attached |
| 120 | Item No. 5Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main.Pressure gauge (100 mm dia)(MJP /DSR(Mech.)2023-24 P/I.10,PM 11-1) |
| 121 | Item No. 6Main wiring work from M. S. E. B. cut out to the panel board 4 core x 4 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36)(SSR 2021-22 Code No. CB6-4, P. No. 35 )Basic Rate Rs 187.00 |
| 122 | Item No. 7Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP(PWD ELE SSR P.No/I No. 140/9-1-4 )Basic Rate Rs 1537 |
| 123 | Item No. 8Providing supplying and fixing G.I. pipe of verious dia as suction & delevery pipe including loading, unloading , octri , fixtuture and fastening material etc. complete.50 mm G.I.Pipe |
| 124 | Rising Main 50mm (6.24 Kg/m) GI Heavy L -180 mItem No. 1Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.50mm (6.24 Kg/m) GI HeavyMJP SSR 2023-24 P No 93 ; I No 1c-vi |
| 125 | Item No. 210% of cost of pipes shall be considered for cost of GI specials for estimate purpose only. |
| 126 | Item No. 3Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. completeSluice valves 50 mm Dia.PN-1.6 (without bypass)(MJP SSR 2023-24 P No 146 ; INo 2c-iii,iv) |
| 127 | Item No. 4Providing & supplying ISI mark CI D/F reflux valve (Non- return valve) of following dia including all taxes (central and local ), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete. reflux valves as per I.S.5312 part I (1984)Reflux valves 50 mm Dia-PN-1.6(MJP SSR 2023-24 P No 143 ; INo 1 a-2) |
| 128 | Item No. 6Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 129 | Item No. 7Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete.MJP DSR 2023-24, P. No. 41, I. No. 16 |
| 130 | Item No. 8Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.50mm (6.24 Kg/m) GI Heavy MJP DSR 2023-24, P. No.115, I. No. 2c-vi |
| 131 | Item No. 9Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) MJP DSR 2023-24, P. No. 135, I. No. 4-ivSluice valves 50 mm Dia.PN-1.6 (without bypass) |
| 132 | Item No. 12Providing and laying in situ following grades of C.C. of trap/ granite/ quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete.b) 1:2:4 (M-150) grade for encasingMJP SSR 2023-24, P.No. 47, I. No. 1-B |
| 133 | Item No. 13Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. completeMJP SSR 2023-24, P. No. 45, I. No. 16 |
| 134 | Item No. 14Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.50mm (6.24 Kg/m) GI Heavy MJP DSR 2023-24, P. No. 115, I. No. 3/vii, ix |
| 135 | MSEB Charges Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
