Tender For Proposed Laying Of Ilp And Electrical Work At Common Collection Center At B Canal Road Near Mcc Sathangadu In Division-07, Unit-02, Zone-01.(Part-4), Thiruvallur-Tamil Nadu
TDR : 55460412
Tender Notice
BOQ
4 Days Left
Thiruvallur
Tamil Nadu
Tender For Proposed Laying Of Ilp And Electrical Work At Common Collection Center At B Canal Road Near Mcc Sathangadu In Division-07, Unit-02, Zone-01.(Part-4)
Name of Work:- PROPOSED LAYING OF ILP AND ELECTRICAL WORK AT COMMON COLLECTION CENTER AT B CANAL ROAD NEAR MCC SATHANGADU IN DIVISION-07, UNIT-02, ZONE-01.(PART-4)
Sl. No.
Item Description
1
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (This Rate Is Applicable Only If Work Is Done During Night)
2
Supplying And Fixing Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro-Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To-Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc.Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).
3
UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should befixed to the wall with 100% packing with screws and silicon packing all round
4
Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
5
32 ADP MCB ISOLATOR
6
I.SI MARKED 2X25SQ.MM CABLE
7
HDPE PIPE OF SIZE 50MM O.D X 38MM I.D
8
SUPPLY AND FIXING OF TNEB METER BOARD SUITABLE FOR CCB LOWER END WITH SUITABLE NECESSARY CONNECTION
9
WIRING WITH 2X1.5 SQMM PVC INSULATEDSINGLE CO INT (FOR ELECTRONIC REGULATOR 4 POINTS/COLL)
10
COST OF SUPPLY OF 18W 4 FEET LED FILLING WITH LED TUBE COMPLETE SET PATTYAND LED TUBE Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
