|
| 1 | Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with super enamelled copper conductor (as per IS: 13730 Part-3) Conductor & all necessary spare parts and reassembling the same including servicing of motor & necessary trail run as per specification and direction of the Engineer-in-charge.i. 20 HP |
| 2 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c & rewinding with super enamelled copper conductor ( as per IS: 13730 part -3) conductor & all mecessary spare parts and ressembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer -in-charge.i. 50 HP |
| 3 | Repair and manintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantiling in/c providing & fitting fixing of PVC (IS 8783-1978) insulated electro grade copper (IS : 613-1984) conductor winding in stator & all neceassary spare parts and reassembling the same including servicing of Motor & necessary trial run as per specification and direction of the Engineer-in -charge. |
| 4 | Repair and manintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantiling in/c providing & fitting fixing of PVC (IS 8783-1978) insulate electro grade copper (IS : 613-1984) conductor winding in stator & all neceassary spare parts and reassembling the same including servicing of Motor & necessary trial run as per specification and direction of the Engineer-in -charge. |
| 5 | Repair and manintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submerssible pumpset by complete dismantiling in/c providing & fitting fixing of PVC (IS 8783-1978) insulate electro grade copper (IS : 613-1984) conductor winding in stator & all neceassary spare parts and reassembling the same including servicing of Motor & necessary trial run as per specification and direction of the Engineer-in -charge. |
| 6 | Repair and maintenance of 20 HP/22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantiling in/c providing & fitting fixing of PVC (IS 8783-1978) insulate electro grade copper (IS : 613-1984) conductor winding in stator & all neceassary spare parts and reassembling the same including servicing of Motor & necessary trial run as per specification and direction of the Engineer-in -charge. |
| 7 | Repair and maintenance of 5000 GPH Capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (comforming to IS: 8034 ) and reassembling the same including machining, servicing & necessary trail run as per specification and direction of the Engineer-in-charge. |
| 8 | i. Bronze /SS Impeller |
| 9 | ii. Bronze grade LTB 2 / cutless rubber bush |
| 10 | iii. Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 11 | iv. Stainless steel pump shaft |
| 12 | v. Cast iron grade (FG200) discharge casing |
| 13 | vi. Cast iron grade (FG200) suction casing |
| 14 | vii.Cast iron grade (FG200) pump bowl / diffuser |
| 15 | viii. SS Impeller lock |
| 16 | ix. SS half coupling |
| 17 | x. Stud bolt & nut |
| 18 | xi. Dismantling, repairing, reassembling, servicing |
| 19 | Repair and maintenance of 7500/10000 GPH Capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (comforming to IS: 8034 ) and reassembling the same including machining, servicing & necessary trail run as per specification and direction of the Engineer-in-charge. |
| 20 | i. Bronze /SS Impeller |
| 21 | ii. Bronze grade LTB 2 / cutless rubber bush |
| 22 | iii. Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 23 | iv. Stainless steel pump shaft |
| 24 | v. Cast iron grade (FG200) discharge casing |
| 25 | vi. Cast iron grade (FG200) suction casing |
| 26 | vii.Cast iron grade (FG200) pump bowl / diffuser |
| 27 | viii. SS Impeller lock |
| 28 | ix. SS half coupling |
| 29 | x. Stud bolt & nut |
| 30 | xi. Dismantling, repairing, reassembling, servicing |
| 31 | Repair and maintenance of 2500 GPH Capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts (comforming to IS: 8034 ) and reassembling the same including machining, servicing & necessary trail run as per specification and direction of the Engineer-in-charge. |
| 32 | i. Bronze /SS Impeller |
| 33 | ii. Bronze grade LTB 2 / cutless rubber bush |
| 34 | iii. Bronze grade LTB 2 / 12% chromium steel grade shaft sleeve. |
| 35 | iv. Stainless steel pump shaft |
| 36 | v. Cast iron grade (FG200) discharge casing |
| 37 | vi. Cast iron grade (FG200) suction casing |
| 38 | vii.Cast iron grade (FG200) pump bowl / diffuser |
| 39 | viii. SS Impeller lock |
| 40 | ix. SS half coupling |
| 41 | x. Stud bolt & nut |
| 42 | xi. Dismantling, repairing, reassembling, servicing |
| 43 | Repair and maintenance of submersible Motor suitable for submersible pumpset by complete dismantling in/c providing & fitting fixing of PVC (IS:8783-1978) insulated electro grade copper ( IS:613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of motor & necessary trail run as per specification and direction of the Engineer-in-charge. |
| 44 | i) 2.0 H.P Motor suitable for 2000 GPH capacity submerssible pumpset |
| 45 | ii) 3.0 H.P Motor suitable for 2000/2500 GPH capacity submerssible pumpset |
| 46 | Repairing of V.T pumps by providing & replacing of GM bush for bowel (Conforming to IS:1710) as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 47 | Repairing of V.T pumps by providing & replacing of GM bush for suction case/discharge case (Conforming to IS:1710) as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 48 | Repairing of V.T pumps by providing & replacing of rubber bush for bowel (Conforming to IS:1710) as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 49 | Repairing of V.T pumps by providing & replacing of MS lock (Conforming to IS:1710) as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 50 | Repairing of V.T pumps by providing & replacing of bronze impeller (Conforming to IS:1710) as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 51 | Repairing of V.T pumps by providing & replacing of SS shaft (SS:410) as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 52 | Repairing of V.T pumps by providing & replacing of CI bowel case as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 53 | Repairing of V.T pumps by providing & replacing of CI suction/discharge as per specification and direction of the Engineer-in-charge.i) For 10000 GPH capacity V.T pump |
| 54 | Lifting of submerssible pump with delivery assembly by heavy duty chain-pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. |
| 55 | Labour charge for fitting fixing and lowering of Submerssible pump sets with delivery assembly 900 to 00 in/c re-fitting fixing with the delivery line etc as per direction of the Engineer-in-charge. |
| 56 | Supplying and fitting fixing of following spare parts of approved quality suitable for submerssible pump motor etc as per direction of the Engineer-in-charge.a. Full threaded nuts & bolts 10 mm dia , 50 mm long. |
| 57 | Charges for lifting of pump, motor, column pipe etc. from intake well and stacking the same at suitable place as per specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
