|
| 1 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 2 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 3 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge . |
| 4 | Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submersible pump set by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 5 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submersible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. |
| 6 | (ii) 4.00 Sqmm |
| 7 | (iii) 6.00 sqmm |
| 8 | Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (conforming to IS : 8034) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 9 | (i)Bronze/SS Impeller |
| 10 | (ii)Bronze grade LTB 2/ cutless rubber bush |
| 11 | (iii)Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 12 | (iv)Stainless steel pump shaft |
| 13 | (v)Cast iron grade (FG200) discharge casing |
| 14 | (vi)Cast iron grade (FG200) Suction casing |
| 15 | (vii)Cast iron grade (FG200) pump bowl/diffuser |
| 16 | (viii)SS Impeller Lock |
| 17 | (ix)SS half coupling |
| 18 | (x)Stud bolt & nut |
| 19 | (xi)Dismantling, repairing, reassembling, servicing |
| 20 | Repair and maintenance of 5000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (conforming to IS : 8034) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 21 | (i)Bronze/SS Impeller |
| 22 | (ii)Bronze grade LTB 2/ cutless rubber bush |
| 23 | (iii)Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 24 | (iv)Stainless steel pump shaft |
| 25 | (v)Cast iron grade (FG200) discharge casing |
| 26 | (vi)Cast iron grade (FG200) Suction casing |
| 27 | (vii)Cast iron grade (FG200) pump bowl/diffuser |
| 28 | (viii)SS Impeller Lock |
| 29 | (ix)SS half coupling |
| 30 | (x)Stud bolt & nut |
| 31 | (xi)Dismantling, repairing, reassembling, servicing |
| 32 | Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (conforming to IS : 8034) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 33 | (i)Bronze/SS Impeller |
| 34 | (ii)Bronze grade LTB 2/ cutless rubber bush |
| 35 | (iii)Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 36 | (iv)Stainless steel pump shaft |
| 37 | (v)Cast iron grade (FG200) discharge casing |
| 38 | (vi)Cast iron grade (FG200) Suction casing |
| 39 | (vii)Cast iron grade (FG200) pump bowl/diffuser |
| 40 | (viii)SS Impeller Lock |
| 41 | (ix)SS half coupling |
| 42 | (x)Stud bolt & nut |
| 43 | (xi)Dismantling, repairing, reassembling, servicing |
| 44 | Lifting of submersible pump motor with delivery assembly by heavy duty chain-pully after dismantaling from delivery line and stacking properly as per direction of the Engineer - in - charge. |
| 45 | Labour charge for fitting fixing and lowering of submersible pump sets with delivery assembly 90⁰ to O⁰ in/c re-fitting with the delivery line etc. as per direction of the Engineer-in-charge. |
| 46 | Supplying and fitting fixing of following spare parts of approved quality suitable for submersible pump motor etc. as per direction of the Engg-in-charge.(a) Full threaded nuts & bolts 12mm dia 50mm long |
| 47 | Supplying and fitting fixing of rubber insertion 3mm thick of 150mm dia to the G.I. column pipes as per direction of the Engg-in-charge. |
| 48 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 49 | iv) 100 x 80 mm dia |
| 50 | v) 80 x 65 mm dia |
| 51 | Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineerin- charge ( G.I. pipe will be provided by the agency at his own cost & risk). |
| 52 | ii. For 65 mm dia G.I. pipe with 10 mm thick GI flange |
| 53 | iii. For 80 mm dia G.I. pipe with 10 mm thick GI flange |
| 54 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge.ii. 63 amps |
| 55 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.(i) 25 HP/18.5 kw Relay range within 13-21 + 10% |
| 56 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the panel board as per specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
